V940ME24-LF PHASE NOISE (1 Hz BW, typical) Rev C3 Voltage-Controlled Oscillator Surface Mount Module Applications • Direct Broadcast • Microwave Links • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5500 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -87 Harmonic Suppression (2nd) -25 Tuning Voltage 0 Tuning Sensitivity (avg.) Power Output Max Units 5850 MHz dBc/Hz -22 dBc 9 Vdc MHz/V 75 0 6 dBm Input Capacitance 50 pF Pushing 9 MHz/V Pulling (14 dB Return Loss, Any Phase) 19 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 3 MINI-14S Min Typ 5 36 Vdc 43 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V940ME24-LF Rev C3 FREQUENCY (MHz) Tuning Curve, typ. 6050 6000 5950 5900 5850 5800 5750 5700 5650 5600 5550 5500 5450 5400 5350 5300 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 0.030 MIN. CUTBACK FROM LIVE PADS 3 2 1 0 5355 5439 5512 5587 5664 5743 5823 5895 5953 5991 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B