AC-DC 5 Watts xppower.com VCP05 Series • Energy Star, CEC & EISA Compliant • ITE Approvals • PCB Mount • Class II Construction • Compact Dimensions • EN55022 Class B Emissions • Low Cost Specification Input Input Voltage Input Frequency Input Current Inrush Current Power Factor General • • • • • 90-264 VAC 47-63 Hz 0.2 A max at 90 VAC 40 A max at 240 VAC Conforms to EN61000-3-2, class A Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Transient Response • • • • • • • • • Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient • • • • • See table ±5% at 50% load No minimum load required 2 s max 100 ms typical 5 ms typical at full load and 115 VAC ±0.5% max ±5% max 10% max. deviation, recovery to <1% within 500 µs for a 50% step load change at 0.2 A/µs See table See table 120-180%, auto recovery Trip and restart (Hiccup mode) 0.2 %/˚C Output 1 Efficiency Isolation Switching Frequency MTBF • • • • See table 3000 VAC Input to Output 60 kHz typical 100 kHrs per MIL-HDBK-217F Environmental Operating Temperature Cooling Operating Humidity Storage Temperature Shock Vibration • • • • • 0 ˚C to +40 ˚C Natural convection 10-90% RH, non-condensing -20 ˚C to +60 ˚C Able to survive 1m drop onto concrete on each of 6 axes • 10-300 Hz, 2 g 15 mins/sweep. 30 mins for each of 3 axes EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity • • • • Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Field Dips & Interruptions • • • • • • Safety Approvals • EN55022, level B conducted & radiated EN61000-3-2, class A EN61000-3-3 EN61000-4-2, ±4kV contact, ±8kV air, Perf Criteria A EN61000-4-3, 3 V/m, Perf Criteria A EN61000-4-4, level 2, Perf Criteria A EN61000-4-5, level 3, Perf Criteria A EN61000-4-6, 3 V, Perf Criteria A EN61000-4-8, 1 A/m, Perf Criteria A EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B EN60950, cUL60950, IEC60950 Output Power Output Voltage 4W 5W 5W 4.8 W 4.5 W 3.3 5 9 12 15 Output Current V V V V V 1.2 1 0.55 0.4 0.3 A A A A A Ripple & Noise(1) 150 150 150 150 150 Overvoltage Trip mV mV mV mV mV 10 10 18 20 25 Model Number Efficiency V V V V V 55% 57% 65% 65% 65% VCP05US033 VCP05US05 VCP05US09 VCP05US12 VCP05US15 Notes 1. Measured at DC output lead using 20 MHz band width and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals 2. Other voltages between 3.0 V and 15.0 V are available, consult sales for details. Mechanical Details 2.3 (58.5) 1.15 (29.25) 1.05 (26.7) 0.75 (19.1) 0.59 (15) 0.19 (4.8) 1 1.4 (35.5) 4 0.05 (1.2) 0.62 (15.8) 5 3 1.01 (25.7) 2 0.4 (10) 0.15 (3.80) 0.18 (4.50) 0.67 (17.02) 0.06 (1.60) 0.99 (25.2) ø 0.040 (ø1.00) ø 0.070 (ø1.80) Pin Designation 1 Live 2 Neutral 3 No connection 4 Output -VE 5 Output +VE Notes 1. All measurements are in inches (mm). 2. Weight: 20g approx. 3. Tolerance: x.x = ±0.02 (x.x = ±0.5), x.xx = ±0.01 (x.xx = ±0.25) 04-Sep-09 AC-DC VCP05 Models and Ratings