AC-DC DIN Rail 50-200 Watts THE XPERTS IN POWER DRF Series Input 187-528 VAC 1Ø • • Adjustable Output • High Peak Current Capability • Overvoltage Protection • Overcurrent Protection • International Safety Approvals Specification Input Input Voltage • Input Frequency Input Current Inrush Current • • • Power Factor • Leakage Current • 187-528 VAC single phase (264-746 DC) 47-63 Hz 1.1 A max @ 240 VAC 25/50 A typical @ 240/480 VAC cold start +25 °C 0.98/0.93 typical at 240/480 VAC for DRF200 0.75 mA max (1.5 mA DRF200) Output Voltage Output Voltage Adjustment Minimum Load Start Up Time Hold Up Time • • 24 VDC nominal ±10% • • • Drift Line Regulation Load Regulation • • • Ripple & Noise • Overvoltage Protection • Overcurrent Protection Temperature Coefficient Thermal Protection • • No minimum load required 800 ms max with 240 VAC 10 ms (100 ms DRF200) typical at 240 VAC & 100% load ±100 mV max 96 mV max 150 mV 0-100% load, 480 mV max 0-peak load 680 mV pk-pk max 20 MHz bandwidth & 100% load 115-150% of nominal rating, recycle input to reset 240 VAC & 100% load >105% of peak current, auto recovery 0.04%/°C • Recycle input to reset Output General Efficiency Isolation • • Switching Frequency • 82% typical at 240 VAC 3000 VAC Input to Output 2000 VAC Input to Ground 500 VAC Output to Ground 120 kHz PWM, 50 kHz PFC (DRF200) Environmental Operating Temperature Storage Temperature Humidity Shock Vibration • • -10 °C to +70 °C (+60 °C DRF200) Contact Technical Sales for derating -20 °C to +75 °C • • • 20-90% non condensing 20 G, 11 ms once on the X axis 2 G 10-55 Hz 3 axis Emissions • ESD Susceptability Radiated Susceptibility EFT/Burst Surge Safety Approvals • • EN55022 Level A conducted EN55022 Level A radiated EN61000-4-2 Level 2 (Level 4 DRF200) EN61000-4-3 Level 3 • • • EN61000-4-4 Level 4 EN61000-4-5 Level 3 UL1950, cUL, EN60950, EN50178 EMC & Safety • • www.xpplc.com [email protected] OUTPUT VOLTAGE & CURRENT RATINGS Output Voltage 21.6 - 26.4 V 21.6 - 26.4 V 21.6 - 26.4 V DRF Output Current Nominal 2.1 A 3.1 A 8.4 A Model Number DRF50US24-N1 DRF75US24-N1 DRF200PS24-N1 Peak(1) 6.7 A 10.0 A 42.0 A Notes 1. Peak current for 150 ms in every 30 second period. Only available with an input voltage of 240 to 528 VAC. • Mechanical Details DRF50 Model Weight: <630g DRF200 Model Weight: <1700g DRF75 Model Weight:<750g Peak Loading Curves NOTE: ( ) for DRF200 models www.xpplc.com t ≤ 150 ms, 30 s ≤ T (t ≤ 50 ms, 30 s ≤ T DRF200) [email protected] Rev 3.0