ETC VI-BTL-EV

12 1-800-735-6200
VI-200
DC-DC Converters
50 to 200 Watts
Converter Selection Chart
VI-2
Features
■ Up to 50W/Cubic Inch
■ UL, CSA, TÜV, VDE, BABT,
AUSTEL
■ 80-90% Efficiency
■ Size: 4.6" x 2.4" x 0.5"
(116,8 x 61,0 x 12,7)
■ Remote Sense and Current Limit
■ OVP, Thermal Shutdown
■ Logic Disable
■ Wide Range Output Adjust
■ Compatible Power Booster Modules
■ ZCS Power Architecture
■ Low Noise FM Control
■ CE Marked
Product Highlights
The VI-200 Family, with over 8 million
shipped, is Vicor’s first generation of
“zero-current-switching” component-level
DC-DC converters.
Operating at frequencies up to 2 MHz,
VI-200 Family Converters offer
exceptional power density, efficiency,
noise performance, reliability and ease of
use. Power Boosters provide a simple, cost
effective, off-the-shelf solution for higher
power output requirements. One or more
boosters may be used to create synchronous
arrays capable of supplying several
kilowatts of output power.
The flexibility of Vicor’s power components
is also available in half-size, half-power
VI-J00 MiniMods. (pg. 72)
Packaging Options
SlimMods™, high power density,
flangeless packages and FinMods™,
featuring integral finned heatsinks.
SlimMod: Option suffix: - S
Example: VI - 2XX - XX - S
FinMod: Option suffix: - F1 and - F2
0
1
W
2
3
N
4
T
5
6
7
=
12V
=
24V
=
24V
=
36V
=
48V
=
48V
=
72V
=
110V
=
150V
=
300V
= 150/300V
10
21
18
21
42
36
55
66
100
200
100
-
20V
32V
36V
56V
60V
76V
100V
160V
200V
400V
375V
(1)
(4)
(2)
(3)
(4)
(4)
(5)
(2)
(5)
(4)
(6)
n/a
18V
n/a
18V
36V
n/a
45V
n/a
85V
170V
90V
-10°C to
-25°C to
-40°C to
-55°C to
+85°C
+85°C
+85°C
+85°C
E
C
I
M
=
=
=
=
-20°C to +100°C
-40°C to +100°C
-55°C to +100°C
-65°C to +100°C
5V Outputs
75W
150W
100W
> 5V Outputs
75W
150W
100W
=
=
=
=
=
=
=
=
=
2V
3.3V
5V
10V
12V
15V
24V
28V
48V
1 to 95V, consult factory.
VOUT ≥ 5V
Y
=
50W
X
=
75W
W
= 100W
V
= 150W
U
= 200W
Y
X
W
V
U
VOUT < 5V
=
10A
=
15A
=
20A
=
30A
=
40A
For additional output power use “Boosters”.
Change (VI-2xx-xx) to (VI-Bxx-xx).
Overtemperature shutdown 95°C typical
(recycle power to restart).
Max. Output For
(1)
(2)
(3)
Z
Y
0
M
1
2
3
L
4
22V
36V
n/a
60V
72V
n/a
110V
n/a
215V
425V
n/a
Output Power/Current
Product Grade/ Product Grade/
Operating Temp. Storage Temp.
E =
C =
I =
M=
Output Voltage
Input Voltage
Range
Brownout /Transient*
Nominal
< 5V Outputs
15A
30A
20A
Max. Output For
(4)
(5)
(6)
5V Outputs
200W
150W
75W
> 5V Outputs
200W
200W
100W
* Brownout 75% of rated load; transient voltage for 1 second.
Mechanical Drawing
.50
(12,7)
.30 (7,6)
±.015 (0,38)
2.10
(53,3)
.15
(3,8)
4.60 (116,8)
3.60 (91,4)
.080 (2,0) Dia (2) places
Solder plate
over copper alloy
1.80
(45,7)
4
9
3
2
8
7
6
1
5
VI-200
FULL R
.15
(3,8)
Product ID
this surface
1.40
1.00 (35,6)
.70 (25,4)
(17,8)
.40
(10,2)
.35 (8,9)
±.015 (0,38)
.040 (1,0) Dia (7) places
Solder plate
over copper alloy
Pin #
1
2
3
4
5
6*
7*
8*
9
Function
+In
Gate In
Gate Out
-In
+Out
+Sense
Trim
-Sense
-Out
* Do not connect on
Booster modules
2.40 (61,0)
4.20 (106,7)
Examples:
VI - 2XX - XX -F1, 0.75" height
VI - 2XX - XX -F2, 1.00" height
.22 (5,6) MIN
.50 (12,7)
.30 (7,6)
Min
1.75 (44,5)
+.030 (0,76)
-.000
.01
.12 (3,0)
70
< 5V Outputs
40A
40A
20A
Aluminum Base
12 1-800-735-6200
Converter Specifications
(typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified)
VI-200 E-Grade
PARAMETER
MIN.
■ Input Characteristics
Inrush charge
Input reflected ripple current – pp
■ Dielectric Withstand Characteristics
Input to output
Output to baseplate
Input to baseplate
■ Thermal Characteristics
Efficiency
Baseplate to sink
Thermal shutdown4
(Drivers only)
■ Mechanical Specifications
Weight
MIN.
MAX.
( )
( )
UNITS
TEST CONDITIONS
Coulombs
IIN
Nominal line
Nominal line, full load
dB
120 Hz, nominal line
dB
2400 Hz, nominal line
1.35
2
1.35
2
Watts
1%
2%
0.5%
1%
0.5%
0.05%
0.2%
0.01
0.02
1%
0.2%
0.5%
0.02
VNOM
VNOM
VNOM
% / °C
%/1K hours
150 mV
5%
3%
110%
60 mV
2%
0.75%
100 mV
3%
1.5%
110%
125%2
135%
125%
130%
0.02
0.02
50%
0.5
125%2
105%
20%
135%
140%
50%
0.5
115%
105%
20%
50
10 3
6
50
10 3
6
0.65
0.65
6
1.05
0.95
3,000
500
1,500
90
TYP.
120x10 -6 200x10-6
10%
30+20Log Vin
Vout
20+20Log Vin
Vout
( )
No load power dissipation
■ Control Pin Characteristics
Gate out impedance
Gate in impedance
Gate in open circuit voltage
Gate in low threshold
Gate in low current
Power sharing accuracy
VI-200 C-, I-, M-Grade
MAX.
120x10 -6
10%
25+20Log Vin
Vout
Input ripple rejection
■ Output Characteristics
Setpoint accuracy
Load/line regulation
Load/line regulation
Output temperature drift
Long term drift
Output ripple - pp:
2V, 3.3V
5V
10-48V
Trim range1
Total remote sense compensation
OVP set point
Current limit
Short circuit current 3
TYP.
6
1.05
0.95
3,000
500
1,500
78-88%
0.2
95
6.0 (170)
105
90
20 MHz bandwidth
20 MHz bandwidth
20 MHz bandwidth
Volts
VNOM
INOM
INOM
Ohms
Ohms
Volts
Volts
mA
VRMS
VRMS
VRMS
80-90%
0.2
95
6.0 (170)
105
LL to HL, 10% to Full Load
LL to HL, No Load to 10%
Over rated temp.
°C/Watt
°C
0.25V max. neg. leg
Recycle power
Automatic restart
Use open collector
Baseplate earthed
With Vicor P/N 01777
Cool and recycle power
to restart
Ounces (Grams)
1
10V, 12V and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.
131% nominal for booster modules.
3 Output voltages of 5V or less incorporate foldback current limiting; outputs of 10V and above provide constant current limiting.
4 No overtemp protection in booster modules.
2
71