VJ High Q Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency Applications FEATURES • C0G is an ultra-stable dielectric offering a Temperature Coefficient of Capacitance (TCC) of 0 ± 30 ppm/°C over the entire temperature range • Low Dissipation Factor (DF) RoHS COMPLIANT • Surface mount, precious metal technology, wet build process APPLICATIONS • Ideal for critical timing applications • Ideal for tuning applications ELECTRICAL SPECIFICATIONS Note: Electrical characteristics at + 25 °C unless otherwise specified Insulation Resistance (IR): At + 25 °C and rated voltage 100 000 MΩ minimum or, 1000 ΩF whichever is less. At + 125 °C and rated voltage 10 000 MΩ minimum or 100 ΩF, whichever is less. Operating Temperature: - 55 °C to + 125 °C Voltage Range: 50 Vdc to 200 Vdc Capacitance Range: 1.0 pF to 220 pF Temperature Coefficient of Capacitance (TCC): 0 ± 30 ppm/°C from - 55 °C to + 125 °C Dissipation Factor (DF): 0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF 0.1 % maximum at 1.0 Vrms and 1 MHz for values ≤ 1000 pF Aging Rate: 0 % maximum per decade Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50 mA ≤ 200 Vdc: DWV at 250 % of rated voltage DIMENSIONS in inches [millimeters] W L T MAX. P PART ORDERING NUMBER LENGTH (L) 0603 VJ0603 0.063 ± 0.005 [1.60 ± 0.12] 0.031 ± 0.005 [0.80 ± 0.12] 0805 VJ0805 0.079 ± 0.008 [2.00 ± 0.20] 0.049 ± 0.008 [1.25 ± 0.20] EIA STYLE www.vishay.com 48 WIDTH (W) MAXIMUM THICKNESS (T) TERMINATION (P) MINIMUM MAXIMUM 0.036 [0.92] 0.012 [0.30] 0.018 [0.46] 0.057 [1.45] 0.010 [0.25] 0.028 [0.71] For technical questions, contact: [email protected] Document Number: 45050 Revision 20-Feb-08 VJ High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency Applications Vishay Vitramon ORDERING INFORMATION VJ0805 CASE CODE Q DIELECTRIC 101 CAPACITANCE NOMINAL CODE 0603 0805 Q = High Q Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples: 101 = 100 pF 1R8 = 1.8 pF K CAPACITANCE TOLERANCE X TERMINATION B = ± 0.10 pF X = Ni barrier 100 % tin plated C = ± 0.25 pF A DC VOLTAGE RATING (1) A MARKING C PACKAGING A = 50 V A = Unmarked ### (2) PROCESS CODE B = 100 V C = 200 V D = ± 0.5 pF F=±1% G=±2% H=±3% J=±5% C = 7" reel/paper tape 0603: PU = 4000 pieces 0805: PU = 3000 pieces P = 11 1/4" reel/paper tape PU = 10 000 pieces K = ± 10 % Note: B, C, D < 10 pF F, G, H ≥ 10 pF J, K ≥ 10 pF Size 0402 available with Vishay Commodity series, see datasheet: http://www.vishay.com/doc?28534 Notes: (1) DC voltage rating should not be exceeded in application (2) Process code may be added with up to three digits, used to control non-standard products and/or special requirements SELECTION CHART STYLE EIA TYPE VOLTAGE (Vdc) CAP. CODE 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 CAP. 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF 47 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 50 VJ0603 0603 100 •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 200 50 VJ0805 0805 100 •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 200 •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• Note: See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 •• Available in paper carrier tape only Document Number: 45050 Revision: 20-Feb-08 For technical questions, contact: [email protected] www.vishay.com 49 VJ High Q Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency Applications HIGH Q DIELECTRIC - TYPICAL PARAMETERS SERIES RESONANT FREQUENCY - HIGH Q TEMPERATURE COEFFICIENT OF CAPACITANCE 2.0 RESONANT FREQUENCY (GHz) 10 % CAPACITANCE CHANGE 1.5 1.0 0.5 0.0 - 0.5 HIGH Q - 1.0 - 1.5 - 2.0 0603 1 0805 0.1 - 75 - 50 - 25 0 25 50 75 1 100 125 10 100 1000 CAPACITANCE (pF) TEMPERATURE °C Q VS. FREQUENCY - VJ0805, 50 V ESR VS. FREQUENCY - VJ0805, 50 V 10 000 1 10 pF ESR (Ω ) Q 1000 100 100 pF 10 pF 0.1 10 100 pF 1 0.01 1000 100 FREQUENCY (MHz) www.vishay.com 50 100 For technical questions, contact: [email protected] FREQUENCY (MHz) 1000 Document Number: 45050 Revision: 20-Feb-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1