WINBOND W83310U

Winbond
Bus Termination Regulator
W83310U
W83310UG
W83310U, W83310UG
W83310U
Data Sheet Revision History
DATES
VERSION
VERSION
ON WEB
MAIN CONTENTS
1.
03/Mar.
0.5
N.A.
All versions before 0.5 are for internal use
only
2.
04/Feb.
0.51
N.A.
Add the thermal data inside
3
05/Mar.
0.6
N.A
Update the package dimension data.
4
06/Jan.
0.7
N.A
Add pb-free part no:W83310UG
PAGES
Please note that all data and specifications are subject to change without notice. All the trademarks of
products and companies mentioned in this datasheet belong to their respective owners.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where
malfunction of these products can reasonably be expected to result in personal injury. Winbond
customers using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify Winbond for any damages resulting from such improper use or sales.
-I-
Publication Release Date: January 17, 2006
Revision 0.7
W83310U, W83310UG
Table of Contents1.
GENERAL DESCRIPTION ......................................................................................................... 1
2.
FEATURES ................................................................................................................................. 1
3.
APPLICATIONS .......................................................................................................................... 1
4.
PIN CONFIGURATION AND DESCRIPTION ............................................................................ 2
5.
APPLICATION CIRCUIT............................................................................................................. 3
6.
INTERNAL BLOCK DIAGRAM ................................................................................................... 4
7.
ELECTRICAL CHARACTERISTICS........................................................................................... 5
7.1
AC CHARACTERISTICS................................................................................................ 5
8.
TYPICAL OPERATING WAVEFORM......................................................................................... 6
9.
PACKAGE DIMENSION (TO252-5L).......................................................................................... 8
10.
THERMAL PERFORMANCE...................................................................................................... 9
11.
ORDERING INFORMATION ...................................................................................................... 9
12.
HOW TO READ THE TOP MARKING........................................................................................ 9
-II-
W83310U, W83310UG
1. GENERAL DESCRIPTION
The W83310U is a linear regulator which provides achieves continuous 2.0 Amp bi-directional sinking
and driving capability for DDR SDRAM bus terminator application. The chip simply implement a stable
power supply which can track half of input power dynamically for bus terminator with a single chip; that
is the chip integrates two power MOSFETs. There is no any external power device needed. The
W83310U is promoted with TO252 power package. With W83310U design, a high integration, high
performance, and cost-effective solution is promoted.
2. FEATURES
y
Regulates a bi-directional power with driving and sinking capability
y
Provides achieve continuous 2.0Amp driving and sinking current
y
Power MOSFET integrated
y
Low external component count
y
Low output voltage offset
y
Operates with +3.3V and +2.5V control power
y
Power package TO252-5L
y
Low cost and easy to use
3. APPLICATIONS
y
DDR and DDR II Bus Termination Regulator
y
Active Termination Bus
y
SSTL-2
y
SSTL-3
-1-
Publication Release Date: January 17, 2006
Revision 0.7
W83310U, W83310UG
4. PIN CONFIGURATION AND DESCRIPTION
inbond
1
2
3
4
5
VIN
GND
VCTRL
VREF
VOUT
W83310U
SYMBOL
PIN
VIN
1
Power input pin.
FUNCTION
GND
2
Ground.
VCNTL
3
Gate drive voltage.
VREF
4
Reference voltage and Chip enable.
VOUT
5
Output voltage.
-2-
W83310U, W83310UG
5. APPLICATION CIRCUIT
2.5V
3.3V
2.5V
U1
C1
1u
1
C2
1000u 2
R1
10K
3
3
4
Q1
1
2N7002
R3
5
C4
1u
10K
C5
1500u
GND
VCNTL(TAB)
VREF
VOUT
W83310U
2
ENABLE#
C3
1u
VIN
-3-
Publication Release Date: January 17, 2006
Revision 0.7
W83310U, W83310UG
6. INTERNAL BLOCK DIAGRAM
- W83310U
VCNTL
VREF
Control
Logic
Circuit
GND
-4-
VIN
VOUT
W83310U, W83310UG
7. ELECTRICAL CHARACTERISTICS
7.1
AC CHARACTERISTICS
W83310U
VIN=2.5V,VCNTL=3.3V,VREF=1.25V,Cout=100uF, TA = 0°C to +70°C
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
Output Offset Voltage
VOS
-5
0
+5
mV
1.0
Load Regulation
Input Voltage Range
Operating Current of
VCNTL
1.62
%
2.5
3.63
VCNTL
3.3
3.63
ICNTL
0.5
1.0
0.8
Shutdown Threshold
Trigger
0.2
Shutdown Current
ISHDN
Short Current Limit
ILMT
10
4.0
IOUT=0A
Loading: 0AÆ2.0A
1.0
VIN
TEST
CONDITIONS
Loading:
2.0A
0AÆ-
V
mA
No Load(IOUT=0A)
V
Output=High
V
Output=Low
uA
VREF<0.2V
Loading=0.7A
A
Note: Load regulation is tested with a 1ms duty pulse current and measuring VOUT.
-5-
Publication Release Date: January 17, 2006
Revision 0.7
W83310U, W83310UG
8. TYPICAL OPERATING WAVEFORM
-- Load regulation with test condition - VCTRL=3.3V; VIN=2.5V; VOUT=1.25V; 3.0Amp 1ms duty pulse
driving current. ∆V ≈ 50mV.
-- Load regulation with test condition - VCTRL=3.3V; VIN=2.5V; VOUT=1.25V; 3.0Amp 1ms duty pulse
sinking current. ∆V ≈ 5mV.
-6-
W83310U, W83310UG
-- Load regulation with test condition - VCTRL=3.3V; VIN=2.5V; VOUT=1.25V; 2.0Amp cont. driving
current. ∆V ≈ 20mV.
-- Load regulation with test condition - VCTRL=3.3V; VIN=2.5V; VOUT=1.25V; 2.0Amp cont. sinking
current. ∆V ≈ 2mV
-7-
Publication Release Date: January 17, 2006
Revision 0.7
W83310U, W83310UG
9. PACKAGE DIMENSION (TO252-5L)
-8-
W83310U, W83310UG
10. THERMAL PERFORMANCE
Test on Four-Layer (2S2P) JEDEC Test Board
Component Temp. (oC)
Package
TO-252-5L
Θ jc
Power (W)
Package
Die
Downset
Lead
Ambient
(oC /W)
96
145
79
78
25
15.5
3.18
11. ORDERING INFORMATION
PART NUMBER
PACKAGE TYPE
W83310U
5L TO-252
PRODUCTION FLOW
12. HOW TO READ THE TOP MARKING
W83310U
316GB
W83310UG
316GB
Left line: Winbond logo
1st line: W83310U, W83310UG (Pb-free package) – the part number
2nd line: Tracking code Tracking code 316 G B
316: Packages assembled in Year 03’, week 16
G: assembly house ID; O means OSE, G means GR, etc.
B: The IC version
-9-
Publication Release Date: January 17, 2006
Revision 0.7
W83310U, W83310UG
Important Notice
Winbond products are not designed, intended, authorized or warranted for use as components
in systems or equipment intended for surgical implantation, atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal
instruments, combustion control instruments, or for other applications intended to support or
sustain life. Further more, Winbond products are not intended for applications wherein failure
of Winbond products could result or lead to a situation wherein personal injury, death or
severe property or environmental damage could occur.
Winbond customers using or selling these products for use in such applications do so at their
own risk and agree to fully indemnify Winbond for any damages resulting from such improper
use or sales.
Headquarters
Winbond Electronics Corporation America
Winbond Electronics (Shanghai) Ltd.
No. 4, Creation Rd. III,
Science-Based Industrial Park,
Hsinchu, Taiwan
TEL: 886-3-5770066
FAX: 886-3-5665577
http://www.winbond.com.tw/
2727 North First Street, San Jose,
CA 95134, U.S.A.
TEL: 1-408-9436666
FAX: 1-408-5441798
27F, 2299 Yan An W. Rd. Shanghai,
200336 China
TEL: 86-21-62365999
FAX: 86-21-62365998
Taipei Office
Winbond Electronics Corporation Japan
Winbond Electronics (H.K.) Ltd.
9F, No.480, Rueiguang Rd.,
Neihu District, Taipei, 114,
Taiwan, R.O.C.
TEL: 886-2-8177-7168
FAX: 886-2-8751-3579
7F Daini-ueno BLDG, 3-7-18
Shinyokohama Kohoku-ku,
Yokohama, 222-0033
TEL: 81-45-4781881
FAX: 81-45-4781800
Unit 9-15, 22F, Millennium City,
No. 378 Kwun Tong Rd.,
Kowloon, Hong Kong
TEL: 852-27513100
FAX: 852-27552064
Please note that all data and specifications are subject to change without notice.
All the trade marks of products and companies mentioned in this data sheet belong to their respective owners.
-10-