KINGBRIGHT WP103SRDT

2mmx5mm RECTANGULAR SOLID LAMP
WP103SRDT
Features
SUPER BRIGHT RED
Description
LOW POWER CONSUMPTION.
The Super Bright Red source color devices are made with
RELIABLE AND RUGGED.
Gallium Aluminum Arsenide Red Light Emitting Diode.
EXCELLENT UNIFORMITY OF LIGHT OUTPUT.
SUITABLE FOR LEVEL INDICATOR.
LONG LIFE - SOLID STATE RELIABILITY.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAF2573
REV NO: V.1
DATE: APR/19/2005
PAGE: 1 OF 3
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101000399
Selection Guide
Part No.
Dice
WP103SRDT
Iv (mcd)
@ 20mA
Lens Type
SUPER BRIGHT RED (GaAIAs)
Viewing
Angle
Min.
Typ.
2θ
θ1/2
36
80
110°
RED DIFFUSED
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Super Bright Red
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
660
nm
IF=20mA
Super Bright Red
640
nm
IF=20mA
Spectral Line Half-width
Super Bright Red
20
nm
IF=20mA
C
Capacitance
Super Bright Red
45
pF
VF=0V;f=1MHz
VF
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Red
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Red
Units
Power dissipation
100
mW
DC Forward Current
30
mA
Peak Forward Current [1]
155
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAF2573
REV NO: V.1
DATE: APR/19/2005
PAGE: 2 OF 3
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101000399
Super Bright Red
WP103SRDT
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF2573
REV NO: V.1
DATE: APR/19/2005
PAGE: 3 OF 3
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101000399