WS2.1 Position Sensor with Analog or A/D converted synchronous serial output Compact Sensor for Medium Ranges • Protection Class IP50 • Measurement Range: 0 ... 1500 mm to 0 ... 2500 mm 0 ... 59.06 in to 0 ... 98.43 in • With Analog Output or A/D Converter with synchronous serial output n Disco t mo inued del p evelo d r e h rt T for fu by WS17K e s u Don`t Replaced Outputs Specifications ment s Potentiometer: 1 kΩ Voltage: 0...10 V Current: 4...20 mA, 2 or 3 wire A/D Converter synchronous serial 12 Bit RS-485 Resolution Essentially inifinite / ADSI: 12 Bit Full Scale Material Aluminium and Stainless Steel Cable: Stainless Steel Sensing Device Connector Linearity Order Code WS2.1 Analog Precision Potentiometer Male Socket 8 pin DIN 45326 Up to ±0,05 % Full Scale Protection class (IEC 529) IP50 Weight Environmental 1.8 kg approx. Immunity to Interference Refer to Output Specification Temperature Humidity Refer to Output Specification 90 % R.H. max. non condensing Shock 50 g’s max. for 6 ms Duration Vibration 10 g’s max. (1 Hz - 2000 Hz) WS2.1 Model Name Measurement Range (in mm) 1500 / 2000 / 2500 Outputs R1K = Potentiometer 1 kΩ (other Values on Request, i.e. 500Ω ) 10V = with 0 ... 10 V Signal Conditioner 420A = with 4 ... 20 mA Signal Conditioner (2 wire) 420T = with 4 ... 20 mA Signal Conditioner (3 wire) ADSI = with A/D Converter synchronous serial output 12 Bit / RS-485 Linearity L10 = ±0.10 % L05 = ±0.05 % Options (see catalog) Order Code Mating Connector WS-CONN-D8 Order Example: WS2.1 - 2500 - 10V - L10 1 KAT-WS-E-96 ASM GmbH WS2.1 Position Sensor with Analog or A/D converted synchronous serial output Cable Forces typical at 20 °C Range [mm in] 1500 2000 2500 Maximum Pull-out Force [N] Minimum Pull-in Force [N] 10.2 8.4 7.2 6.7 5.4 4.8 59.06 78.74 98.43 Mounting aid ∅18 [dia. 0.71] removable Dimensions in brackets are inches. For guaranteed dimensions consult factory Dimensions (mm) Dimensions (in) ASM GmbH Range A 1500 2000 2500 24.5 16.5 8.5 59.06 78.74 98.43 0.96 0.65 0.33 KAT-WS-D-96 2 WS2.1 Position Sensor with Incremental Encoder Compact Sensor for Medium Ranges • Protection Class IP50 • Measurement range: 0 ... 2500 mm 0 ... 98.43 in • Incremental Encoder Output n Disco mo d e u n ti del m velop e d r furthe S17KT r o f e us by W Don`t Replaced Outputs Incremental Encoder Output with differential Push-pull Circuit for reliable Data Transmission. The output is compatible with LD, TTL and CMOS. Resolution 5 or 10 pulses per mm; 127 or 254 pulses per in. Distance between Reference Pulses Material 200 mm; 7.87 in Aluminium and Stainless Steel. Cable: Stainless Steel Sensing Device Connector Incremental encoder Male Socket 8 pin DIN 45326 Linearity ±0,05 % Full Scale Specifications Order Code WS2.1 Incremental ents Protection Class (IEC 529) IP50 Weight Environmental 1.8 kg approx. Immunity to Interference (EMC) Refer to Output Specification Temperature Humidity Refer to Output Specification 85 % R.H. max. non condensing Shock 30 g’s for 11 ms Duration Vibration 10 g’s max. (50 Hz / 1 h) WS2.1 PP530 Model Name Measurement Range (in mm) 2500 (smaller measurement ranges included) Pulses per mm 5 = 5 Pulses per mm; 127 pulses per in 10 = 10 Pulses per mm; 254 pulses per in Output Order Code Mating Connector WS-CONN-D8 Order Example: WS2.1 - 2500 - 5 - PP530 3 KAT-WS-E-96 ASM GmbH WS2.1 Position Sensor with Incremental Encoder Cable Forces typical at 20 °C Range [mm in] 2500 98.43 Maximum Pull-out Force [N] Minimum Pull-in Force [N] 8.6 5.7 Mounting aid ∅18 [dia. 0.71] removable Dimensions in brackets are inches. For guaranteed dimensions consult factory ASM GmbH KAT-WS-D-96 4