440 440-030 EMI/RFI Banding and Shrink Boot Adapter Rotatable Coupling - Standard Profile 440 F S 030 M 20 12-8 B P T CONNECTOR DESIGNATORS A-F-H-L ROTATABLE COUPLING Shrink Boot (Table IV Omit for none) Product Series Connector Designator Polysulfide (Omit for none) Angle and Profile H = 45 J = 90 S = Straight B = Band K = Precoiled Band (Omit for none) Finish (Table II) Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Shell Size (Table I) Cable Entry (Table IV) Basic Part No. Length ** Length ± .060 (1.52) Min. Order A Thread Length 2.0 inch (Table I) O-Ring ** Length ± .060 (1.52) Min. Order Length 1.5 inch .135 (3.4) (See Note 4) .075 (1.9) Ref. C Typ. (Table I) K* M* L* .060 (1.5) STYLE 2 (STRAIGHT See Note 1) * (Table IV) .380 (9.7) .88 (22.4) Max E G (Table III) (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) Band Option (K Option Shown See Note 6) © 2005 Glenair, Inc. H (Table III) Termination Area Free of Cadmium. Knurl or Ridges Mfr's Option Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 440 - Page 12 440 440-030 EMI/RFI Banding and Shrink Boot Adapter Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E *** G *** F H *** Conn. Desig. Max Max Max Max H A-F-L .531 (13.5) .639 (16.2) 1.110 (28.2) .940 (23.9) 08 09 .594 (15.1) 1.000 (25.4) .664 (16.9) 1.140 (29.0) 11 10 .618 (15.7) 1.050 (26.7) .688 (17.5) 1.160 (29.5) 13 12 .656 (16.7) 1.090 (27.7) .705 (17.9) 1.190 (30.2) 14 15 .688 (17.5) .732 (18.6) 1.210 (30.7) 1.150 (29.2) 17 16 .748 (19.0) 1.190 (30.2) .803 (20.4) 1.221 (31.0) 18 19 .773 (19.6) 1.250 (31.8) 1.031 (26.2) 1.281 (32.5) 21 20 .800 (20.3) 1.320 (33.5) 1.156 (29.4) 1.351 (34.3) 23 22 .823 (20.9) 1.380 (35.1) 1.219 (31.0) 1.410 (35.8) 24 25 1.041 (26.4) 1.500 (38.1) 1.281 (32.5) 1.531 (38.9) 28 1.092 (27.7) 1.620 (41.1) 1.593 (40.5) 1.651 (41.9) 32 1.136 (28.9) 1.750 (44.5) 1.718 (43.6) 1.781 (45.2) 36 *** These maximum dimensions are increased by .187 (4.7) when parts are fabricated from stainless steel, and connector designator is “S”. TABLE IV: CABLE ENTRY Dash L M K No. 01 .125 (3.2) .250 (6.4) .312 (7.9) 31 .188 (4.8) .312 (7.9) .374 (9.5) 02 .250 (6.4) .375 (9.5) .437 (11.1) 32 .312 (7.9) .438 (11.1) .500 (12.7) .500 (12.7) .562 (14.3) 03 .375 (9.5) 33 .438 (11.1) .562 (14.3) .624 (15.8) 04 .500 (12.7) .625 (15.9) .687 (17.4) 34 .562 (14.3) .688 (17.5) .750 (19.1) 05 .625 (15.9) .750 (19.1) .812 (20.6) .812 (20.6) .874 (22.2) 35 .688 (17.5) 06 .750 (19.1) .875 (22.2) .937 (23.8) .938 (23.8) 1.000 (25.4) 36 .812 (20.6) 07 .875 (22.2) 1.000 (25.4) 1.062 (27.0) 37 .938 (23.8) 1.062 (27.0) 1.124 (28.5) 08 1.000 (25.4) 1.125 (28.6) 1.187 (30.1) 38 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) 09 1.125 (28.6) 10 1.250 (31.8) 1.375 (34.9) 1.437 (36.5) 11 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 12 1.500 (38.1) 1.625 (41.3) 1.687 (42.8) 13 1.625 (41.3) 1.750 (44.5) 1.812 (46.0) 1.875 (47.6) 1.937 (49.2) 14 1.750 (44.5) 15 1.875 (47.6) 2.000 (50.8) 2.062 (52.4) 16 2.000 (50.8) 2.125 (54.0) 2.187 (55.5) **** Raychem Shrink Boot Supplied with "T" Option (see Part Number Development) © 2005 Glenair, Inc. Shrink Boot **** n/a 202K121-25-0 202K121-25-0 202K121-25-0 202K121-25-0 202K132-25-0 202K132-25-0 202K132-25-0 202K132-25-0 202K142-25-0 202K142-25-0 202K153-25-0 202K153-25-0 202K153-25-0 202K153-25-0 202K163-25-0 202K163-25-0 202K163-25-0 202K174-25-0 202K174-25-0 202K174-25-0 202K185-25-0 202K185-25-0 202K185-25-0 CAGE Code 06324 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Interface O-Ring not supplied with Connector Designator A. 4. Consult factory for shorter lengths on straight backshells. 5. See page 40 Shrink Boot Reference Information. 6. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Now Available with the NESTOR Add “-445” to Specify Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 440 - Page 13