xr XRK39653 PRELIMINARY 3.3V, 8-OUTPUT ZERO DELAY BUFFER FEBRUARY 2006 REV. P1.0.0 XRK39653 GENERAL DESCRIPTION The XRK39653 is a low voltage high performance PLL based zero delay buffer/clock generator designed for high speed clock distribution applications. It provides 9 low skew, low jitter outputs ideal for networking, computing and telecom applications. The PLL based design allows the 9 outputs (8 clock outputs and 1 feedback output) to be phase aligned to the input reference clock. The outputs source LVCMOS compatible levels and can drive 50Ω transmission lines. If series termination is used, each output can drive up to 2 lines providing effectively a fanout of 1:16. The XRK39653’s reference input accepts a LVPECL clock source. For normal operation (PLL used to source the outputs), the feedback output (QFB) is connected to the feedback input (FB_IN). The VCO range of operation is 200 to 500MHz. This means that the input/output ranges are determined by the divider setting. If ÷4 is used, the input/output range is 50 to 125MHz (high range), if ÷8 is used the input/output range is 25 to 62.5MHz (low range). For testing purposes two PLL bypass modes are provided. The first simply replaces the PLL output with the reference clock (PLL_EN=0, BYPASS=1). The dividers are still in use. The second is a full bypass mode that has the PLL and divider operation removed (BYPASS=0). In this mode the reference clock directly sources the outputs drivers. FEATURES • • • • 8 LVCMOS Clock Outputs 1 Feedback Output LVPECL reference clock input 25-200 MHz input/output frequency range ■ Input/Output range (÷4): 50-125MHz ■ Input/Output range (÷8): 25-62.5MHz • 150ps max output to output skew • Two bypass test mode options • • • • • Fully Integrated PLL 3.3V Operation Pin compatible with MPC9353 Industrial temp range: -40°C to +85°C 32-Lead TQFP Packaging FIGURE 1. BLOCK DIAGRAM OF THE XRK39653 VDD PECL PECL QFB Ref PLL FB_IN VDD FB Q0 0 0 Q1 0 1 ÷4 ÷2 1 1 PLL_EN Q2 Q3 Q4 VCO_SEL Q5 BYPASS Q6 Q7 OE Exar Corporation 48720 Kato Road, Fremont CA, 94538 • (510) 668-7000 • FAX (510) 668-7017 • www.exar.com xr PRELIMINARY XRK39653 3.3V, 8-OUTPUT ZERO DELAY BUFFER REV. P1.0.0 PRODUCT ORDERING INFORMATION PRODUCT NUMBER PACKAGE TYPE OPERATING TEMPERATURE RANGE XRK39653IQ 32-Lead TQFP -40°C to +85°C XRK39653IQ-F 32-Lead TQFP "Lead Free" -40°C to +85°C VCO_SEL BYPASS PLL_EN GND QFB VDD Q0 GND FIGURE 2. PIN OUT OF THE XRK39653 32 31 30 29 28 27 26 25 AVDD 1 24 Q1 FB_IN 2 23 VDD NC 3 22 Q2 NC 4 21 GND NC 5 20 Q3 NC 6 19 VDD AGND 7 18 Q4 PECL 8 17 GND 2 OE VDD Q7 13 14 15 16 Q5 12 VDD 11 Q6 10 GND 9 PECL XRK39653 xr PRELIMINARY REV. P1.0.0 XRK39653 3.3V, 8-OUTPUT ZERO DELAY BUFFER PIN DESCRIPTIONS NUMBER NAME TYPE DESCRIPTION 1 AVDD Power 2 FB_IN Input 3, 4, 5, 6 NC 7 AGND Power PLL ground 8 PECL Input LVPECL - pos differential reference clock 9 PECL Input LVPECL - neg differential reference clock 10 OE Input 11,15, 19, 23, 27, VDD Power Power supply 12, 14, 16, 18, 20, 22, 24, 26 Q[7:0] Output Clock outputs 13, 17, 21, 25, 29 GND Power Ground 28 QFB Output Feedback output for PLL 30 PLL_EN Input pull-up PLL enable/disable select 31 BYPASS Input pull-up PLL and output divider bypass select 32 VCO_SEL Input pull-up VCO divider select Power supply for PLL pull-up pull-down External PLL feedback clock input Output enable/disable and device reset TABLE 1: CONTROL INPUT FUNCTION TABLE Pin Name 0 1 Default VCO_SEL System Divide = 4 of VCO output System Divide = 8 of VCO output 1 PLL_EN PLL is bypassed and disabled. The PECL clock reference source drives the outputs through the divider blocks PLL enabled. Normal operation. VCO output drives the outputs through the divider blocks 1 BYPASS Complete bypass of the PLL and divider blocks. PECL reference clocks the outputs. Normal operation. Dividers selected. 1 OE Outputs enabled Outputs tri-stated and device reset. VCO running at minimum frequency 0 3 xr PRELIMINARY XRK39653 3.3V, 8-OUTPUT ZERO DELAY BUFFER REV. P1.0.0 DC C HARACTERISTICS (VCC= 3.3 + 5%, TA= -40°C TO +85°C) SYMBOL CHARACTERISTICS M IN TYP MAX UNIT CONDITION PECL Clock inputs common mode range 1.0 VDD-0.6 V LVPECL VPP PECL Clock peak-to-peak input voltage 300 1000 mV LVPECL VIH Input voltage high 2.0 VDD+0.3 V LVCMOS VIL Input voltage low 0.8 V LVCMOS VOH Output High Voltagea V IOH=-24mA VOL Output Low Voltagea V V IOL=24mA VCMRa ZOUT IIN ICC_PLL 2.4 0.55 0.30 Output Impedance Ω 14-17 Input leakage current Maximum PLL supply current 5.0 ICCQ Maximum Quiescent supply current VTT Output Termination Voltage IOL=12mA +200 μΑ VIN =V DD or VIN =GND 10.0 mA AVDD pin 10.0 mA All VDD pins, OE=1 VCC÷2 V a. VCMR is the cross point of the differential input signal. . AC C HARACTERISTICS (VCC= 3.3 + 5%, TA= -40°C TO +85°C) a SYMBOL fVCO fref PARAMETER MIN VCO Frequency TYP MAX UNIT 200 500 MHz CONDITION Input Reference Frequency ÷4 feedback ÷8 feedback PLL Bypass 50 25 0 125 62.5 200 MHz PLL locked PLL locked bypass mode fMAX Max Output Frequency ÷4 feedback ÷8 feedback 50 25 125 62.5 MHz PLL locked PLL locked VPP PECL Clock peak-to-peak input voltage 450 1000 mV LVPECL VCMR PECL input Common Mode range 1.2 VDD-0.75 V LVPECL tPW Min Input Reference Clock Minimum Pulse Width tSPO Propagation Delay - Static Phase Offset (PECL to FB_IN) tPD Propagation Delay - PLL Bypassed Bypass mode 1 (BYPASS = 0) Bypass mode 2, (BYPASS = 1, PLL_EN = 0) 2 ns -75 125 ps 1.2 3.0 3.3 7.0 ns ns tskew(O) Output-to-Output Skew 150 ps tskew(PP) Part to Part Skew (bypass PLL & divider) 1.5 ns tJIT(CC) Cycle-to-Cycle Jitter 100 ps 4 PLL locked BYPASS=0 xr PRELIMINARY REV. P1.0.0 XRK39653 3.3V, 8-OUTPUT ZERO DELAY BUFFER AC C HARACTERISTICS (VCC= 3.3 + 5%, TA= -40°C TO +85°C) a SYMBOL PARAMETER MIN TYP MAX UNIT tJIT(PER) Period Jitter 100 ps tJIT(I/O) I/O Phase Jitter (RMS) 25 ps 0.8 - 4 0.5 - 1.3 MHz MHz 55 % 10.0 ms 1000 ps BW PLL bandwidth DC Output duty cycle ÷4 feedback ÷8 feedback 45 50 tLOCK Maximum PLL Lock Time tor/tof Output Rise/Fall time tPLZ,HZ Output Disable Time 7 ns tPHZ,LZ Output Enable Time 6 ns 100 CONDITION PLL locked 0.55 to 2.4V a. AC characteristics apply for parallel output termination of 50Ω to VTT. MAXIMUM RATINGSa SYMBOL CHARACTERISTICS MIN M AX UNIT VDD Supply Voltage -0.3 3.9 V VIN DC Input Voltage -0.3 VDD+0.3 V DC Output Voltage -0.3 VDD+0.3 V DC Input Current +20 mA DC Output Current +50 mA 125 °C VOUT IIN IOUT TS Storage Temperature -65 CONDITION a. Absolute maximum continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. GENERAL SPECIFICATIONS SYMBOL CHARACTERISTICS MIN TYP VCC÷2 MAX UNIT VTT Output termination voltage MM ESD Protection (Machine model) 200 V HBM ESD Protection (Human body model) 2000 V LU Latch-up immunity 200 mA CIN Input Capacitance 4.0 5 CONDITION V pF Inputs xr PRELIMINARY XRK39653 3.3V, 8-OUTPUT ZERO DELAY BUFFER REV. P1.0.0 PACKAGE DIMENSIONS 32 LEAD THIN QUAD FLAT PACK (7 x 7 x 1.4 mm TQFP) rev. 2.00 D D1 24 17 16 25 D1 32 D 9 1 8 B e A2 C A α Seating Plane A1 L Note: The control dimension is the millimeter column INCHES MILLIMETERS SYMBOL MIN MAX MIN MAX A 0.055 0.063 1.40 1.60 A1 0.002 0.006 0.05 0.15 A2 0.053 0.057 1.35 1.45 B 0.012 0.018 0.30 0.45 C 0.004 0.008 0.09 0.20 D 0.346 0.362 8.80 9.20 D1 0.272 0.280 6.90 7.10 e 0.0315 BSC 0.80 BSC L 0.018 0.030 0.45 0.75 α 0° 7° 0° 7° 6 xr PRELIMINARY REV. P1.0.0 XRK39653 3.3V, 8-OUTPUT ZERO DELAY BUFFER REVISION HISTORY REVISION # P1.0.0 DATE DESCRIPTION February 2006 Initial release. NOTICE EXAR Corporation reserves the right to make changes to the products contained in this publication in order to improve design, performance or reliability. EXAR Corporation assumes no responsibility for the use of any circuits described herein, conveys no license under any patent or other right, and makes no representation that the circuits are free of patent infringement. Charts and schedules contained here in are only for illustration purposes and may vary depending upon a user’s specific application. While the information in this publication has been carefully checked; no responsibility, however, is assumed for inaccuracies. EXAR Corporation does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless EXAR Corporation receives, in writing, assurances to its satisfaction that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; (c) potential liability of EXAR Corporation is adequately protected under the circumstances. Copyright 2006 EXAR Corporation Datasheet February 2006. Reproduction, in part or whole, without the prior written consent of EXAR Corporation is prohibited. 7