Part Number: www.SunLED.com XZDMDK10A SURFACE MOUNT DISPLAY Features 0.4INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 800PCS / REEL. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise Absolute Maximum Ratings (TA=25°C)) MDK (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 mA Power Dissipation PT 75 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number XZDMDK10A Emitting Color Red Published Date : MAY 19, 2005 Operating Characteristics (TA=25°C)) mW Emitting Material InGaAlP °C Luminous Intensity (IF=10mA) ucd min. typ. 8000 25990 Drawing No : XDSA3008 MDK Unit (InGaAlP) Forward Voltage (typ.) (IF=10mA) VF 1.85 V Forward Voltage (max.) (IF=10mA) VF 2.5 V Reverse Current (VR=5V) IR 10 uA Wavelength of Peak Emission (IF=10mA) λP 650 nm Wavelength of Dominant Emission (IF=10mA) λD 635 nm Spectral Line Full Width At Half-Maximum (IF=10mA) ∆λ 28 nm Capacitance (VF=0V, f=1MHz) C 35 pF Wavelength nm λP Description 650 Common Anode, Rt. Hand Decimal V6 Checked : Shin Chi P.1/3 Part Number: www.SunLED.com XZDMDK10A SURFACE MOUNT DISPLAY MDK Published Date : MAY 19, 2005 Drawing No : XDSA3008 V6 Checked : Shin Chi P.2/3 Part Number: www.SunLED.com XZDMDK10A SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAY 19, 2005 Drawing No : XDSA3008 V6 Checked : Shin Chi P.3/3