447 447-426 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Direct Coupling - Split Shell 447 F D 426 NF 16 12 K P CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 2 DIRECT COUPLING Product Series Polysulfide (Omit for none) Connector Designator B = Band K = Precoiled Band (Omit for none) Angle and Profile D = Split 90 F = Split 45 Cable Range (Table V) Shell Size (Table I) Basic Part No. Finish (Table II) A Thread (Table I) J E (Table III) (Table IV) B Typ. (Table I) J G (Table III) (Table IV) F (Table IV) Split 45° Split 90° H (Table IV) .500 (12.7) Max Termination Area Free of Cadmium Knurl or Ridges Mfr's Option K* Cable Range L* * (Table V) Polysulfide Stripes P Option Band Option (K Option Shown See Note 3) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 447 - Page 14 447 447-426 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Direct Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Dash No. 10 12 14 16 18 20 22 24 28 32 K ±.030 .220 .310 .440 .560 .630 .750 .880 1.000 1.060 1.190 Elbow Size 10/12 14 16/18 20 22 24 28 32 TABLE IV: ELBOW DIMENSIONS E F G Max Max Max .500 (12.7) 1.870 (47.5) .750 (19.1) .560 (14.2) 1.940 (49.3) .810 (20.6) .680 (17.3) 2.070 (52.6) .930 (23.6) .750 (19.1) 2.130 (54.1) 1.000 (25.4) .820 (20.8) 2.190 (55.6) 1.060 (26.9) .880 (22.4) 2.250 (57.2) 1.120 (28.4) .940 (23.9) 3.100 (78.7) 1.180 (30.0) .990 (25.1) 2.400 (61.0) 1.340 (34.0) H Max 1.810 (46.0) 1.880 (47.8) 2.010 (51.1) 2.070 (52.6) 2.130 (54.1) 2.190 (55.6) 2.250 (57.2) 2.410 (61.2) TABLE V: CABLE RANGE Cable Range L Max Min ±(.8) Max .130 (3.3) .250 (6.4) (5.6) 1.000 (25.4) .250 (6.4) .380 (9.7) (7.9) 1.250 (31.8) .310 (7.9) .440 (11.2) (11.2) 1.340 (34.0) .375 (9.5) .630 (16.0) (14.2) 1.470 (37.3) .560 (14.2) .690 (17.5) (16.0) 1.560 (39.6) .630 (16.0) .750 (19.1) (19.1) 1.620 (41.1) .750 (19.1) .880 (22.4) (22.4) 1.750 (44.5) .880 (22.4) 1.000 (25.4) (25.4) 1.870 (47.5) (26.9) 1.970 (50.0) 1.000 (25.4) 1.130 (28.7) (30.2) 2.090 (53.1) 1.130 (28.7) 1.250 (31.8) 1. Metric dimensions (mm) are indicated in parentheses. 2. When using Connector Designator B refer to pages 18 and 19 for part number development. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 447 - Page 15