Z00607MA ® 0.8A TRIAC STANDARD Table 1: Main Features A2 Symbol Value Unit IT(RMS) 0.8 A VDRM/VRRM 600 V IGT (Q1) 5 mA G A1 DESCRIPTION The Z00607MA is suitable for low power AC switching applications, such as fan speed, small light controllers... Thanks to low gate triggering current, it can be directly driven by microcontrollers. A1 G A2 TO-92 Table 2: Order Codes Part Numbers Z00607MA 1BA2 Z00607MA 2BL2 Z00607MA 5BL2 Marking Z00607MA Z00607MA Z00607MA Table 3: Absolute Maximum Ratings Symbol IT(RMS) ITSM Parameter 0.8 Non repetitive surge peak on-state F = 50 Hz current (full cycle, Tj initial = 25°C) F = 60 Hz t = 20 ms 9 dI/dt Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns F = 120 Hz IGM Peak gate current tp = 20 µs Tstg Tj June 2005 A Tl = 50°C tp = 10 ms PG(AV) Unit RMS on-state current (full sine wave) I²t Value for fusing I²t Value Average gate power dissipation Storage junction temperature range Operating junction temperature range REV. 6 t = 16.7 ms 9.5 A 0.45 A²s Tj = 110°C 20 A/µs Tj = 110°C 1 A Tj = 110°C 0.1 W - 40 to + 150 - 40 to + 110 °C 1/6 Z00607MA Tables 4: Electrical Characteristics (Tj = 25°C, unless otherwise specified) Symbol IGT (1) Test Conditions Quadrant I - II - III IV VD = 12 V RL = 30 Ω VGT VGD VD = VDRM RL = 3.3 kΩ Tj = 110°C IH (2) IT = 200 mA IL IG = 1.2 IGT dV/dt (2) MAX. Unit mA ALL MAX. 1.3 V ALL MIN. 0.2 V MAX. 5 10 20 mA MIN. 10 V/µs MIN. 1.5 A/ms I - III - IV II MAX. VD = 67 %VDRM gate open Tj = 110°C (dI/dt)c (2) (dV/dt)c = 0.35 A/ms Value 5 7 Tj = 110°C mA Table 5: Static Characteristics Symbol VTM (2) Vto (2) Rd (2) IDRM IRRM Test Conditions tp = 380 µs Tj = 25°C ITM = 1.1 A Value Unit MAX. 1.5 V Threshold voltage Tj = 110°C MAX. 0.95 V Dynamic resistance Tj = 110°C MAX. 420 mΩ 5 µA 0.1 mA Tj = 25°C VDRM = VRRM = 600 V MAX. Tj = 110°C Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1. Table 6: Thermal resistances Symbol Rth(j-I) Rth(j-a) Parameter Value Unit Junction to lead (A.C.) 60 °C/W Junction to ambient 150 °C/W Figure 1: Maximum power dissipation versus RMS on-state current (full cycle) Figure 2: RMS on-state current versus ambient temperature (full cycle) P(W) IT(RMS)(A) 1.0 1.0 0.9 0.9 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 Rth(j-a) = Rth(j-l) 0.2 0.2 0.1 0.1 IT(RMS)(A) Tamb (°C) 0.0 0.0 0.0 2/6 Rth(j-a) = 150°C/W 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 10 20 30 40 50 60 70 80 90 100 110 Z00607MA Figure 3: Relative variation of thermal impedance versus pulse duration Figure 4: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) IGT, IH, IL [Tj] / IGT, IH, IL [Tj=25°C] K=[Zth(j-a)/Rth(j-a)] 2.5 1.00 2.0 IGT 1.5 0.10 IH & IL 1.0 0.5 Tj (°C) tp(s) 0.01 1E-3 0.0 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Figure 5: Surge peak on-state current versus number of cycles -40 -20 0 20 40 60 80 100 120 Figure 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms and corresponding value of I2t ITSM (A), I2t (A2s) ITSM (A) 10 200.0 100.0 9 Tj initial = 25°C t=20ms 8 dI/dt limitation: 20A/µs One cycle 7 ITSM Non repetitive Tj initial = 25°C 6 10.0 5 4 Repetitive Tamb = 25°C 3 1.0 I2t 2 1 tp (ms) Number of cycles 0 1 10 0.1 100 0.01 1000 Figure 7: On-state characteristics (maximum values) 0.10 1.00 10.00 Figure 8: Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values) ITM(A) (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 10.0 10.0 8.0 6.0 Tj = Tjmax. 1.0 4.0 Tj=max. Vt0=0.95 V Rd=420 mΩ Tj = 25°C 2.0 VTM (V) 0.0 0.5 1.0 1.5 2.0 2.5 (dV/dt)c (V/µs) 0.0 0.1 3.0 3.5 4.0 4.5 5.0 0.1 1.0 10.0 3/6 Z00607MA Figure 9: Relative variation of critical rate of decrease of main current versus junction temperature (dI/dt)c [Tj] / (dI/dt)c [Tj Specified] 6 5 4 3 2 1 Tj (°C) 0 0 10 20 30 40 50 60 70 80 90 100 110 Figure 10: Ordering Information Scheme Z 006 07 M A Blank 1BA2 Triac series Current 006 = 0.8A Sensitivity 07 = 5mA Voltage M = 600V Package A = TO-92 Packing mode 1BA2 = Bulk 2BL2 = Ammopack 5BL2 = Tape & reel Table 7: Product Selector 4/6 Part Number Voltage Sensitivity Type Package Z00607MA 600 V 5 mA Standard TO-92 Z00607MA Figure 11: TO-92 Package Mechanical Data DIMENSIONS REF. Min. A a B Millimeters A Typ. E D Typ. Max. 0.053 4.70 C F Min. 1.35 B C Max. Inches 0.185 2.54 0.100 D 4.40 0.173 E 12.70 0.500 F 3.70 0.146 a 0.50 0.019 Table 8: Ordering Information Ordering type Marking Z00607MA 1BA2 Z0607MA Z00607MA 2BL2 00607MA Z00607MA 5BL2 Z0607MA Package TO-92 Weight 0.2 g Base qty Delivery mode 2500 Bulk 2000 Ammopack 2000 Tape & reel Table 9: Revision History Date Revision Description of Changes Oct-2001 4 Last update. 25-Mar-2005 5 Package: TO-92 tape & reel delivery mode 5BL2 added. 21-Jun-2005 6 Markings updated from Z006xxxx to Z06xxxx 5/6 Z00607MA Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 6/6