ZFAMDK10A2 Part Number: www.SunLED.com SURFACE MOUNT DISPLAY Features z0.4 INCH CHARACTER HEIGHT. zLOW CURRENT OPERATION. zHIGH CONTRAST AND LIGHT OUTPUT. zCATEGORIZED FOR LUMINOUS INTENSITY. zMECHANICALLY zGRAY FACE, WHITE SEGMENT. zPACKAGE :250PCS / REEL. zMOISTURE zRoHS RUGGED. SENSITIVITY LEVEL : LEVEL 4. COMPLIANT. Notes: Operating Characteristics (TA=25°C) 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The gap between the reflector and PCB shall not exceed 0.25mm. Absolute Maximum Ratings (TA=25°C) MDK (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZFAMDK10A2 Emitting Color Red Published Date : MAR 11,2008 Emitting Material InGaAlP °C Unit Forward Voltage (Typ.) (IF=10mA) VF 1.85 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 650 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 635 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 28 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 35 pF Luminous Intensity (IF=10mA) ucd min. typ. 4700 22790 Drawing No : SDSA5419 MDK (InGaAlP) V2 Wavelength nm λP Description 650 Common Anode, Rt. Hand Decimal Checked : Shin Chi P.1/4 Part Number: www.SunLED.com ZFAMDK10A2 SURFACE MOUNT DISPLAY MDK Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 11,2008 Drawing No : SDSA5419 V2 Checked : Shin Chi P.2/4 Part Number: www.SunLED.com ZFAMDK10A2 SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : MAR 11,2008 Drawing No : SDSA5419 V2 Checked : Shin Chi P.3/4 Part Number: www.SunLED.com SURFACE MOUNT DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 11,2008 ZFAMDK10A2 ZFAMDK10A2 Drawing No : SDSA5419 V2 Checked : Shin Chi P.4/4