SUNLED ZFAUY10A2

Part Number:
www.SunLED.com
ZFAUY10A2
SURFACE MOUNT DISPLAY
Features
z0.4
INCH CHARACTER HEIGHT.
zLOW
CURRENT OPERATION.
zHIGH
CONTRAST AND LIGHT OUTPUT.
zCATEGORIZED
FOR LUMINOUS INTENSITY.
zMECHANICALLY
zGRAY
FACE, WHITE SEGMENT.
zPACKAGE
:250PCS / REEL.
zMOISTURE
zRoHS
RUGGED.
SENSITIVITY LEVEL : LEVEL 4.
COMPLIANT.
Notes:
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
4. The gap between the reflector and PCB shall not exceed 0.25mm.
Absolute Maximum Ratings
(TA=25°C)
2.5
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength Of Peak Emission (Typ.)
(IF=10mA)
λP
590
nm
Wavelength Of Dominant
Emission (Typ.)
(IF=10mA)
λD
588
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
Δλ
35
nm
Capacitance
(VF=0V, f=1MHz)
C
20
pF
Forward Current
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
140
mA
Power Dissipation
PT
75
mW
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Yellow
Published Date : MAR 13,2008
V
VF
V
ZFAUY10A2
1.95
Forward Voltage (Max.)
(IF=10mA)
5
Emitting
Color
VF
Unit
VR
Part
Number
Forward Voltage (Typ.)
(IF=10mA)
UY
(GaAsP/
GaP)
Reverse Voltage
Storage Temperature
UY
(GaAsP/ Unit
GaP)
Operating Characteristics
(TA=25°C)
1. All dimensions are in millimeters (inches).
Emitting
Material
GaAsP/GaP
°C
Luminous
Intensity
(IF=10mA)
ucd
min.
typ.
800
3390
Drawing No : SDSA5423
Wavelength
nm
λP
Description
590
Common Anode, Rt. Hand Decimal
V2
Checked : Shin Chi
P.1/4
Part Number:
www.SunLED.com
ZFAUY10A2
SURFACE MOUNT DISPLAY
™ UY
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 13,2008
Drawing No : SDSA5423
V2
Checked : Shin Chi
P.2/4
Part Number:
www.SunLED.com
ZFAUY10A2
SURFACE MOUNT DISPLAY
™ Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15)
™ Tape Specification (Units : mm)
Published Date : MAR 13,2008
Drawing No : SDSA5423
V2
Checked : Shin Chi
P.3/4
Part Number:
www.SunLED.com
SURFACE MOUNT DISPLAY
PACKING & LABEL SPECIFICATIONS
Published Date : MAR 13,2008
ZFAUY10A2
ZFAUY10A2
Drawing No : SDSA5423
V2
Checked : Shin Chi
P.4/4