Part Number: www.SunLED.com ZM2CR55W 3.2x1.6mm SMD CHIP LED LAMP PRELIMINARY SPEC Features z 3.2mmx1.6mm z LOW SMT LED, 1.1mm THICKNESS. POWER CONSUMPTION. z WIDE z IDEAL VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE z RoHS SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) M2CR (AlInGaP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Power Dissipation PT 84 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZM2CR55W Emitting Color Red Published Date : FEB 26 ,2008 Emitting Material AlInGaP Operating Characteristics (TA=25°C) °C Lens-color Water Clear Drawing No : SDSA6213 M2CR (AlInGaP) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.2 V Forward Voltage (Max.) (IF=20mA) VF 2.8 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 640 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 630 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 25 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 27 pF Luminous Intensity (IF=20mA) mcd min. typ. 650 995 V1 Wavelength nm λP Viewing Angle 2 θ 1/2 640 120° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZM2CR55W 3.2x1.6mm SMD CHIP LED LAMP M2CR Published Date : FEB 26 ,2008 Drawing No : SDSA6213 V1 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZM2CR55W 3.2x1.6mm SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 26 ,2008 Drawing No : SDSA6213 V1 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 3.2x1.6mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 26 ,2008 ZM2CR55W Drawing No : SDSA6213 ZM2CR55W V1 Checked : B.L.LIU P.4/4