ZMDKBBABGA56W Part Number: www.SunLED.com 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Features ●3.0mmx1.0mm RIGHT ANGLE SMT LED, 1.5mm THICKNESS. ●LOW POWER CONSUMPTION. ●WIDE VIEWING ANGLE. ●IDEAL FOR BACKLIGHT AND INDICATOR. ●PACKAGE : 2000PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 3. ●RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: Operating Characteristics (TA=25°C) 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) 3.2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 4.0 4.0 V Reverse Current (Max.) (VR=5V) IR 10 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λp 650 468 520 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 635 470 525 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 21 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 35 100 100 pF 5 V Forward Current IF 30 30 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 100 100 mA Power Dissipation PT 75 120 120 mW - 1000 1000 V Electrostatic Discharge Threshold (HBM) TA -40 ~ +85 Tstg -40 ~ +85 Emitting Color Emitting Material Red InGaAlP Blue InGaN Green InGaN Published Date : FEB 26,2008 3.2 Unit 5 ZMDKBBABGA56W 1.95 BGA (InGa N) 5 Part Number VF BBA (InGa N) VR Storage Temperature Forward Voltage (Typ.) (IF=20mA) MDK (InGa AlP) Reverse Voltage Operating Temperature BGA BBA MDK (InGaA (InGa (InGa Unit N) N) lP) °C Lens-color Water Clear Drawing No : SDSA5869 Luminous Intensity (IF=20mA) mcd Wavelength nm λP min. typ. 70 198 650 18 59 468 50 198 520 V2 Checked : B.L.LIU Viewing Angle 2 θ 1/2 120° P.1/6 Part Number: www.SunLED.com ZMDKBBABGA56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP MDK Published Date : FEB 26,2008 Drawing No : SDSA5869 V2 Checked : B.L.LIU P.2/6 Part Number: www.SunLED.com ZMDKBBABGA56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP BBA Published Date : FEB 26,2008 Drawing No : SDSA5869 V2 Checked : B.L.LIU P.3/6 Part Number: www.SunLED.com ZMDKBBABGA56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP BGA Published Date : FEB 26,2008 Drawing No : SDSA5869 V2 Checked : B.L.LIU P.4/6 Part Number: www.SunLED.com ZMDKBBABGA56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 26,2008 Drawing No : SDSA5869 V2 Checked : B.L.LIU P.5/6 Part Number: www.SunLED.com ZMDKBBABGA56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 26,2008 Drawing No : SDSA5869 ZMDKBBABGA56W V2 Checked : B.L.LIU P.6/6