ZRO1737B1LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Broadband Transmission • Fixed Wireless Access • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1737 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -117 Harmonic Suppression (2nd) -17 Tuning Voltage 1 Max Units 1738 MHz dBc/Hz -16 dBc 4 Vdc MHz/V 5 Tuning Sensitivity (avg.) 2 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output -2 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 0 MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 8 Supply Current (Icc) 25 Vdc 30 mA Additional Notes Phase Noise @ 1 kHz offset (1 Hz BW) -90 (typ) dBc/Hz Phase Noise @ 100 kHz offset (1 Hz BW) -138 (typ) dBc/Hz LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B ZRO1737B1LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1750 1745 1740 85 °C 25 °C 1735 1730 -40 °C 1725 1720 1715 0 0.5 1 1.5 2 2.5 3 3.5 4 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 3 2 1 0 0.030 MIN. CUTBACK FROM LIVE PADS -1 -2 -3 1722 1726 1729 1732 1735 1738 1741 1743 1745 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B