http://www.luguang.cn Email: [email protected] 1. SCOPE This specification shall cover the characteristics of the ceramic resonator with 1000KHz 2. SPECIFICATION NO. : 3. PART NO. : ZTB1.25M 4. ELECTRICAL SPECIFICATION 4.1 Oscillation Frequency (Fosc) : 1000±3KHz 4.2 Resonant Impedance(Ro) : 50Ω max. 4.3 Capacitance (Co) : 75PF±20% 4.4 Temperature Characteristics of Oscillation Frequency : ±0.3%max. (-20℃to+80℃) 4.5 Rated Voltage : 50 VDC max. 4.6 Maximum Input Voltage : 15 Vp-p 4.7 Insulation Resistance : 1000MΩ min. 5. Environmental Specification : 5.1 Lead Pull : 1KG load Terminal Direction Min. 5.2 Vibration : 600-3300rpm.1.5mm.x.y&.z axes.1H Each Min. 5.3 Shock : Random Drop,30cm High Concrete Floor 5.4 Solderability : Dipping Terminals Into Molten Solder at 230±5℃ At 5±0.5 Sec. 5.5 Resistance to Soldering Heat : Dipping Lead Terminals No Close Than 2mm From the Sn 350 ± 10℃ 3 Sec. After 1H to Test. 5.6 Heat Resistance : Keep In 40±2℃ Temp 90%Humidity For 100H After 1H To Test. 5.7 Operation Tempeature : -20℃to+80℃ 5.8 Storage Temperature : -40℃to+85℃ 5.9 Aging Rate :Fosc ±0.5%max. SHENZHEN LUGUANG ELECTRONIC TECHNOLOGY CO.,LTD. 1 http://www.luguang.cn Email: [email protected] 6. Dimensions (mm) W=5.1mm T=2.2mm H=6.3mm S=2.5mm L=4.0mm Mark : ZTB1.25M 7. Test circuit SHENZHEN LUGUANG ELECTRONIC TECHNOLOGY CO.,LTD. 2