ZUP-SERIES Zero-up CV/CC 200 ~ 800W 䡵 Model name ZUP 10-20 Output current (0 ~ 20A) Series Output voltage (0 ~ 10V) 䡵 Features 䢇 Programmable power supply Constant voltage/Constant current 䢇 Built-in RS232 & RS485 interface GP-IB interface: Option 䢇 External voltage or resistor programming 䢇 Last setting memory with safe restart or automatic restart modes 䢇 Input current harmonics: EN61000-3-2 Class A (Low Voltage Directive) 䡵 Specifications Input 1. Input voltage range 2. Input current harmonics 3. Power factor (typ) Output 1. Constant voltage 0.99 at 100VAC, 100% load Load Regulation: 0.005% +2mV, Line Regulation: 0.005% +1mV RMS ripple: 5mV (5Hz ~ 1MHz bandwidth) Ripple :50mV(pk to pk) (20MHz bandwidth) Load Regulation: 0.01% +5mA, Line Regulation: 0.01% +2mA Over voltage, Over temperature, Over current 0 ~ +50°C: 100% load By TTL signal or Dry contact By voltage (0 ~ 4V) or by Resistance (0 ~ 4kΩ) By voltage (0 ~ 4V) or by Resistance (0 ~ 4kΩ) Maximum 0.5V drop on each load wires RS232 and RS485 built-in, IEEE488 option System Power Supply 2. Constant current 3. Output protections Environment 1. Operating temperature External functions 1. Output ON/OFF 2. Output voltage programming 3. Output current programming 4. Remote sensing 5. Communication interface Approval 1. Safety standard 2. EMC standard 85 ~ 265VAC (47 ~ 63Hz) universal input voltage Complies with EN61000-3-2 Class A. UL3111-1, EN61010-1 EN61326-1, IEC61326-1 FCC part 15 class A 䡵 Product lineup Model name Output voltage Output current Output power Weight 0 ~ 33A 198W 2.9kg 0 ~ 66A 396W 3.2kg ZUP6-132 (*) 0 ~ 132A 792W 5.8kg ZUP10-20 0 ~ 20A 200W 2.9kg 3.2kg ZUP6-33 ZUP6 ZUP10 ZUP20 ZUP36 ZUP60 ZUP80 ZUP120 ZUP6-66 ZUP10-40 0 ~ 6VDC 0 ~ 40A 400W ZUP10-80 (*) 0 ~ 80A 800W 5.8kg ZUP20-10 0 ~ 10A 200W 2.9kg 3.2kg ZUP20-20 0 ~ 10VDC 0 ~ 20A 400W ZUP20-40 (*) 0 ~ 40A 800W 5.8kg ZUP36-6 0 ~ 6A 216W 2.9kg 3.2kg ZUP36-12 0 ~ 20VDC 0 ~ 12A 432W ZUP36-24 (*) 0 ~ 24A 864W 5.8kg ZUP60-3.5 0 ~ 3.5A 210W 2.9kg 3.2kg ZUP60-7 0 ~ 36VDC 0 ~ 7A 420W ZUP60-14 (*) 0 ~ 14A 840W 5.8kg ZUP80-2.5 0 ~ 2.5A 200W 2.9kg ZUP80-5 ZUP120-1.8 ZUP120-3.6 (*) Contact us about delivery before ordering. 0 ~ 60VDC 0 ~ 80VDC 0 ~ 120VDC 0 ~ 5A 400W 3.2kg 0 ~ 1.8A 216W 2.9kg 0 ~ 3.6A 432W 3.2kg 193 ZUP-SERIES Zero-up CV/CC 200 ~ 800W 䡵 Front panel 䡵 Outline drawing System Power Supply (Unit: mm) Notes: 1. Mounting screws must not protrude into the power supply more than 6mm. 2. External control connector Connector: AMP, P/N 102617-5 Receptacle: AMP, P/N 87631-9 Receptacle contacts: AMP, P/N 87523-5(strip form) P/N 87523-6(loose piece) 2. Wire AWG: 24 to 20 Hand tool for wires connection: AMP, P/N: 90202-2 194 3. RS232/RS485 communication EIA/EIA-568A, shielded, 8 contacts connectors 4. Model name and output rating are shown here according to the specifications. 5. M6 or M4 screws for load wires connection. 6. Input voltage and current rating are shown here according to the specifications. ZUP-SERIES Zero-up CV/CC 200 ~ 800W System Power Supply 195