A Product Line of Diodes Incorporated ZXTC6718MC COMPLEMENTARY DUAL 20V LOW SATURATION TRANSISTORS Features and Benefits Mechanical Data NPN Transistor • BVCEO > 20V • IC = 4.5A Continuous Collector Current • Low Saturation Voltage (150mV max @ 1A) • RSAT = 47mΩ for a low equivalent On-Resistance PNP Transistor • BVCEO > -20V • IC = -3.5A Continuous Collector Current • Low Saturation Voltage (-220mV max @ -1A) • RSAT = 64mΩ for a low equivalent On-Resistance • hFE characterized up to 6A for high current gain hold up • Low profile 0.8mm high package for thin applications • RθJA efficient, 40% lower than SOT26 2 • 6mm footprint, 50% smaller than TSOP6 and SOT26 • Lead-Free, RoHS Compliant (Note 1) • Halogen and Antimony Free. “Green” Device (Note 2) • Qualified to AEC-Q101 Standards for High Reliability • • • • • • • Case: DFN3020B-8 Case material: Molded Plastic. “Green” Molding Compound. Terminals: Pre-Plated NiPdAu leadframe. Nominal package height: 0.8mm UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Weight: 0.013 grams (approximate) Applications • • • • • • DC – DC Converters Charging circuits Power switches Motor control LED Backlighting circuits Portable applications C1 C2 DFN3020B-8 C2 B1 B2 E2 Bottom View C1 C1 C1 C2 E1 Top View C2 B2 E1 B1 E2 NPN Transistor PNP Transistor Pin 1 Bottom View Pin-Out Equivalent Circuit Ordering Information Product ZXTC6718MCTA Notes: Marking DB2 Reel size (inches) 7 Tape width (mm) 8 Quantity per reel 3000 1. No purposefully added lead. 2. Diodes Inc’s “Green” Policy can be found on our website at http://www.diodes.com Marking Information DB2 ZXTC6718MC Document number: DS31927 Rev. 3 - 2 DB2 = Product type marking code Top view, dot denotes pin 1 1 of 9 www.diodes.com December 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTC6718MC Maximum Ratings @ TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Peak Pulse Current Continuous Collector Current Continuous Collector Current Base Current Symbol VCBO VCEO VEBO ICM (Notes 3 & 6) (Notes 4 & 6) IC NPN 40 20 7 12 4.5 5 PNP -25 -20 -7 -6 -3.5 -3.8 1 IB Unit V V V A A A Thermal Characteristics @ TA = 25°C unless otherwise specified Characteristic Symbol (Notes 3 & 6) Power Dissipation Linear Derating Factor (Notes 4 & 6) PD (Notes 5 & 6) (Notes 5 & 7) Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Operating and Storage Temperature Range Notes: (Notes 3 & 6) (Notes 4 & 6) (Notes 5 & 6) (Notes 5 & 7) (Notes 6 & 8) RθJA RθJL TJ, TSTG NPN PNP 1.5 12 2.45 19.6 1.13 8 1.7 13.6 83.3 51.0 111 73.5 17.1 -55 to +150 Unit W mW/°C °C/W °C 3. For a dual device surface mounted on 28mm x 28mm (8cm2) FR4 PCB with high coverage of single sided 2 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. The heatsink is split in half with the exposed collector pads connected to each half. 4. Same as note (3), except the device is measured at t <5 sec. 5. Same as note (3), except the device is surface mounted on 31mm x 31mm (10cm2) FR4 PCB with high coverage of single sided 1oz copper. 6. For a dual device with one active die. 7. For dual device with 2 active die running at equal power. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). ZXTC6718MC Document number: DS31927 Rev. 3 - 2 2 of 9 www.diodes.com December 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTC6718MC Thermal Characteristics -IC Collector Current (A) IC Collector Current (A) 10 10 VCE(SAT) Limited DC 1 1s 100ms 10ms 1ms 0.1 8sqcm 2oz Cu One active die Single Pulse, Tamb=25°C 0.01 0.1 100us 1 VCE(SAT) Limited DC 1 1s 100ms 10ms 0.1 0.01 0.1 10 1ms 100us 8sqcm 2oz Cu One active die Single Pulse, Tamb=25°C 1 10 -VCE Collector-Emitter Voltage (V) VCE Collector-Emitter Voltage (V) NPN Safe Operating Area PNP Safe Operating Area 8sqcm 2oz Cu One active die 60 D=0.5 40 20 Single Pulse D=0.2 D=0.05 D=0.1 0 100µ 1m 10m 100m 1 10 100 1k Max Power Dissipation (W) Thermal Resistance (°C/W) 2.0 80 10sqcm 1oz Cu Two active die 1.5 8sqcm 2oz Cu One active die 10sqcm 1oz Cu One active die 1.0 0.5 0.0 0 Transient Thermal Impedance 75 100 125 150 225 2oz Cu Two active die Tamb=25°C Tj max=150°C Thermal Resistance (°C/W) PD Dissipation (W) 2.5 50 Derating Curve 3.5 3.0 25 Temperature (°C) Pulse Width (s) Continuous 2.0 2oz Cu One active die 1.5 1.0 1oz Cu One active die 0.5 0.0 100m 1 1oz Cu Two active die 10 200 125 100 75 50 2oz Cu Once active die 2oz Cu Two active die 25 0 0.1 100 1 10 100 Board Cu Area (sqcm) Power Dissipation v Board Area Document number: DS31927 Rev. 3 - 2 1oz Cu Two active die 150 Board Cu Area (sqcm) ZXTC6718MC 1oz Cu One active die 175 Thermal Resistance v Board Area 3 of 9 www.diodes.com December 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTC6718MC NPN - Electrical Characteristics @ TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector Emitter Cutoff Current Static Forward Current Transfer Ratio (Note 9) Symbol BVCBO BVCEO BVEBO ICBO IEBO ICES Min 40 20 7 - Typ 100 27 8.2 - Max 100 100 100 Unit V V V nA nA nA hFE 200 300 200 100 400 450 360 180 - - 15 150 135 250 300 mV Collector-Emitter Saturation Voltage (Note 9) VCE(sat) - 8 90 115 190 210 Base-Emitter Turn-On Voltage (Note 9) Base-Emitter Saturation Voltage (Note 9) Output Capacitance VBE(on) VBE(sat) Cobo - 0.88 0.98 23 0.97 1.07 30 V V pF Transition Frequency fT 100 140 - MHz Turn-on Time Turn-off Time ton toff - 170 400 - ns ns Notes: Test Condition IC = 100µA IC = 10mA IE = 100µA VCB = 30V VEB = 6V VCE = 16V IC = 10mA, VCE = 2V IC = 200mA, VCE = 2V IC = 2A, VCE = 2V IC = 6A, VCE = 2V IC = 0.1A, IB = 10mA IC = 1A, IB = 10mA IC = 2A, IB = 50mA IC = 3A, IB = 100mA IC = 4.5A, IB = 125mA IC = 4.5A, VCE = 2V IC = 4.5A, IB = 125mA VCB = 10V, f = 1MHz VCE = 10V, IC = 50mA, f = 100MHz VCC = 10V, IC = 3A IB1 = IB2 = 10mA 9. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%. ZXTC6718MC Document number: DS31927 Rev. 3 - 2 4 of 9 www.diodes.com December 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTC6718MC NPN - Typical Electrical Characteristics 0.25 IC/IB=50 Tamb=25°C 0.20 100°C VCE(SAT) (V) VCE(SAT) (V) 100m IC/IB=100 10m IC/IB=50 IC/IB=10 1m 1m 10m 100m 1 0.15 25°C 0.10 -55°C 0.05 0.00 1m 10 IC Collector Current (A) 10m 100m 1 10 IC Collector Current (A) VCE(SAT) v IC VCE(SAT) v IC 630 1.0 100°C 0.8 450 360 25°C 0.6 270 -55°C 0.4 180 0.2 0.0 1m 90 10m 100m 1 10 1.0 540 0 VBE(SAT) (V) Normalised Gain 1.2 Typical Gain (hFE) VCE=2V 0.8 -55°C 100°C 0.4 1m 10m 100m 1 10 IC Collector Current (A) hFE v IC VBE(ON) (V) 25°C 0.6 IC Collector Current (A) 1.0 IC/IB=50 VBE(SAT) v IC VCE=2V 0.8 -55°C 0.6 25°C 100°C 0.4 1m 10m 100m 1 10 IC Collector Current (A) VBE(ON) v IC ZXTC6718MC Document number: DS31927 Rev. 3 - 2 5 of 9 www.diodes.com December 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTC6718MC PNP - Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 10) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector Emitter Cutoff Current Symbol BVCBO BVCEO BVEBO ICBO IEBO ICES Min -25 -20 -7 - Typ -35 -25 -8.5 - Max -100 -100 -100 Unit V V V nA nA nA Static Forward Current Transfer Ratio (Note 10) hFE 300 300 150 15 475 450 230 30 - - Collector-Emitter Saturation Voltage (Note 10) VCE(sat) - -19 -170 -190 -240 -225 -30 -220 -250 -350 -300 mV Base-Emitter Turn-On Voltage (Note 10) Base-Emitter Saturation Voltage (Note 10) Output Capacitance VBE(on) VBE(sat) Cobo - -0.87 -1.01 21 -0.95 -1.12 30 V V pF Transition Frequency fT 150 180 - MHz Turn-on Time Turn-off Time ton toff - 40 670 - ns ns Notes: Test Condition IC = -100µA IC = -10mA IE = -100µA VCB = -20V VEB = -6V VCES = -16V IC = -10mA, VCE = -2V IC = -100mA, VCE = -2V IC = -2A, VCE = -2V IC = -6A, VCE = -2V IC = -0.1A, IB = -10mA IC = -1A, IB = -20mA IC = -1.5A, IB = -50mA IC = -2.5A, IB = -150mA IC = -3.5A, IB = -350mA IC = -3.5A, VCE = -2V IC = -3.5A, IB = -350mA VCB = -10V. f = 1MHz VCE = -10V, IC = -50mA, f = 100MHz VCC = -10V, IC = -1A IB1 = IB2 = -10mA 10. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%. ZXTC6718MC Document number: DS31927 Rev. 3 - 2 6 of 9 www.diodes.com December 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTC6718MC PNP - Typical Electrical Characteristics 1 0.25 IC/IB=50 Tamb=25°C VCE(SAT) (V) VCE(SAT) (V) 0.20 100m IC/IB=100 IC/IB=50 10m IC/IB=10 1m 10m 100m 1 25°C 0.10 -55°C 0.05 0.00 1m 10 IC Collector Current (A) 100°C 0.15 10m 630 540 1.0 450 25°C 360 0.6 270 0.4 180 -55°C 0.2 0.0 1m 90 10m 100m 1.0 0 10 1 VBE(SAT) (V) Normalised Gain VCE=2V 100°C Typical Gain (hFE) 1.4 0.8 10 1 10 IC/IB=50 0.8 -55°C 0.6 25°C 100°C 0.4 1m IC Collector Current (A) hFE v IC 1.0 1 VCE(SAT) v IC VCE(SAT) v IC 1.2 100m IC Collector Current (A) 10m 100m IC Collector Current (A) VBE(SAT) v IC VCE=2V VBE(ON) (V) 0.8 -55°C 0.6 25°C 0.4 0.2 1m 100°C 10m 100m 1 IC Collector Current (A) 10 VBE(ON) v IC ZXTC6718MC Document number: DS31927 Rev. 3 - 2 7 of 9 www.diodes.com December 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTC6718MC Package Outline Dimensions A DFN3020B-8 Dim Min Max Typ A 0.77 0.83 0.80 A1 0 0.05 0.02 A3 0.15 b 0.25 0.35 0.30 D 2.95 3.075 3.00 D2 0.82 1.02 0.92 D4 1.01 1.21 1.11 e 0.65 E 1.95 2.075 2.00 E2 0.43 0.63 0.53 L 0.25 0.35 0.30 Z 0.375 All Dimensions in mm A3 A1 D D4 D4 D2 E E2 b Z e L Suggested Pad Layout C X Y1 G1 G Y2 Y X1 ZXTC6718MC Document number: DS31927 Rev. 3 - 2 Dimensions C G G1 X X1 Y Y1 Y2 8 of 9 www.diodes.com Value (in mm) 0.650 0.285 0.090 0.400 1.120 0.730 0.500 0.365 December 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTC6718MC IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. B. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devicesor systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com ZXTC6718MC Document number: DS31927 Rev. 3 - 2 9 of 9 www.diodes.com December 2010 © Diodes Incorporated