54ACTQ16240 16-Bit Inverting Buffer/Line Driver with TRI-STATE ® Outputs General Description Features The ’ACTQ16240 contains sixteen inverting buffers with TRI-STATE outputs designed to be employed as a memory and address driver, clock driver, or bus-oriented transmitter/ receiver. The device is nibble controlled. Each nibble has separate TRI-STATE control inputs which can be shorted together for full 16-bit operation. The ’ACTQ16240 utilizes NSC Quiet Series technology to guarantee quiet output switching and improve dynamic threshold performance. FACT Quiet Series™ features GTO™ output control for superior performance. n Utilizes NSC FACT Quiet Series technology n Guaranteed simultaneous switching noise level and dynamic threshold performance n Separate control logic for each byte n 16-bit version of the ’ACTQ240 n Outputs source/sink 24 mA n Standard Microcircuit Drawing (SMD) 5962-9688001 Logic Symbol Connection Diagram Pin Assignment for CERPAK DS010924-1 Pin Description Pin Description Names OEn Output Enable Inputs (Active Low) I0–I15 Inputs O0–O15 Outputs DS010924-2 FACT ® is a trademark of National Semiconductor Corporation. FACT Quiet Series ® is a trademark of National Semiconductor Corporation. GTO ® is a trademark of National Semiconductor Corporation. TRI-STATE ® is a registered trademark of National Semiconductor Corporation. © 1998 National Semiconductor Corporation DS010924 www.national.com 54ACTQ16240 16-Bit Inverting Buffer/Line Driver with TRI-STATE Outputs September 1998 are controlled by an Output Enable (OEn) input for each nibble. When OEn is LOW, the outputs are in 2-state mode. When OEn is HIGH, the outputs are in the high impedance mode, but this does not interfere with entering new data into the inputs. Functional Description The ’ACTQ16240 contains sixteen inverting buffers with TRI-STATE standard outputs. The device is nibble (4 bits) controlled with each nibble functioning identically, but independent of the other. The control pins may be shorted together to obtain full 16-bit operation. The TRI-STATE outputs Logic Diagram DS010924-3 Truth Tables Inputs Inputs Outputs Outputs OE3 I8–I11 O8–O11 H OE1 I0–I3 O0–O3 L L L L H L H L L H L H X Z H X Z I12–I15 O12–O15 H Inputs Inputs Outputs OE4 Outputs OE2 I4–I7 O4–O7 L L L L H L H L L H L H X Z H X Z H = High Voltage Level L = Low Voltage Level X = Immaterial Z = High Impedance www.national.com 2 Absolute Maximum Ratings (Note 1) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source/Sink Current (IO) DC VCC or Ground Current per Output Pin Junction Temperature CDIP Storage Temperature Supply Voltage (VCC) ’ACTQ Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54ACTQ Minimum Input Edge Rate (dV/dt) ’ACTQ Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V −0.5V to +7.0V −20 mA +20 mA −20 mA +20 mA −0.5V to VCC + 0.5V ± 50 mA 4.5V to 5.5V 0V to VCC 0V to VCC −55˚C to +125˚C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT™ circuits outside databook specifications. ± 50 mA +175˚C −65˚C to +150˚C DC Electrical Characteristics for ’ACTQ Family Devices Symbol Parameter 54ACTQ TA = VCC (V) Units Conditions −55˚C to +125˚C Guaranteed Limits VIH VIL VOH Minimum High 4.5 2.0 Input Voltage 5.5 2.0 Maximum Low 4.5 0.8 Input Voltage 5.5 0.8 Minimum High 4.5 4.4 Output Voltage 5.5 5.4 V VOUT = 0.1V V or VCC − 0.1V VOUT = 0.1V V or VCC − 0.1V IOUT = −50 µA (Note 2) VIN = VIL or VIH VOL 4.5 3.70 5.5 4.70 Maximum Low 4.5 0.1 Output Voltage 5.5 0.1 V IOH= −24 mA V IOH= −24 mA IOUT = 50 µA (Note 2) VIN = VIL or VIH IOZ Maximum TRI-STATE 4.5 0.50 5.5 0.50 V IOL = 24 mA ± 10.0 µA IOL = 24 mA VI = VIL, VIH 5.5 5.5 ± 1.0 µA VO = VCC, GND VI = VCC, GND Leakage Current IIN Maximum Input Leakage Current ICCT Maximum ICC/Input 5.5 1.6 mA ICC Max Quiescent 5.5 160.0 µA VI = VCC − 2.1V VIN = VCC 50 mA or GND (Note 6) VOLD = 1.65V Max 50 mA VOHD = 3.85V Min Supply Current IOLD IOHD Minimum Dynamic Output Current (Note 3) 5.5 3 www.national.com DC Electrical Characteristics for ’ACTQ Family Devices Symbol Parameter 54ACTQ TA = VCC (V) (Continued) Units Conditions −55˚C to +125˚C Guaranteed Limits VOLP Quiet Output 5.0 1.2 V Maximum Dynamic VOL VOLV Quiet Output (Notes 4, 5) 5.0 -1.2 V Minimum Dynamic VOL (Notes 4, 5) Note 2: All outputs loaded; thresholds associated with output under test. Note 3: Maximum test duration 2.0 ms; one output loaded at a time. Note 4: Maximum number of outputs that can switch simultaneously is n. (n − 1) outputs are switched LOW and one output held LOW. Note 5: Maximum number of outputs that can switch simultaneously is n. (n − 1) outputs are switched HIGH and one output held HIGH. Note 6: ICC for 54ACTQ @ 25˚C is identical to 74ACTQ @ 25˚C. AC Electrical Characteristics Symbol Parameter VCC (V) (Note 7) 54ACTQ TA = −55˚C to +125˚C CL = 50 pF Min tPLH, Propagation Delay tPHL Data to Output tPZH, Output Enable Time 5.0 5.0 tPZL tPHZ, Output Disable Time 5.0 tPLZ 9.0 2.5 8.0 2.5 8.5 2.5 8.9 2.0 8.3 2.0 8.3 Capacitance Typ Units CIN Input Pin Capacitance 4.5 pF CPD Power Dissipation Capacitance 95 pF www.national.com Parameter 4 Max 2.5 Note 7: Voltage Range 5.0 is 5.0V ± 0.5V. Symbol Units Conditions VCC = 5.0V VCC = 5.0V ns ns ns 5 54ACTQ16240 16-Bit Inverting Buffer/Line Driver with TRI-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted 48-Lead CERPAK (F) NS Package Number WA48A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: [email protected] www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: [email protected] National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.