54ACTQ16540 16-Bit Inverting Buffer/Line Driver with TRI-STATE ® Outputs General Description Features The ’ACTQ16540 contains sixteen inverting buffers with TRI-STATE outputs designed to be employed as a memory and address driver, clock driver, or bus-oriented transmitter/ receiver. The device is byte controlled. Each byte has separate TRI-STATE control inputs which can be shorted together for full 16-bit operation. The ’ACTQ16540 utilizes NSC Quiet Series technology to guarantee quiet output switching and improved dynamic threshold performance. FACT Quiet Series ® features GTO ® output control for superior performance. n Utilizes NSC FACT Quiet Series technology n Guaranteed simultaneous switching noise level and dynamic threshold performance n Separate control logic for each byte n 16-bit version of the ’ACTQ540 n Outputs source/sink 24 mA n Additional specs for multiple output switching Logic Symbol Connection Diagram Pin Assignment for CERPAK DS010927-1 Pin Description Pin Description Names OEn Output Enable Input (Active Low) I0–I15 Inputs O0–O15 Outputs DS010927-2 GTO™ is a trademark of National Semiconductor Corporation. TRI-STATE ® is a registered trademark of National Semiconductor Corporation. FACT™ and FACT Quiet Series™ are trademarks of Fairchild Semiconductor Corporation. © 1998 National Semiconductor Corporation DS010927 www.national.com 54ACTQ16540 16-Bit Inverting Buffer/Line Driver with TRI-STATE Outputs September 1998 16-bit operation. The TRI-STATE outputs are controlled by an Output Enable (OEn) input for each byte. When OEn is LOW, the outputs are in 2-state mode. When OEn is HIGH, the outputs are in the high impedance mode, but this does not interfere with entering new data into the inputs. Functional Description The ’ACTQ16540 contains sixteen inverting buffers with TRI-STATE standard outputs. The device is byte controlled with each byte functioning identically, but independent of the other. The control pins may be shorted together to obtain full Logic Diagram DS010927-3 Truth Table Inputs Outputs OE1 OE2 I0–I7 L L H L H X X Z X H X Z L L L H OE3 OE4 I8–I15 L L H L H X X Z X H X Z L L L H Inputs Outputs H = High Voltage Level L = Low Voltage Level X = Immaterial Z = High Impedance www.national.com O0–O7 2 O8–O15 Absolute Maximum Ratings (Note 1) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source/Sink Current (IO) DC VCC or Ground Current per Output Pin Junction Temperature CDIP Storage Temperature Supply Voltage (VCC) ’ACTQ Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA): 54ACTQ Minimum Input Edge Rate (dV/dt) ’ACTQ Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V −0.5V to +7.0V −20 mA +20 mA −20 mA +20 mA −0.5V to VCC + 0.5V ± 50 mA 4.5V to 5.5V 0V to VCC 0V to VCC −55˚C to +125˚C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT™ circuits outside databook specifications. ± 50 mA +175˚C −65˚C to +150˚C DC Electrical Characteristics for ’ACTQ Family Devices Symbol Parameter 54ACTQ TA = −55˚C VCC (V) Units Conditions to +125˚C Guaranteed Limits VIH VIL VOH VOL IOZ Minimum High 4.5 2.0 Input Voltage 5.5 2.0 Maximum Low 4.5 0.8 Input Voltage 5.5 0.8 Minimum High 4.5 4.4 Output Voltage 5.5 5.4 4.5 3.70 5.5 4.70 Maximum Low 4.5 0.1 Output Voltage 5.5 0.1 Maximum 4.5 0.50 5.5 0.50 5.5 ± 10.0 V VOUT = 0.1V V or VCC − 0.1V VOUT = 0.1V V or VCC − 0.1V IOUT = −50 µA V (Note 2) VIN = VIL or VIH IOH = −24 mA V IOH = −24 mA IOUT = 50 µA V (Note 2) VIN = VIL or VIH IOL = 24 mA µA IOL = 24 mA VI = VIL, VIH VO = VCC, GND TRI-STATE Leakage Current 5.5 ± 1.0 µA VI = VCC, GND 5.5 1.6 mA VI = VCC − 2.1V VIN = VCC Supply Current 5.5 160.0 µA or GND IOLD Minimum Dynamic 5.5 50 mA IOHD Output Current (Note 3) -50 mA VOLD = 1.65V Max VOHD = 3.85V Min IIN Maximum Input Leakage Current ICCT Maximum ICC/Input ICC Max Quiescent 3 www.national.com DC Electrical Characteristics for ’ACTQ Family Devices Symbol Parameter 54ACTQ TA = −55˚C VCC (V) (Continued) Units Conditions to +125˚C Guaranteed Limits VOLP Quiet Output 5.0 0.8 V Maximum Dynamic VOL Quiet Output VOLV (Note 4) 5.0 -0.8 V Minimum Dynamic VOL (Note 4) Note 2: All outputs loaded; thresholds associated with output under test. Note 3: Maximum test duration 2.0 ms; one output loaded at a time. Note 4: Maximum number of outputs that can switch simultaneously is n. (n − 1) outputs are switched HIGH and one output held HIGH. AC Electrical Characteristics Symbol Parameter VCC (V) (Note 5) tPLH, Propagation Delay 5.0 tPHL Data to Output tPZH, Output Enable tPZL Time tPHZ, Output Disable tPLZ Time 54ACTQ TA = −55˚C to +125˚C CL = 50 pF 5.0 5.0 Min Max 3.0 9.0 3.0 9.5 3.0 10.0 3.0 11.0 2.5 10.5 2.5 10.5 Note 5: Voltage Range 5.0 is 5.0V ± 0.5V. Capacitance Symbol Typ Units CIN Input Pin Capacitance Parameter 4.5 pF CPD Power Dissipation 30 pF www.national.com 4 Units Conditions VCC = 5.0V VCC = 5.0V ns ns ns inches (millimeters) unless otherwise noted 48-Lead CERPAK (F) NS Package Number WA48A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: [email protected] www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: [email protected] National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. 54ACTQ16540 16-Bit Inverting Buffer/Line Driver with TRI-STATE Outputs Physical Dimensions