MILITARY DATA SHEET Original Creation Date: 05/10/96 Last Update Date: 07/30/96 Last Major Revision Date: 05/10/96 MN54F821-X REV 1A0 10-BIT D-TYPE FLIP-FLOP General Description The F821 is a 10-bit D-type flip-flop with TRI-STATE true outputs arranged in a broadside pinout. The F821 is functionally and pin compatible with the AMDs AM29821. Industry Part Number NS Part Numbers 54F821 54F821DMQB 54F821FMQB 54F821LMQB Prime Die M821 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F821-X REV 1A0 Features - TRI-STATE Outputs Direct replacement for AMD's Am29821 2 MILITARY DATA SHEET MN54F821-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) Note 1: Note 2: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F821-X REV 1A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input HIGH Current VCC=5.5V, VM=7.0V 1, 3 INPUTS 100 uA 1, 2, 3 IIL Input LOW Current VCC=5.5V, VM=0.5V 1, 3 INPUTS -0.6 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIH=0.8V, IOL=20mA, VIH=2.0V 1, 3 OUTPUTS 0.5 V 1, 2, 3 VOH Output HIGH Voltage VCC=4.5V, VIH=2.0V, IOH=-1.0mA, VIL=0.8V 1, 3 OUTPUTS 2.5 V 1, 2, 3 VOH3 Output HIGH Voltage VCC=4.5V, VIH=2.0V, IOH=-3.0mA, VIL=0.8V 1, 3 OUTPUTS 2.4 V 1, 2, 3 IOS Short-Circuit Current VCC=5.5V, VM=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA 1, 3 INPUTS -1.2 V 1, 2, 3 ICCZ Power Supply Current VCC=5.5V 1, 3 VCC 100 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VM=5.5V, VINL=0.0V, VINH=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 IOZH Output Leakage Current VCC=5.5V, VM=2.7V, VIH=2.0V 1, 3 OUTPUTS 50 uA 1, 2, 3 IOZL Output Leakage Current VCC=5.5V, VM=0.5V, VIH=2.0V 1, 3 OUTPUTS -50 uA 1, 2, 3 4 MILITARY DATA SHEET MN54F821-X REV 1A0 Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL-50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpLH tpHL tpZH tpZL tpHZ tpLZ ts(H/L) PARAMETER Propagation Delay Propagation Delay Output Enable Time Output Enable Time Output Disable Time Output Disable Time Setup Time or LOW th(H/L) Hold Time or LOW tw(H/L) Pulse Width HIGH Fmax HIGH Maximum CLock Frequency Note 1: Note 2: Note 3: Note 4: Note 5: CONDITIONS NOTES VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C PINNAME MIN MAX UNIT SUBGROUPS 2, 4 CP to Qn 2.0 9.5 ns 9 2, 4 CP to Qn 2.0 10.5 ns 10, 11 2, 4 CP to Qn 2.0 9.5 ns 9 2, 4 CP to Qn 2.0 10.5 ns 10, 11 2, 4 OUTPUT ENABLE 2.0 10.5 ns 9 2, 4 OUTPUT ENABLE 2.0 13.0 ns 10, 11 2, 4 OUTPUT ENABLE 2.0 10.5 ns 9 2, 4 OUTPUT ENABLE 2.0 13.0 ns 10, 11 2, 4 OUTPUT 1.5 DISABLE 7.0 ns 9 2, 4 OUTPUT 1.0 DISABLE 7.5 ns 10, 11 2, 4 OUTPUT 1.5 DISABLE 7.0 ns 9 2, 4 OUTPUT 1.0 DISABLE 7.5 ns 10, 11 5 Dn to CP 3.0 ns 9 5 Dn to CP 4.0 ns 10, 11 VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C 5 Dn to CP 2.5 ns 9, 10, 11 VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C TR/TF=1.0ns 5 CP 5.0 ns 9 5 CP 6.0 ns 10, 11 5 100 MHz 9 5 60 MHz 10, 11 VCC=5.0V @ 25C, VCC=4.5V & 5.5V @ -55/125C TR/TF=1.0ns Screen tested 100% on each device at -55 C, +25 C & +125 C temperature, Subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25 C temperature only, Subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, +125 C & -55 C temp., Subgroups A1, 2, 3, 7 & 8. Sample Tested (Method 5005, Table 1) on each MFG. lot at +25 C Subgroup A9, & periodically at +125 C & -55 C temp., Subgroups 10 & 11. Not tested at +25 C, +125 C or -55 C temperature (DESIGN CHARACTERIZATION DATA). 5