66012 Mii FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT CURRENT, 6N140 OPTOCOUPLER Features: Applications: • • • • • • • • • DSCC Approved 8302401EX High current transfer ratio: 1000% typical 1500 Vdc isolation test voltage Low input current requirement: 0.5mA OPTOELECTRONIC PRODUCTS DIVISION Military and Space High reliability systems Voltage Level Shifting Isolated Receiver Input Communication systems DESCRIPTION The 66012 optocoupler contains four infrared LEDs optically coupled to four corresponding high gain photon detectors. This unique quad optocoupler provides high CTR and low leakage currents over the full military temperature range (-55° to +125°C). The 66012 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534 screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Storage Temperature........................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range ............................................................................................................. -55°C to +125°C Lead Solder Temperature.........................................................................................260°C for 10s (1.6mm below seating plane) Peak Forward Input Current (each channel) ............................................................................................... 20mA (1ms duration) Average Forward Input Current ........................….(see Note 3) .......................................................................................... 10mA Reverse Input Voltage ...............................................................................................................................................................5V Output Current - IO (each channel) ...................................................................................................................................... 40mA Output Power Dissipation (each channel) ..............(see Note 2)........................................................................................ 50mW Supply Voltage - VCC ............................................... (see Note 1) ............................................................................... -0.5 to 20V Output Voltage - VO (each channel).……..............(see Note 1)............................................................................... . -0.5 to 20V Package Dimensions Schematic Diagram .790 [20.06] .820 [20.83] 1 2 XXXX DATE CODE Mii 6N140 .320 [8.13] MAX 3 4 A 15 VCC K 14 V01 A K 13 V02 PIN 1 0.170 [4.32 MAX] 6 .020 [0.51] 5 .290 [7.37] .310 [7.87] 0.150 [3.81] 7 .090 [2.29] .110 [2.79] 0.20 [0.51] MAX .007 [0.18] 0.13 [0.33] 8 A K 12 V03 A K 11 V04 10 GND ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] Notes: 1. Derate IF at 0.05 mA/°C above 25°C. 2. Collector output power plus one fourth of the total supply power is total output power. Derate at 0.46mW/°C above 25°C. 3. The lowest total IOH over temperature is developed by keeping VCC as low as possible, but greater that 2 volts. The negative voltage at the detector side should be applied to Pin 10. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 26 66012 FOUR CHANNEL, HERMETICALLY SEALED, LOW-INPUT CURRENT, 6N140 OPTOCOUPLER ELECTRICAL CHARACTERISTICS Ta = -55°C to 125°C unless otherwise specified. SYMBOL MIN TYP Current Transfer Ratio PARAMETER CTR 300 300 200 1000 750 400 Logic Low Output Voltage VOL 0.1 0.2 Logic High Output Current IOH High Level Output Current ICCH Low Level Supply Current ICCL VF Input Forward Voltage Input Reverse Breakdown Voltage BVR Input-Output Insulation Leakage Current II—O Propagation Delay Time To High Output Level tPLH Propagation Delay Time To Low Output Level tPHL MAX UNITS TEST CONDITIONS NOTE % % % IF = 0.5mA, VO = 0.4V, VCC = 4.5V IF = 1.6mA, VO = 0.4V, VCC = 4.5V IF = 5.0mA, VO = 0.4V, VCC = 4.5V 1,2 1,2 1,2 0.4 0.4 V V IF = 0.5mA, IOL = 1.5mA, VCC = 4.5V IF = 5.0mA, IOL = 10mA, VCC = 4.5V 1 .005 250 µA IF = 2µA, VO = VCC = 18V 1,3 .010 40 µA IF1 =IF2 =IF3 =IF4 = 0mA, VCC = 18V 2 4 mA IF1= IF2 = IF3 = IF4=1.6mA, VCC = 18V 1.4 1.8 V IF = 1.6mA 1 V IR = 10µA 1 1.0 µA VI—0 = 1500Vdc, Relative Humidity = 45% tA = 25°C, t = 5s 4 5 4 60 30 µs IF = 0.5mA, VCC = 5.0V, RL = 4.7kΩ IF = 5mA, VCC = 5.0V, RL = 680kΩ 8 2 100 10 µs 5 µs µs TYPICAL CHARACTERISTICS Ta = 25°C, VCC = 5V Each Channel PARAMETER SYMBOL MIN TYP MAX IF = 0.5mA, VCC = 5.0V, RL = 4.7kΩ IF = 5mA, VCC = 5.0V, RL = 680kΩ UNITS TEST CONDITIONS Input Capacitance CIN 60 pF VF = 0, f = MHz, ta = 25°C 1 Capacitance (Input-Output) CI-O 1.5 pF f = 1MHz, ta = 25°C 1, 5 Input Diode Temperature Coefficient ∆vF -1.8 mV/°C IF = 1.6mA 1 ∆TA Resistance (Input-Output) RI-0 10 Ω VI—O = 500V, ta = 25°C 1, 5 Resistance (Input-Input) RI-I 10 Ω VI—I = 500V, ta = 25°C 6 Input-Input Insulation Leakage Current II-I 0.5 nA Relative Humidity = 45% VI—I = 500V, t = 5s 6 1000 V/µs VCM = 50V P-P ,VCC = 5.0V, RL = 1.5kΩ, IF = OmA 7,9 Common Mode Transient immunity at High Output Level CMH 500 12 12 NOTE 8,9 Common Mode Transient Immunity CML 500 1000 V/µs VCM = 50V P-P ,VCC = 5.0V, at Low Output Level RL = 1.5kΩ, IF = 1.6mA NOTES: 1. Each channel. 2. CURRENT TRANSFER RATIO is defined as the ratio of output collector current, IO, to the forward LED input current., IF , times 100%. 3. IF = 2µA for channel under test. For all other channels, IF = 10mA. 4. Device considered a two-terminal device. Pins 1-6 and 16 are shorted together and pins 7-14 are shorted together. 5. Measured between each input pair shorted together. 6. Measured between adjacent pairs shorted together, i.e. between pins 1 and 2 shorted together and pins 3 and 4 shorted together, etc. 7. CMH is the maximum tolerable common mode transient to assure that the output will remain in a high logic state (ie. VO > @.0V). 8. CML is the maximum tolerable common mode transient to assure that the output will remain in a low logic state (ie. VO < 0.8V). 9. In applications where dv/dt may exceed 50,000 V/µs (such as static discharge) a series resistor, RCC , should be included to protect the detector IC”s from destructively high surge currents. The recommended value is RCC = 1V = kΩ 0.6IF (mA) RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 2 µA Input Current, High Level IFH 0.5 5 mA VCC 2.0 18 V Supply Voltage UNITS SELECTION GUIDE PART NUMBER 66012-001 66012-002 66012-003 66012-004 PART DESCRIPTION DSCC Dwg 8302401EX Quad Channel Optocoupler Quad Channel optocoupler, commercial, tested over full military temperature range (-55°C to +125°C) Quad Channel optocoupler, commercial (0° to +70°C) Quad Channel optocoupler, commercial (-40°C to +85°C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 28