Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Performance RFI Filters for Switching Power Supplies N Series UL Recognized CSA Certified VDE Approved 6VN1 10VN1 N Series Specifications • Superior attenuation for most digital electronic equipment over the frequency range of 10kHz to 30MHz Maximum leakage current each Line to Ground: @ 120 VAC 60 Hz: 1.2 mA @250 VAC 50 Hz: 2.0 mA • Provides excellent common mode and differential mode performance Hipot rating (one minute): Line to Ground: Line to Line: • Cost-effective solution to very noisy equipment that must meet conducted emission limits 2250 VDC 1450 VDC Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 6 to 10A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 Ordering Information 10 V N 1 Electrical Schematics Input / Output Style 1 – .250 [6.3] spade terminals 3VN N Series LINE LOAD Leakage current designation V – Standard Current Rating 6 or 10A 10VN Available Part Numbers 6VN1 LINE LOAD 10VN1 56 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Performance RFI Filters for Switching Power Supplies (continued) N Series Case Styles Performance Data Typical Insertion Loss Measured in closed 50 Ohm system B C 10VN1 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 0 1 10 0.01 0.1 1 10 30 Frequency in MHz 0 0.01 0.1 1 10 30 Frequency in MHz Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Case Dimensions 6VN1 db 100 10 Part No. 10VN db 100 RFI Power Line Filters D E A 6VN Minimum Insertion Loss A B C D E Measured in closed 50 Ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 57 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com