Bulletin 700-SE Solid-State Relays Overview/Product Selection Bulletin 700-SE Table Of Contents • • • • • • Product Selection . . . . . . . . 42 Accessories . . . . . . . . . . . . . 43 Specifications . . . . . . . . . . . 44 Approximate Dimensions . . . . . . . . . . . . . 46 Input-toOutput Isolation Method 20 A (resistive) Max. Continuous Load (Output) Current with Heat Sink 264V AC Max. Load Voltage Range 5,12, or 24V DC Control/Input Voltage Built-in Varistor Helps Absorb Most Electrical Surges Low Profile (Flat Pack) Design Quick-Connect #110 Input and #250 Output Terminals Zero Cross Function LED Indicator Rated Output (Load) Max. Current and Voltage Range ➊ Rated Input Control Voltage Cat. No. Factorystocked Item (single pack) 5V DC 700-SE05GZZ05 ✔ 5 A at 100…240V AC 12V DC 700-SE05GZZ12 ✔ 24V DC 700-SE05GZZ24 ✔ 5V DC 700-SE10GZZ05 ✔ 12V DC 700-SE10GZZ12 ✔ 24V DC 700-SE10GZZ24 ✔ 10 A at 100…240V AC Yes 20 A at 100…240V AC Phototriac 700-SE20GZZ05 ✔ 700-SE20GZZ12 ✔ 24V DC 700-SE20GZZ24 ✔ 5V DC 700-SE05GNZ05 ✔ 12V DC 700-SE05GNZ12 ✔ 24V DC 700-SE05GNZ24 ✔ 5V DC 700-SE10GNZ05 ✔ 12V DC 700-SE10GNZ12 ✔ 24V DC 700-SE10GNZ24 ✔ 5V DC 700-SE20GNZ05 ✔ 12V DC 700-SE20GNZ12 ✔ 24V DC 700-SE20GNZ24 ✔ No 5 A at 100…240V AC No 10 A at 100…240V AC 20 A at 100…240V AC ➊ Maximum load current when mounted on a heat sink. 42 5V DC 12V DC Bulletin 700-SE Solid-State Relays Accessories Description Heat Sink — Panel or DIN Rail Mount ➊ Pkg. Quantity Cat. No. Factory-stocked Item 1 700-S10 ✔ 1 700-S20 ✔ 10 199-DR1 ✔ Cat No. 700-S10 Heat Sink — Panel or DIN Rail Mount ➊ Cat No. 700-S20 DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package. Order must be for 10 rails or multiples of 10. Cat No. 199-DR1 ➊ Refer to "Load Current Vs. Ambient Temperature Characteristics" page 45 for information about how to select the correct size of heat sink for your application ( cat. no. 700-S10, 700-S20). 43 Bulletin 700-SE Solid-State Relays Specifications Control/Input Ratings ➊ Cat. No. Rated Control Voltage Input Impedance Operating Control Voltage Range Control Voltage Levels With Zero Cross Function Without Zero Cross Function Pick-up Voltage 700-SE_ _ _Z05 5V DC 4…6V DC 250 Ω ± 20% 300 Ω ± 20% 4V DC max. 700-SE_ _ _Z12 12V DC 9.6…14.4V DC 600 Ω ± 20% 800 Ω ± 20% 9.6V DC max. 700-SE_ _ _Z24 24V DC 19.2…28.8V DC 1.6k Ω ± 20% Drop-out Voltage 1V DC min. 19.2V DC max. Load/Output Ratings Applicable Load Continuous Load Current (Resistive) Cat. No. Rated Load Voltage With Heat Sink ➋ Load Voltage Range 700-SE05… 700-SE10… 100…240V AC 75…264V AC 700-SE20… Without Heat Sink ➋ Max. Inrush Current ➌ Min. Max. Min. Max. 0.1 A 5A 0.1 A 5A 60 A (@50/60 Hz, 1 cycle) 0.1 A 10 A 0.1 A 5A 150 A (@50/60 Hz, 1 cycle) 0.1 A 20 A 0.1 A 5A 220 A (@50/60 Hz, 1 cycle) Characteristics Item 700-SE_ _ _Z… 700-SE_ _ _N… Load Switching Method/Device Triac Pick-up time 1/2 of load power source cycle + 1 ms max. Drop-out time 1 ms max. 1/2 of load power source cycle + 1 ms max. Output ON voltage drop 1.6 V (RMS) max. Output Leakage current 5 mA max. (at 100V AC) 10 mA max. (at 200V AC) Output VDRM VCEO (V) 600 600 Output di/dt (A/uS) SE05GZ=100 SE10GZ & SE20 GZ =50 SE05GN=100 SE10 GN & SE20GN =50 Output dv/dt (V/uS) SE05GZ=200, SE10GZ=500, SE20GZ=100 SE05GN =200, SE10GN =500, SE20GN =100 Output I2t (A2S) SE05GZ =24.5, SE10GZ =60, SE20GZ =260 SE05GN =24.5, SE10GN =60, SE20GN =260 125 125 Output Tj (°C) max. Insulation resistance 100 MΩ min. (at 500V DC) Dielectric strength 2,000V AC, 50/60 Hz for 1 min. Vibration resistance (max.) 10…55 Hz, 1.5 mm double amplitude (10 G) 1,000 m/s2 Shock resistance (max.) Ambient temperature Ambient humidity Standards Weight (100 G) Operating: –30…80°C (–22…176°F) with no icing or condensation Storage: –30…100°C (–22…212°F) with no icing or condensation Operating 45…85% (no condensation) UL 508, CSA C22.2 , TUV, CE Approx. 37 g ➊ Each 5 A, 10 A, and 20 A model has 5V DC, 12V DC, and 24V DC input versions. ➋ Refer to "Load Current Vs. Ambient Temperature Characteristics" graphs page 45 regarding maximum load current with and without heat sinks. ➌ If the SSR operation is continuous ON/OFF, this value should be reduced by 50%. Refer to the “Inrush Current Resistivity” graphs on page 45 for more details. 44 Bulletin 700-SE Solid-State Relays Specifications, Continued Load Current vs. Ambient Temperature Characteristics 700-SE10… With standard heat sink (700-S20) or aluminum plate measuring 300 mm x 300 mm x 2 mm (W x H x D) With standard heat sink (700-S10) or aluminum plate measuring 100 mm x 100 mm x 2 mm (W x H x D) Load current (A) Without heat sink Load current (A) 700-SE20… Without heat sink Load current (A) 700-SE05… Without heat sink Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) Inrush Current Resistivity➊ Energizing time (ms) 700-SE20... Inrush current (A. Peak) Inrush current (A. Peak) 700-SE10... Inrush current (A. Peak) 700-SE05... Energizing time (ms) Energizing time (ms) ➊ Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability once every 2…5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR. 45 Bulletin 700-SE Solid-State Relays Approximate Dimensions Mounting Considerations➊➋➌ Note: All units are in millimeters unless otherwise indicated. Dimensions are not intended for manufacturing purposes. 3.5 dia. hole Terminal Arrangement/ Internal Connections (Top View) 47.5 max. 37.5 max. 14.5 3+ 30±0.5 Input voltage Two #110 (t = 0.5) (Faston tab or equivalent)* 6.5 Two #250 (t = 0.8) (Faston tab or equivalent) 7.1 2.9 1 Input Input 4- Load 2 Load power supply 7.95 6 11.5 max. 3 Mounting Holes Two, 3.5-dia. or M3 holes 30±0.2 ➊ The proper mounting orientation of the heat sink is so the heat fins run perpendicular to the floor (vertical) to maximize ventilation flow. If the fins do not run perpendicular to the floor, a 30% current derating is required. ➋ When attaching a heat sink to Bulletin 700-SE, apply heat conductive grease on the heat sink to maximize heat transfer between the SSR and the heat sink. Recommended types: Silicon based, Toshiba YG6240; Non-silicon based, AOS company type 53300. ➌ Tighten the SSR’s panel/heat sink mounting screws to a torque of 0.78…0.98 Nm (6.9…8.7 lb.-in.) Heat Sinks Mounting Holes ➍ Cat. No. 700-S10 Weight: Approx. 200 g Two, M3 holes Two, M4 holes 4.6 dia. hole Two, 3.2-dia. holes 90±0.4 44 max. 30 35 30.5±0.3 47.6 47 max. 5 5.6 6 77 max. Two, 4.4-dia. or M4 holes 4.5 51 max. 90±0.3 100 max. 35±0.2 Cat. No. 700-S20 Mounting Holes Weight: Approx. 400 g 4.6 dia. hole Two, M3 holes Two, M4 holes 71 max. 35 30.5±0.3 47.6 Two, 3.2-dia. holes 5.6 77 max. 90±0.4 75 max. 30 28 5 100 max. Two, 4.4-dia. or M4 holes 4.5 13 90±0.3 35±0.2 100 max. ➍ Tighten the heat sink’s panel mounting screws (M4) to a torque of 0.59…0.98 Nm (5.22…8.67 lb.-in.). Basic Application Considerations + R C SSR Input – • Because the operation time of Bulletin 700-SE is extremely short, take measures to suppress noise induced between the input terminals. If generation of strong noise is expected, connect an external noise absorber such as an RC circuit. • Do not apply excessive force to the terminals. Exercise care when pulling or inserting the terminal clips. • Bulletin 700-SE has a built-in varistor to absorb most inrush/surge currents when operating AC inductive loads If additional suppression is required, connect an external varistor across the load device terminals. Select a varistor that meets the load voltage outlined in the table below. • For additional details on applying solid-state relays, refer to pub. 700-AT001A-EN-P, "Solid-State Relay Application Guide." Document available at www.theautomationbookstore.com. 46 Load Voltage Varistor Voltage 100…120V AC 240…270 V 200…240V AC 440…470 V 380…480V AC 820…1000 V Varistor Surge Resistance 1000 A min.