AC/DC Input Solid State Relay PCS15 FEATURES E93379 INPUT PARAMETERS (Ta = 35°C) OUTPUT PARAMETERS (Ta = 35°C) 3 - 32 VDC (Without LED) Control Voltage Range (DC Input) 4 - 32 VDC (With LED) 85 - 132 VAC (110 VAC Input) Control Voltage Range (AC Input) 175 - 264 VAC (220 VAC Input) 19.2 - 28.8 VAC (24 VAC Input) Must Turn-On Voltage (DC Input) Max. Transient Voltage Load Current Load Current Range 4 VDC (With LED) Max. I2t (10 ms, A2s) 175 VAC (220 VAC Input) 19.2 VAC (24 VAC Input) Must Turn-Off Voltage (DC Input) 1 VDC 10 VAC (110 V, 220 V Input) Must Turn-Off Voltage (AC Input) Load Voltage Range 3 VDC (Without LED) 85 VAC (110 VAV Input) Must Turn-On Voltage (AC Input) 10 A to 40 A Output DC Input: 3-32 VDC, or AC Input: 24, 110 or 220 VAC Panel Mount Built in Snubber 4,000 VAC Opto-Isolation Between Input and Output Encapsulated, Thermally Conductive Epoxy RoHS Compliant 2 VAC (24 V Input) 25 mA (DC) Max. Input Current 15 mA (AC) Max Reverse Protection Voltage (DC Input) - 32 VDC 240 A 380 A 48 - 280 VAC 48 - 440 VAC 240 A 600 Vpk 800 Vpk 380 A 10 15 20 25 40 0.1 - 10 0.1 - 15 0.1 - 20 0.1 - 25 0.1 - 40 78 144 312 312 880 Max. Surge Current (10 ms) 100 Apk 150 Apk 200 Apk 250 Apk 400 Apk Max. Off-State Leakage 10 mA Current Max. On-State Voltage 1.5 VRMS Drop Max. Turn-On Time Zero –Cross: 1/2 Cycles + 1 ms; Random: 1 ms (DC Input) Max. Turn-On Time 30 ms (AC Input) AC Input: 40 ms Max. Turn-Off Time DC Input: 1/2 Cycles + 1 ms Min. Off-State dv/dt 200 V/us Min. Power Factor 0.5 Operating Temperature - 30°C to 80°C Storage Temperature - 30°C to 100°C CHARACTERISTICS 2,500 VAC, 50 Hz/60 Hz, 1 min, Input, Output to Base Dielectric Strength 4,000 VAC, 50 Hz/60 Hz, 1 min, Input to Output Insulation Resistance 1,000 MΩ at 500 VDC Weight 70 g ORDERING INFORMATION Example: PCS15 -D -24A -10 Z Model: PCS15 Control Voltage: D: 3-32 VDC (Without LED), 4-32 VDC (With LED); 24A: 24 VAC; 110A: 110 VAC; 220A: 220 VAC Load Voltage: 240A: 48-280 VAC; 380A: 48-440 VAC Load Current: 10: 10 A; 15: 15 A; 20: 20 A; 25: 25 A; 40: 40 A Switching Type: Z: Zero Crossing; R: Random Turn-On Status LED: Nil: Not Included; L: Indicaor LED Terminal Type: Nil: Screw Terminal; Q: Quick Connect (1/4” Control, 3/8” Power) Box Quantity: 100; Inner Box: 2 L 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 Dimensions are listed for reference purposes only. PCS15 Rev B 9/16/2015 For Accessories and Heat Sink see page 3 www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 1 of 3 PCS15 PCS15 PRECAUTIONS 1) 2) 3) 4) When choosing a Solid State Relay (SSR), note the actual load current and ambient temperature and reference the Characteristic Curves below. SSRs require a adequate heat sinking or other effective cooling measures. With ambient temperature above 25°C refer to the curve of Max. Load Current vs Ambient Temperature for load current derating. recommended screw installation torque as follows : 5) M4 screw mounting 6) 7) 8) 9) will damage the SSR with heat generated from connections. Also, excessive to the Current Load. With any heat sink test that the SSR base temperature does not exceed 65"C. When using the PCS15 relay with an inductive load, it is suggested to select random do not choose products with varistor protection (i.e., a model with “Y” letter Listed parameters are based on resistive loads. Do not use the relay beyond the described current, temperature, load or voltage limits as described in this data sheet. DIMENSIONS (mm) QUICK CONNECT 2 ‐ 4.75 mm x 0.8 mm Faston Terminal SCREW TERMINAL 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 Dimensions are listed for reference purposes only. PCS15 Rev B 9/16/2015 2 ‐ 6.35 mm x 0.8 mm Faston Terminal www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 2 of 3 PCS15 PCS15 ACCESSORIES Heat Transfer Pad - HTP SSR 33x57 or HTP SRR 46x62 Finger Guard / Protective Cover - SSR100 -PCH-I-50 for the 30 VDC/50 Amp and 200 VDC/10 Amp Applications Heat Sinks -PCH-H-110 for the 400 VDC/10 Amp, 150 VDC/50 Amp, 100 VDC/20 Amp, 50 VDC/40 Amp and 30 VDC/100 Amp Application -PCH-H-150 for the 50 VDC/80 Amp, 100 VDC/40 Amp, 200 VDC/40 Amp Application CHARACTERISTIC CURVES With a PCH-I-50 Heat Sink With a PCH-H-110 Heat With a PCH-I-50 Heat Sink With a PCH-H-110 Heat Sink With a PCH-H-150 Heat Sink 3220 Commander Drive, Suite 102 Carrollton, TX 75006 Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 Dimensions are listed for reference purposes only. PCS15 Rev B 9/16/2015 www.PickerComponents.com e-mail: [email protected] Specifications and Availability subject to change without notice. 3 of 3