Model 72984 SMB JACK STRAIGHT CRIMP, RG174, 188, 316 Model 72984 SMB JACK STRAIGHT CRIMP, RG174, 188, 316 Snap-on coupling and small size for fast connect and disconnect. Features Specifications • DC - 3 GHz bandwidth. • Meets MIL-C-39012, IEC 60169-1Q, BS9210N0007, NFC93650, CECC 22130. Impedance 50 Ω • Small size and durability for RF coaxial applications. Frequency Range DC - 3 GHz • Precision machined and gold-plated for low loss. VSWR 1.4 max. Working Voltage 250 Vrms max. Dielectric withstand voltage 750 Vrms Center / Outer contact resistance 6 / 1 mΩ Number of insertions 500 cycles min. Insulation resistance 1,000 MΩ min. Temperature Range -65˚ C to 165˚ C, -85˚ F to 329˚ F Materials • • • • • Body is machined brass with gold plating. Center contacts – Plug is gold plated brass and Jack is gold plated beryllium copper. High quality PTFE insulators. Crimp Ferrules are nickel plated copper. Silicone rubber gaskets. Ordering Information Model: 72984 Description: SMB JACK STRAIGHT CRIMP, RG174, 188, 316 USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003424 REV 001 Copyright © 2007 10/19/2007 Page 1 of 2 Model 72984 SMB JACK STRAIGHT CRIMP, RG174, 188, 316 Cable Types and Crimp Die Information Connector Model # Crimp Die Cavity Size for Outer Ferrule 72984 RG174, 188, 316 Crimp Die Cavity Size for Outer Ferrule .128 (3.3) Cable Assembly Instructions USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003424 REV 001 Copyright © 2007 10/19/2007 Page 2 of 2