74AC10 TRIPLE 3-INPUT NAND GATE PRELIMINARY DATA ■ ■ ■ ■ ■ ■ ■ ■ ■ HIGH SPEED: tPD = 4 ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 4 µA (MAX.) at TA = 25 oC HIGH NOISE IMMUNITY: VNIH = VNIL = 28% VCC (MIN.) 50Ω TRANSMISSION LINE DRIVING CAPABILITY SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH ≅ tPHL OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 10 IMPROVED LATCH-UP IMMUNITY DESCRIPTION The AC10 is an advanced high-speed CMOS TRIPLE 3-INPUT NAND GATE fabricated with sub-micron silicon gate and double-layer metal B M (Plastic Package) (Micro Package) ORDER CODES : 74AC10B 74AC10M wiring C2MOS technology. It is ideal for low power applications mantaining high speed operation similar to equivalent Bipolar Schottky TTL. The internal circuit is composed of 3 stages including buffer output, which enables high noise immunity and stable output. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage. PIN CONNECTION AND IEC LOGIC SYMBOLS May 1997 1/7 74AC10 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL 1, 3, 9 1A to 3A Data Inputs NAME AND F UNCTIO N 2, 4, 10 1B to 3B Data Inputs 13, 5, 11 1C to 3C Data Inputs 12, 6, 8 1Y to 3Y Data Outputs 7 GND Ground (0V) 14 VCC Positive Supply Voltage TRUTH TABLE A B C Y L X X H X L X H X X L H H H H L ABSOLUTE MAXIMUM RATINGS Symbol VCC Parameter Supply Voltage Value Unit -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK DC Input Diode Current ± 20 mA IOK DC Output Diode Current ± 20 mA IO DC Output Current ± 50 mA ± 150 mA ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec) -65 to +150 o C 300 o C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. RECOMMENDED OPERATING CONDITIONS Symbol VCC Parameter Supply Voltage Un it 2 to 6 V V VI Input Voltage 0 to VCC VO Output Voltage 0 to VCC Top dt/dv Operating Temperature: Input Rise and Fall Time VCC = 3.0, 4.5 or 5.5 V(note 1) 1) VIN from 30% to 70% of VCC 2/7 Value -40 to +85 8 V o C ns/V 74AC10 DC SPECIFICATIONS Symbol Parameter Test Con dition s VIH High Level Input Voltage 3.0 VO = 0.1 V or VCC - 0.1 V 4.5 5.5 VIL Low Level Input Voltage Value T A = 25 oC V CC (V) 3.0 Min. Typ. 2.1 1.5 2.1 3.15 2.25 3.15 3.85 2.75 VO = 0.1 V or VCC - 0.1 V 4.5 5.5 VOH High Level Output Voltage 3.0 4.5 (*) VI = V IH or V IL 5.5 Low Level Output Voltage Max. Min . Max. V 3.85 1.5 0.9 0.9 2.25 1.35 1.35 2.75 1.65 1.65 I O=-50 µA 2.9 2.99 2.9 IO=-50 µA 4.4 4.49 4.4 IO=-50 µA 5.4 5.49 5.4 IO=-12 mA 2.56 2.46 IO=-24 mA 3.86 3.76 5.5 IO=-24 mA 4.86 3.0 IO=50 µA 0.002 0.1 0.1 IO=50 µA 0.001 0.1 0.1 IO=50 µA 0.001 0.1 0.1 IO=12 mA 0.36 0.44 4.5 IO=24 mA 0.36 0.44 5.5 IO=24 mA 0.36 0.44 4.5 V I (*) = V IH or V IL 5.5 3.0 V V 4.5 3.0 VOL Unit -40 to 85 o C 4.76 V Input Leakage Current 5.5 VI = VCC or GND ±0.1 ±1 µA ICC Quiescent Supply Current 5.5 VI = VCC or GND 4 40 µA IOLD Dynamic Output Current (note 1, 2) 5.5 VOLD = 1.65 V max 75 mA VOHD = 3.85 V min -75 mA II IOHD 1) Maximum test duration 2ms, one output loaded at time 2) Incident wave switching is guaranteed on transmission lines with impedances as low as 50 Ω. (*) All outputs loaded. AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, RL = 500 Ω, Input tr = t f =3 ns) Symbol Parameter T est Cond ition V CC (V) tPLH tPHL Propagation Delay Time (*) 3.3 5.0(**) Value T A = 25 oC -40 to 85 o C Min. Typ. Max. Min . Max. 1.5 1.5 5.5 4 8.5 6 1 1 10.0 7 Unit ns (*) Voltage range is 3.3V ± 0.3V (**) Voltage range is 5V ± 0.5V CAPACITIVE CHARACTERISTICS Symbol Parameter Test Con dition s V CC (V) Value o T A = 25 C Min. Typ. Max. Unit o -40 to 85 C Min . Max. CIN Input Capacitance 5.0 4.5 pF C PD Power Dissipation Capacitance (note 1) 5.0 25 pF 1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD • VCC • fIN + ICC/n (per circuit) 3/7 74AC10 TEST CIRCUIT CL = 50 pF or equivalent (includes jig and probe capacitance) RL = R1 = 500Ω or equivalent RT =ZOUT of pulse generator (typically 50Ω) WAVEFORM: PROPAGATION DELAYS (f=1MHz; 50% duty cycle) 4/7 74AC10 Plastic DIP-14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 5/7 74AC10 SO-14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8 (max.) P013G 6/7 74AC10 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1997 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . 7/7