Revised October 2001 74ALVC16501 Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs General Description Features The ALVC16501 is an 18-bit universal bus transceiver which combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes. ■ 1.65V–3.6V VCC supply operation Data flow in each direction is controlled by output-enable (OEAB and OEBA), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is HIGH. When LEAB is LOW, the A data is latched if CLKAB is held at a HIGH or LOW logic level. If LEAB is LOW, the A bus data is stored in the latch/flip-flop on the LOW-to-HIGH transition of CLKAB. When OEAB is HIGH, the outputs are active. When OEAB is LOW, the outputs are in a highimpedance state. Data flow for B to A is similar to that of A to B but uses OEBA, LEBA, and CLKBA. The output enables are complementary (OEAB is active HIGH and OEBA is active LOW). The ALVC16501 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O capability up to 3.6V. The ALVC16501 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. ■ 3.6V tolerant inputs and outputs ■ tPD (A to B, B to A) 3.4 ns max for 3.0V to 3.6V VCC 4.0 ns max for 2.3V to 2.7V VCC 7.0 ns max for 1.65V to 1.95V VCC ■ Power-down high impedance inputs and outputs ■ Supports live insertion/withdrawal (Note 1) ■ Uses patented noise/EMI reduction circuitry ■ Latchup conforms to JEDEC JED78 ■ ESD performance: Human body model > 2000V Machine model >200V Note 1: To ensure the high-impedance state during power up or power down, OEBA should be tied to VCC through a pull-up resistor and OEAB should be tied to GND through a pull-down resistor; the minimum value of the resistors is determined by the current-sourcing capability of the driver. Ordering Code: Order Number Package Number Package Description 74ALVC16501MTD MTD56 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. © 2001 Fairchild Semiconductor Corporation DS500683 www.fairchildsemi.com 74ALVC16501 Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs October 2001 74ALVC16501 Connection Diagram Pin Descriptions Pin Names Description OEAB Output Enable Input for A to B Direction (Active HIGH) OEBA Output Enable Input for B to A Direction (Active LOW) LEAB, LEBA Latch Enable Inputs CLKAB, CLKBA Clock Inputs A1–A18 Side A Inputs or 3-STATE Outputs B1–B18 Side B Inputs or 3-STATE Outputs Function Table (Note 2) Inputs OEAB Outputs LEAB CLKAB An Bn L X X X Z H H X L L H H X H H H L ↑ L L H L ↑ H H H L H X B0 (Note 3) H L L X B0 (Note 4) H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial (HIGH or LOW, inputs may not float) Z = High Impedance Note 2: A-to-B data flow is shown; B-to-A flow is similar but uses OEBA, LEBA and CLKBA. OEBA is active LOW. Note 3: Output level before the indicated steady-state input conditions were established. Note 4: Output level before the indicated steady-state input conditions were established, provided that CLKAB was HIGH before LEAB went LOW. www.fairchildsemi.com 2 74ALVC16501 Logic Diagram 3 www.fairchildsemi.com 74ALVC16501 Absolute Maximum Ratings(Note 5) Recommended Operating Conditions (Note 7) −0.5V to +4.6V Supply Voltage (VCC) −0.5V to 4.6V DC Input Voltage (VI) Output Voltage (VO) (Note 6) Power Supply −0.5V to VCC +0.5V Operating DC Input Diode Current (IIK) VI < 0V −50 mA 0V to VCC Output Voltage (VO) DC Output Diode Current (IOK) 0V to VCC Free Air Operating Temperature (TA) VO < 0V −50 mA −40°C to +85°C Minimum Input Edge Rate (∆t/∆V) VIN = 0.8V to 2.0V, VCC = 3.0V DC Output Source/Sink Current ±50 mA (IOH/IOL) ±100 mA Supply Pin (I CC or GND) 10 ns/V Note 5: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. DC VCC or GND Current per Storage Temperature Range (TSTG) 1.65V to 3.6V Input Voltage (VI) −65°C to +150°C Note 6: IO Absolute Maximum Rating must be observed. Note 7: Floating or unused inputs must be held HIGH or LOW. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IOH = −100 µA VCC (V) Min 1.65 -1.95 0.65 x VCC 2.3 - 2.7 1.7 2.7 - 3.6 2.0 Max V 1.65 -1.95 0.35 x VCC 2.3 - 2.7 0.7 2.7 - 3.6 0.8 1.65 - 3.6 VCC - 0.2 IOH = −4 mA 1.65 1.2 IOH = −6 mA 2.3 2 IOH = −12 mA 2.3 1.7 2.7 2.2 V V 3.0 2.4 IOH = −24 mA 3.0 2 IOL = 100 µA 1.65 - 3.6 0.2 1.65 0.45 IOL = 6 mA 2.3 0.4 IOL = 12mA 2.3 0.7 IOL = 4 mA Units 2.7 0.4 IOL = 24 mA 3 0.55 V II Input Leakage Current 0 ≤ VI ≤ 3.6V 3.6 ±5.0 µA IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 3.6V 3.6 ±10 µA ICC Quiescent Supply Current VI = VCC or GND, IO = 0 3.6 40 µA ∆ICC Increase in ICC per Input VIH = VCC − 0.6V 3 -3.6 750 µA www.fairchildsemi.com 4 T A = −40°C to +85°C, RL = 500Ω Symbol CL = 50 pF Parameter V CC = 3.3V ± 0.3V Min fMAX Maximum Clock Frequency tPHL, tPLH Propagation Delay Bus to Bus tPHL, tPLH Propagation Delay CLK to Bus tPHL, tPLH Propagation Delay LE to Bus Max 250 CL = 30 pF V CC = 2.7V Min V CC = 2.5V ± 0.2V Max 200 Min V CC = 1.8V ± 0.15V Max Min 200 Units Max 100 ns 1.1 3.4 1.3 4.0 0.8 3.5 1.5 7.0 ns 1.1 4.0 1.3 4.9 0.8 4.4 1.5 8.8 ns 1.1 4.3 1.3 5.4 0.8 4.9 1.5 9.8 ns tPZL, tPZH Output Enable Time 1.1 4.3 1.3 5.4 0.8 4.9 1.5 9.8 ns tPLZ, tPHZ Output Disable Time 1.3 4.2 1.3 4.7 0.8 4.2 0.8 7.6 ns tW Pulse Width 1.5 1.5 1.5 4.0 ns tS Setup Time 1.5 1.5 1.5 2.5 ns tH Hold Time 1.0 1.0 1.0 1.0 ns Capacitance Symbol Parameter Conditions TA = +25°C VCC Typical Units CIN Input Capacitance VI = 0V or VCC 3.3 6 pF COUT Output Capacitance VI = 0V or VCC 3.3 7 pF CPD Power Dissipation Capacitance 3.3 20 2.5 20 Outputs Enabled f = 10 MHz, CL = 50 pF 5 pF www.fairchildsemi.com 74ALVC16501 AC Electrical Characteristics 74ALVC16501 AC Loading and Waveforms TABLE 1. Values for Figure 1 TEST SWITCH tPLH, tPHL Open tPZL, tPLZ VL tPZH, tPHZ GND FIGURE 1. AC Test Circuit TABLE 2. Variable Matrix (Input Characteristics: f = 1MHz; tr = tf = 2ns; Z0 = 50Ω) Symbol VCC 3.3V ± 0.3V 2.7V 2.5V ± 0.2V 1.8V ± 0.15V Vmi 1.5V 1.5V VCC/2 VCC/2 Vmo 1.5V 1.5V VCC/2 VCC/2 VX VOL + 0.3V VOL + 0.3V VOL + 0.15V VOL + 0.15V VY VOH − 0.3V VOH − 0.3V VOH − 0.15V VOH − 0.15V VL 6V 6V VCC*2 VCC*2 FIGURE 2. Waveform for Inverting and Non-inverting Functions FIGURE 3. 3-STATE Output High Enable and Disable Times for Low Voltage Logic FIGURE 4. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic FIGURE 5. Propagation Delay, Pulse Width and trec Waveforms www.fairchildsemi.com FIGURE 6. Setup Time, Hold Time and Recovery Time for Low Voltage Logic 6 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD56 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com 74ALVC16501 Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted