REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. 28.0MAX 3.0 ± 0.25 36.0 ± 0.2 DESCRIPTION DATE 06-01-06 RoHS Compliancy APPROVED DP ELECTRICAL CHARACTERISTICS: SAFETY MARK 32.0 ± 0.35 36.0MAX MECHANICAL DIMENSIONS: R2.0(4X) 28.0 ± 0.35 2.0 ± 0.25 REV. B 1-1. VOLTAGE RATING.....................................................250VAC 1-2. CURRENT RATING A. @ 250 VAC .........................................10 A RMS MAX 1-3. OPERATING FREQUENCY................................................... 50-60Hz 1-4. HIPOT RATING (FOR ONE MINUTE) A. LINE & NEUTRAL TO GROUND.............2000 VDC B. LINE TO NEUTRAL.....................................2000 VDC 1-5. MINIMUM INSULATION RESISTANCE: @ 500VDC A. LINE & NEUTRAL TO GROUND..............100M OHM B. LINE TO NEUTRAL......................................100M OHM 1-6. OPERATING TEMPERATURE .................................... -25°C TO +85°C 1-7. RoHS COMPLIANT 29.5MAX 45.0MAX R3.0MAX(4X) 32.0 ± 0.2 0 27.0 ± 0.2 0 Ø3.3 ± 0.15 SOLDERING PIN 6.0 ± 0.25(3X) 36.0 ± 0.1 PANEL CUTOUT ELECTRICAL SCHEMATIC: CUSTOMER TRANSFORMER PRIMARIES COPPER PLATE LAYOUT OF PCB FOR VOLTAGE SELECTOR CONNECTION FOR 220V ~ 240V CUSTOMER TRANSFORMER PRIMARIES CONNECT TO PIN 1 & 4 CONNECTION FOR 110V ~ 120V CUSTOMER TRANSFORMER PRIMARIES CONNECT TO PIN 1 & 3 Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. PPC DIVISION 755-00/28 Part Number: Description: MULTI-FUNCTION MODULE UNIT: mm REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 07-08-03 07-08-03 JJH / 07-08-03