RF SAW Filter Part Number Package Application Last Modified 803-RF455.0M-A 3.0 x 3.0 SMD CDMA450 Jan. 01, 2007 . TYPE : CDMA450, RF-Tx SAW Filter PART NUMBER : 803-RF455.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Condition Minimum Typical Maximum Units - - 455.0 - MHz 452.5~ 457.5 MHz - 1.8 2.8 dB 0.3~ 443.0 MHz 25 28 - 462.5~ 467.5 MHz 30 50 - 467.5~ 1700.0MHz 25 28 - 1700.0~ 2000.0 MHz 20 23 - Source Impedence (single ended)* - - 50 - ohm Load Impendance (single ended)* - - 50 - ohm 452.5~ 457.5 MHz - 1.4 2.0 - Maximum Input Power - - - 30 dBm Operating Temperature - -30 - +80 ºC Stop Band Attenuation: VSWR * No Matching Network . PACKAGE OUTLINE (mm) PIN LAYOUT TEST FIXTURE A Ground B Out C Ground D Ground E In F Ground dB Source/ Load Impedance = 50 ohms FREQUENCY RESPONSE VSWR SMITH CHART Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 803-RF455.0M-A