RF SAW Filter Part Number Package Application Last Modified 803-RF935.5M-B 3.0 x 3.0 SMD Wireless Mar. 2, 2007 . TYPE : RF SAW Filter for Wireless PART NUMBER : 803-RF935.5M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Condition Minimum Typical Maximum Units - - 935.5 - MHz 929.0~ 942.0 MHz - 2.5 3.0 dB D.C.~ 875.0 MHz 50 60 - 875.0~ 895.0 MHz 48 55 - 978.0~ 1005.0MHz 40 44 - 1005.0~ 1500.0 MHz 50 57 - Source Impedence (single ended)* - - 50 - ohm Load Impendance (single ended)* - - 50 - ohm VSWR 929.0~ 942.0 MHz - 1.45 2.0 - Amplitude Ripple 929.0~ 942.0 MHz - 0.3 0.8 dBp-p Maximum Input Power - - - 15 dBm Maximum DC Voltage - - - 5 V Operating Temperature - -30 - +65 ºC Stop Band Attenuation: * No Matching Network . PACKAGE OUTLINE (mm) PIN LAYOUT TEST FIXTURE A Ground B In C Ground D Ground E Out F Ground dB Source/ Load Impedance = 50 ohms FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 803-RF935.5M-B