Oscilent Corporation IF SAW Filter | 813-IF75.0M-B Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-IF75.0M-B 13.3 x 6.5 SMD Base Station & Repeater May 02 2003 . TYPE : 75.0 MHz Bandpass Filter 19.0 MHz Bandwidth PART NUMBER : 813-IF75.0M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 74.92 75.0 75.08 MHz Insertion Loss - 23.5 25.0 dB 1dB Bandwidth 18.75 18.82 - MHz 3dB Bandwidth 19.00 19.25 - MHz 35dB Bandwidth - 20.95 21.00 MHz 35 42 - dB Passband Ripple - 0.75 1.0 dB Group Delay Variation - 40 100 nsec Absolute Delay - 1.10 - µsec Substrate Material - LN - - Ambient Temperature - 25 - °C Center Frequency Ultimate Rejection * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE TEST FIXTURE (mm) L2 = 390nH C2 = 20pF Source/Load Impedance = 50 ohms Part No.: 813-IF75.0M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if75_0b.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 813-IF75.0M-B Page 2 of 2 Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if75_0b.htm 12/28/2005