Oscilent Corporation IF SAW Filter | 815-IF44.0M-A Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 815-IF44.0M-A 15.9 x 5.9 Thru Hole Digital Cable TV May 22 2003 . TYPE : 44.00 MHz Bandpass Filter 6.2 MHz Bandwidth PART NUMBER : 815-IF44.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 44.00 - MHz Insertion Loss - 16.0 17.0 dB 3 dB Bandwidth 6.15 6.2 - MHz 35 dB Bandwidth - 7.8 8.0 MHz Lower Sidelobe (35.0 ~ 39.90 MHz) 40 43 - dB Upper Sidelobe (48.1 ~ 50.0 MHz) 35 38 - dB Upper Sidelobe (50.0 ~ 55.0 MHz) 38 42 - dB Passband Ripple - 0.6 1.0 dB Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Source Impedance = 50 ohms Load Impedance = 2 Kohms / 3pF Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 815-IF44.0M-A