Oscilent Corporation IF SAW Filter | 838-IF75.0M-D Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 838-IF75.0M-D 38.0 x 25.0 Thru Hole Base Station & Repeater May 24 2003 . TYPE : 75.0 MHz Bandpass Filter 19.30 MHz Bandwidth PART NUMBER : 838-IF75.0M-D .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 69.95 75.00 75.05 MHz Insertion Loss - 22.80 25.0 dB 1dB Bandwidth 18.90 19.05 - MHz 3dB Bandwidth 19.30 19.50 - MHz 18dB Bandwidth - 20.29 20.40 MHz 33dB Bandwidth - 20.60 20.80 MHz 40dB Bandwidth - 20.70 20.90 MHz 50dB Bandwidth - 20.80 21.00 MHz Passband Ripple - 0.65 1.0 dB Group Delay Variation - 65 100 nsec dB Center Frequency Ultimate Rejection 50 55 - Substrate Material - LN - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Contact Oscilent for Test Fixture Details http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if75_0d.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 838-IF75.0M-D Page 2 of 2 Part No.: 838-IF75.0M-D Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if75_0d.htm 12/28/2005