RF SAW Filter Part Number Package Application Last Modified 864-RF881.5M-H 1.4 x 2.0 SMD CDMA Mar. 10, 2007 . TYPE : CDMA, Balanced RF-Rx SAW Filter PART NUMBER : 864-RF881.5M-H .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 881.5 - MHz Insertion Loss 869.0~ 894.0 MHz - 2.3 2.9 dB Attenuation: D.C.~ 824.0 MHz 50 64 - 824.0~849.0 MHz 45 60 - 915.0~ 960.0MHz 23 29 - Center Frequency (Fo) dB 960.0~ 6000.0 MHz 14 18 - Output Amplitude Balance (l S31/S21 l) - -1.0 0 1.0 dB Output Phase Balance (φ(S31)-φ(S21)+180º) - -5.0 0 5.0 degree Source Impedence (single ended)* - - 50 - ohm Load Impendance (balanced ended)* - - 100/56 - ohm//nH 869.0~ 894.0 MHz - 1.8 2.3 - 0.8 1.5 dBp-p VSWR within 869.0~ 894.0 MHz - Maximum DC Voltage - - - 5 V Maximum Input Power - - - 15 dBm Operating Temperature - -30 - +80 ºC Amplitude Ripple *Matching Network . PACKAGE OUTLINE (mm) PIN LAYOUT TEST FIXTURE A In B Ground C Balance Out D Balance Out E Ground FREQUENCY RESPONSE VSWR SMITH CHART Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 864-RF881.5M-H