Bulletin PD-20766 rev. B 02/04 8ETX06 8ETX06S 8ETX06-1 8ETX06FP Hyperfast Rectifier Features • • • • • trr = 15ns typ. IF(AV) = 8Amp VR = 600V Hyperfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature UL E78996 approved Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters VRRM Peak Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current @ TC = 143°C Max Units 600 V 8 A @ TC = 106°C (FULLPACK) IFSM Non Repetitive Peak Surge Current @ TJ = 25°C IFM Peak Repetitive Forward Current TJ, TSTG Operating Junction and Storage Temperatures 110 18 - 65 to 175 °C Case Styles 8ETX06 8ETX06S Base Cathode Base Cathode 2 2 8ETX06FP 8ETX06-1 2 1 1 Cathode 3 Anode TO-220AC www.irf.com 1 3 Anode N/C D2PAK 1 3 Cathode 3 Anode Anode N/C TO-262 TO-220 FULLPACK 1 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr Breakdown Voltage, Blocking Voltage VF IR Min Typ Max Units Test Conditions 600 - - V IR = 100µA Forward Voltage - 2.3 3.0 V IF = 8A, TJ = 25°C - 1.4 1.7 V IF = 8A, TJ = 150°C Reverse Leakage Current - 0.3 50 µA VR = VR Rated - 35 500 µA TJ = 150°C, VR = VR Rated CT Junction Capacitance - 17 - pF VR = 600V LS Series Inductance - 8.0 - nH Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TC = 25°C (unless otherwise specified) Parameters trr Min Typ Max Units Test Conditions Reverse Recovery Time IRRM Peak Recovery Current - 15 19 ns IF = 1A, diF/dt = 100A/µs, VR = 30V - 16 24 - 17 - TJ = 25°C - 40 - TJ = 125°C - 2.3 - - 4.5 - IF = 8A, diF/dt = 100A/µs, VR = 30V A IF = 8A TJ = 25°C diF /dt = 200A/µs VR = 390V TJ = 125°C Qrr Reverse Recovery Charge - 20 nC - 100 - trr Reverse Recovery Time - 31 - ns IRRM Peak Recovery Current - 12 - A Qrr Reverse Recovery Charge - 195 - nC TJ = 25°C TJ = 125°C IF = 8A TJ = 125°C diF /dt = 600A/µs VR = 390V Thermal - Mechanical Characteristics Parameters TJ Max. Junction Temperature Range TStg Max. Storage Temperature Range RthJC Thermal Resistance, Junction to Case RthJA Thermal Resistance, Junction to Ambient RthCS Min Typ Max Units - - 175 °C - 65 - 175 Per Leg - 1.4 2 (Fullpack) Per Leg - 3.4 4.3 - - 70 Thermal Resistance, Case to Heatsink - 0.5 - Weight - 2.0 - g - 0.07 - (oz) 6.0 - 12 Kg-cm 5.0 - 10 lbf.in Mounting Torque Per Leg °C/W Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 100 1000 T J = 175˚C Reverse Current - I R (µA) 10 150˚C 125˚C 10 100˚C 1 0.1 25˚C 0.01 0.001 0 T J = 175˚C 0 100 200 300 400 500 600 Reverse Voltage - VR (V) T = 150˚C J Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage T = 25˚C J 1000 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 100 1 T = 25˚C J 100 10 0.1 0 0.5 1 1.5 2 2.5 3 3.5 4 0 4.5 100 200 300 400 500 600 Reverse Voltage - VR (V) Forward Voltage Drop - VFM (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 1 - Typical Forward Voltage Drop Characteristics Thermal Impedance Z thJC (°C/W) 10 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 t1 t2 0.1 0.01 0.00001 www.irf.com PDM Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 1 3 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Thermal Impedance Z thJC (°C/W) 10 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 1 0.1 PDM t1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK) 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) 180 170 DC 160 150 140 Square wave (D = 0.50) Rated Vr applied 130 see note (3) 120 0 2 4 6 8 10 12 160 140 DC 120 100 Square wave (D = 0.50) 80 Rated Vr applied 60 see note (3) 40 0 2 4 6 8 10 12 Average Forward Current - IF(AV) (A) Average Forward Current - IF(AV) (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK) Average Power Loss ( Watts ) 20 18 16 14 RMS Limit 12 10 6 4 (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 8 DC 2 Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 0 0 2 4 6 8 10 12 Average Forward Current - IF(AV) (A) 14 Fig. 8 - Forward Power Loss Characteristics 4 www.irf.com 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 300 50 V R = 390V T J = 125˚C T J = 25˚C 250 IF = 16 A 40 200 IF = 16 A Qrr ( nC ) trr ( ns ) IF = 8 A 30 150 IF = 8 A 100 IF = 16 A IF = 16 A 20 50 V R = 390V T J = 125˚C T J = 25˚C IF = 8 A IF = 8 A 10 100 0 100 1000 di F /dt (A/µs ) Fig. 9 - Typical Reverse Recovery vs. di F /dt 1000 di F /dt (A/µs ) Fig. 10 - Typical Stored Charge vs. di F /dt Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. diF /dt dif/dt ADJUST D G IRFP250 S Fig. 11- Reverse Recovery Parameter Test Circuit www.irf.com 5 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 3 t rr IF tb ta 0 Q rr 2 I RRM 4 0.5 I RRM di(rec)M/dt 5 0.75 I RRM 1 diFf /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 12 - Reverse Recovery Waveform and Definitions Outline Table 10.54 (0.41) MAX. 1.32 (0.05) 3.78 (0.15) 3.54 (0.14) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 1.22 (0.05) DIA. Base Cathode 2 6.48 (0.25) 6.23 (0.24) 3 2° 1 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) Cathode 3 Anode 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 0.94 (0.04) 2.64 (0.10) 0.69 (0.03) 1 4.57 (0.18) 3 0.61 (0.02) MAX. 4.32 (0.17) 5.08 (0.20) REF. 6 Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches) www.irf.com 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Outline Table 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 5.28 (0.21) 2.32 (0.09) 4.78 (0.19) REF. 1.40 (0.055) 1.14 (0.045) 2X 2 0.55 (0.02) 8.89 (0.35) 3X Base Cathode 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 3 1 Anode N/C 1 3 4.57 (0.18) 4.32 (0.17) 2 8.89 (0.35) 17.78 (0.70) 0.61 (0.02) MAX. 5.08 (0.20) REF. 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) Conforms to JEDEC Outline D2PAK Dimensions in millimeters and (inches) 2X 2 1 N/C 3 Anode NC Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) www.irf.com 7 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Outline Table 10.6 HOLE ø 3.4 10.4 3.1 1 3.2 Cathode 3 Anode 15.8 16.0 15.4 16.4 7.1 6.7 3.7 2.8 2.6 13.7 2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.05 13.5 3.3 3.1 10° TYP 1.3 R0.7 (2 PLACES) 4.8 4.6 R0.5 Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) 5°± 0.5° 5°± 0.5° Ordering Information Table Device Code 8 E T X 06 -1 1 2 3 4 5 6 1 - Current Rating (8 = 8A) 2 - E = Single Diode 3 - T = TO-220, D2Pak 4 - X = HyperFast Recovery 5 - Voltage Rating (06 = 600V) 6 - "-1" = TO-262 Option S = D2Pak None = TO-220AC FP 8 = TO-220 FULLPACK www.irf.com 8ETX06, 8ETX06S, 8ETX06-1, 8ETX06FP Bulletin PD-20766 rev. B 02/04 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/04 www.irf.com 9