IRF630S, SiHF630S Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) • Halogen-free According to IEC 61249-2-21 Definition • Surface Mount • Available in Tape and Reel • Dynamic dV/dt Rating • Repetitive Avalanche Rated • Fast Switching • Ease of Paralleling • Simple Drive Requirements • Compliant to RoHS Directive 2002/95/EC 200 RDS(on) () VGS = 10 V 0.40 Qg (Max.) (nC) 43 Qgs (nC) 7.0 Qgd (nC) 23 Configuration Single D D2PAK (TO-263) DESCRIPTION K Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The D2PAK is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible on-resistance in any existing surface mount package. The D2PAK is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0 W in a typical surface mount application. G D S G S N-Channel MOSFET ORDERING INFORMATION Package D2PAK (TO-263) D2PAK (TO-263) D2PAK (TO-263) Lead (Pb)-free and Halogen-free SiHF630S-GE3 SiHF630STRL-GE3a SiHF630STRR-GE3a IRF630SPbF IRF630STRLPbFa IRF630STRRPbFa SiHF630S-E3 SiHF630STL-E3a SiHF630STR-E3a Lead (Pb)-free Note a. See device orientation. ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 200 Gate-Source Voltage VGS ± 20 Continuous Drain Current VGS at 10 V TC = 25 °C TC = 100 °C Pulsed Drain Currenta ID IDM UNIT V 9.0 5.7 A 36 Linear Derating Factor 0.59 Linear Derating Factor (PCB Mount)e 0.025 W/°C Single Pulse Avalanche Energyb EAS 250 mJ Repetitive Avalanche Currenta IAR 9.0 A EAR 7.4 mJ Repetitive Avalanche Energya Maximum Power Dissipation TC = 25 °C Maximum Power Dissipation (PCB Mount)e TA = 25 °C PD 74 3.0 W * Pb containing terminations are not RoHS compliant, exemptions may apply Peak Diode Recovery dV/dtc Document Number: 91032 S11-1047-Rev. C, 30-May-11 dV/dt 5.0 V/ns www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF630S, SiHF630S Vishay Siliconix ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT TJ, Tstg - 55 to + 150 Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) UNIT °C 300d for 10 s Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = 50 V, starting TJ = 25 °C, L = 4.6 mH, Rg = 25 , IAS = 9.0 A (see fig. 12). c. ISD 9.0 A, dI/dt 120 A/μs, VDD VDS, TJ 150 °C. d. 1.6 mm from case. e. When mounted on 1" square PCB (FR-4 or G-10 material). . THERMAL RESISTANCE RATINGS PARAMETER SYMBOL MIN. TYP. MAX. Maximum Junction-to-Ambient (PCB Mount)c RthJA - - 40 Maximum Junction-to-Ambient RthJA - - 62 Maximum Junction-to-Case (Drain) RthJC - - 1.7 UNIT °C/W SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. VDS TYP. MAX. UNIT Static VGS = 0, ID = 250 μA 200 - - V VDS/TJ Reference to 25 °C, ID = 1 mA - 0.24 - V/°C VGS(th) VDS = VGS, ID = 250 μA 2.0 - 4.0 V Gate-Source Leakage IGSS VGS = ± 20 V - - ± 100 nA Zero Gate Voltage Drain Current IDSS VDS = 200 V, VGS = 0 V - - 25 VDS = 160V, VGS = 0 V, TJ = 125 °C - - 250 Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage Drain-Source On-State Resistance Forward Transconductance RDS(on) gfs ID = 5.4 Ab VGS = 10 V VDS = 50 V, ID = 5.4 Ab μA - - 0.40 3.8 - - S - 800 - - 240 - - 76 - - - 43 Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Turn-On Delay Time td(on) Rise Time Turn-Off Delay Time Fall Time tr td(off) VGS = 10 V ID = 5.9 A, VDS = 160 V see fig. 6 and 13b VDD = 100 V, ID = 5.9 A Rg = 12 , RD= 16 see fig. 10b tf Internal Drain Inductance LD Internal Source Inductance LS www.vishay.com 2 VGS = 0 V, VDS = 25 V, f = 1.0 MHz, see fig. 5 Between lead, 6 mm (0.25") from package and center of die contact D - - 7.0 - - 23 - 9.4 - - 28 - - 39 - - 20 - - 4.5 - - 7.5 - pF nC ns nH G S Document Number: 91032 S11-1047-Rev. C, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF630S, SiHF630S Vishay Siliconix SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. - - 9.0 UNIT Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulsed Diode Forward IS Currenta ISM MOSFET symbol showing the integral reverse p - n junction diode D A G S - - 36 VSD TJ = 25 °C, IS = 9.0 A, VGS = 0 Vb - - 2.0 V Body Diode Reverse Recovery Time trr - 170 340 ns Body Diode Reverse Recovery Charge Qrr TJ = 25 °C, IF = 5.9 A, dI/dt = 100 A/μsb - 1.1 2.2 μC Forward Turn-On Time ton Body Diode Voltage Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width 300 μs; duty cycle 2 %. c. When mounted on 1" square PCB (FR-4 or G-10 material). TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) VGS 15 V 10 V 8.0 V 7.0 V 6.0 V 5.5 V 5.0 V Bottom 4.5 V 101 100 4.5 V 91032_01 101 100 Fig. 1 - Typical Output Characteristics, TC = 25 °C Document Number: 91032 S11-1047-Rev. C, 30-May-11 10-1 10-1 101 VDS, Drain-to-Source Voltage (V) 4.5 V 100 20 µs Pulse Width TC = 25 °C 10-1 10-1 VGS 15 V 10 V 8.0 V 7.0 V 6.0 V 5.5 V 5.0 V Bottom 4.5 V Top ID, Drain Current (A) ID, Drain Current (A) Top 91032_02 20 µs Pulse Width TC = 150 °C 100 101 VDS, Drain-to-Source Voltage (V) Fig. 2 - Typical Output Characteristics, TC = 150 °C www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF630S, SiHF630S Vishay Siliconix 1600 Capacitance (pF) ID, Drain Current (A) 101 150 °C 25 °C 100 VGS = 0 V, f = 1 MHz Ciss = Cgs + Cgd, Cds Shorted Crss = Cgd Coss = Cds + Cgd 1200 Ciss 800 Coss 400 Crss 20 µs Pulse Width VDS = 50 V 10-1 4 5 6 7 8 9 VGS, Gate-to-Source Voltage (V) 91032_03 0 100 10 2.5 20 ID = 5.9 A VGS = 10 V 2.0 1.5 1.0 0.5 0.0 - 60 - 40 - 20 0 91032_04 ID = 5.9 A VDS = 160 V 16 VDS = 100 V VDS = 40 V 12 8 4 For test circuit see figure 13 0 20 40 60 80 100 120 140 160 TJ, Junction Temperature (°C) Fig. 4 - Normalized On-Resistance vs. Temperature www.vishay.com 4 Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage VGS, Gate-to-Source Voltage (V) RDS(on), Drain-to-Source On Resistance (Normalized) 3.0 VDS, Drain-to-Source Voltage (V) 91032_05 Fig. 3 - Typical Transfer Characteristics 101 0 91032_06 10 20 30 40 50 QG, Total Gate Charge (nC) Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Document Number: 91032 S11-1047-Rev. C, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF630S, SiHF630S Vishay Siliconix ISD, Reverse Drain Current (A) 10 ID, Drain Current (A) 101 150 °C 25 °C 100 8 6 4 2 VGS = 0 V 0.5 0.7 0.9 VSD, Source-to-Drain Voltage (V) 91032_07 0 1.5 1.3 1.1 25 50 VGS 5 150 RD D.U.T. Rg Operation in this area limited by RDS(on) 125 Fig. 9 - Maximum Drain Current vs. Case Temperature VDS 103 100 TC, Case Temperature (°C) 91032_09 Fig. 7 - Typical Source-Drain Diode Forward Voltage 75 + - VDD ID, Drain Current (A) 2 10 V 102 5 10 µs 2 10 100 µs Fig. 10a - Switching Time Test Circuit 5 1 ms 2 10 ms 1 5 VDS TC = 25 °C TJ = 150 °C Single Pulse 2 0.1 0.1 91032_08 Pulse width ≤ 1 µs Duty factor ≤ 0.1 % 2 5 1 2 5 10 2 90 % 5 102 2 5 103 2 5 VDS, Drain-to-Source Voltage (V) 104 10 % VGS td(on) Fig. 8 - Maximum Safe Operating Area Document Number: 91032 S11-1047-Rev. C, 30-May-11 tr td(off) tf Fig. 10b - Switching Time Waveforms www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF630S, SiHF630S Vishay Siliconix Thermal Response (ZthJC) 10 1 0 − 0.5 0.2 PDM 0.1 0.05 0.1 t1 0.02 0.01 t2 Single Pulse (Thermal Response) Notes: 1. Duty Factor, D = t1/t2 2. Peak Tj = PDM x ZthJC + TC 10-2 10-5 10-4 10-3 10-2 0.1 1 10 t1, Rectangular Pulse Duration (s) 91032_11 Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case L Vary tp to obtain required IAS VDS VDS tp VDD Rg D.U.T. + - IAS V DD VDS 10 V tp 0.01 Ω IAS Fig. 12a - Unclamped Inductive Test Circuit Fig. 12b - Unclamped Inductive Waveforms EAS, Single Pulse Energy (mJ) 600 ID 4.0 A 5.7 A Bottom 9.0 A Top 500 400 300 200 100 0 VDD = 50 V 25 91032_12c 50 75 100 125 150 Starting TJ, Junction Temperature (°C) Fig. 12c - Maximum Avalanche Energy vs. Drain Current www.vishay.com 6 Document Number: 91032 S11-1047-Rev. C, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF630S, SiHF630S Vishay Siliconix Current regulator Same type as D.U.T. 50 kΩ QG 10 V 0.2 µF 12 V 0.3 µF QGS + QGD D.U.T. VG - VDS VGS 3 mA Charge IG ID Current sampling resistors Fig. 13b - Gate Charge Test Circuit Fig. 13a - Basic Gate Charge Waveform Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + + - - Rg • • • • dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor “D” D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple ≤ 5 % ISD Note a. VGS = 5 V for logic level devices Fig. 14 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91032. Document Number: 91032 S11-1047-Rev. C, 30-May-11 www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix TO-263AB (HIGH VOLTAGE) A (Datum A) 3 A 4 4 L1 B A E c2 H Gauge plane 4 0° to 8° 5 D B Detail A Seating plane H 1 2 C 3 C L L3 L4 Detail “A” Rotated 90° CW scale 8:1 L2 B A1 B A 2 x b2 c 2xb E 0.010 M A M B ± 0.004 M B 2xe Plating 5 b1, b3 Base metal c1 (c) D1 4 5 (b, b2) Lead tip MILLIMETERS DIM. MIN. MAX. View A - A INCHES MIN. 4 E1 Section B - B and C - C Scale: none MILLIMETERS MAX. DIM. MIN. INCHES MAX. MIN. MAX. A 4.06 4.83 0.160 0.190 D1 6.86 - 0.270 - A1 0.00 0.25 0.000 0.010 E 9.65 10.67 0.380 0.420 6.22 - 0.245 - b 0.51 0.99 0.020 0.039 E1 b1 0.51 0.89 0.020 0.035 e b2 1.14 1.78 0.045 0.070 H 14.61 15.88 0.575 0.625 b3 1.14 1.73 0.045 0.068 L 1.78 2.79 0.070 0.110 2.54 BSC 0.100 BSC c 0.38 0.74 0.015 0.029 L1 - 1.65 - 0.066 c1 0.38 0.58 0.015 0.023 L2 - 1.78 - 0.070 c2 1.14 1.65 0.045 0.065 L3 D 8.38 9.65 0.330 0.380 L4 0.25 BSC 4.78 5.28 0.010 BSC 0.188 0.208 ECN: S-82110-Rev. A, 15-Sep-08 DWG: 5970 Notes 1. Dimensioning and tolerancing per ASME Y14.5M-1994. 2. Dimensions are shown in millimeters (inches). 3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body at datum A. 4. Thermal PAD contour optional within dimension E, L1, D1 and E1. 5. Dimension b1 and c1 apply to base metal only. 6. Datum A and B to be determined at datum plane H. 7. Outline conforms to JEDEC outline to TO-263AB. Document Number: 91364 Revision: 15-Sep-08 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000