ISOLATED DC/DC CONVERTERS 48V Input 12V/12A, 3.3V/45A, 5V/30A, 1.2V-2.5V/50A Outputs 07QB-C5T Series PRELIMINARY • Isolated • Output Over Voltage Shutdown • High Efficiency • OCP/SCP • High Power Density • Over Temperature Protection • Low Cost • Remote On/Off • Input Under Voltage Lockout • Output Voltage Trim • Fixed Frequency (330KHz) • Positive/Negative Remote Sense • Active Low/High (Option) Description The 07QB-C5T Series are isolated DC/DC converters that operate from a nominal 48V source. These units will provide up to 150W of output power from a nominal 48V input. These units are designed to be highly efficient and low cost. Typical efficiency of 12V output at 48V input at full load is 93%. Features include remote on/off, over current protection and under-voltage lockout. These converters are provided in an industry standard quarter brick package. Part Selection Output Voltage Input Voltage Max. Output Current Max. Output Power Typical Efficiency Model Number Active High Model Number Active Low 12V 48V 12A 144W 93% 07QB-C5T120 07QB-C5T12L 5.0V 48V 30A 150W 91% 07QB-C5T050 07QB-C5T05L 3.3V 48V 45A 150W 91% 07QB-C5T033 07QB-C5T03L 2.5V 48V 50A 125W 89% 07QB-C5T025 07QB-C5T02L 1.8V 48V 50A 120W 87% 07QB-C5TV80 07QB-C5TV8L 1.5V 48V 50A 75W 85% 07QB-C5TV50 07QB-C5TV5L 1.2V 48V 50A 60W 83% 07QB-C5TV20 07QB-C5TV2L Note: Add “G” suffix at the end of the model number to indicate Tray Packaging. Absolute Maximum Ratings Min Typ Max Input Voltage (continuous) Parameter -0.3V - 80V Remote On/Off -0.3V - 18V - - 2000V Ambient Temperature -40°C - 85°C Storage Temperature -55°C - 125°C I/O Isolation Voltage Notes Note: All specifications are typical at nominal input, full load at 25°C unless noted. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 12V/12A, 3.3V/45A, 5V/30A, 1.2V-2.5V/50A Outputs Input Specifications Parameter Input Voltage Input Current (full load) VO=12V VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V Input Current (no load) Min 36V Typ 48V Max 75V - 120mA 4.5A 4.9A 4.9A 4.1A 3.0A 2.6A 2.1A 180mA 10mA 15mA Remote Off Input Current Input Reflected Ripple Current (pk-pk) - 10mA 20mA Input Reflected Ripple Current (RMS) - 3mA 8mA - 0.05A s 0.1A s Turn-on Voltage Threshold 32V 34V 35V Turn-off Voltage Threshold 30V 32V 34V 2 I t Inrush Current Transient 2 Notes Tested with simulated source impedance of 10uH, 5Hz to 20MHz; use a 100uF/100V electrolytic capacitor with ESR = 1 ohm max. at 200KHz at 25°C. 2 Output Specifications Parameter Output Voltage Set Point Min Typ Max 11.820V 4.925V 3.250V 2.463V 1.773V 1.477V 1.182V 12V 5V 3.3V 2.5V 1.8V 1.5V 1.2V 12.180V 5.075V 3.350V 2.538V 1.827V 1.523V 1.218V VO=12V VO=5.0V VO=3.3V VO=1.2V-2.5V - ±12mV ±5mV ±3mV ±3mV ±24mV ±10mV ±7mV ±6mV VO=12V VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V - ±30mV ±10mV ±7mV ±6mV ±5mV ±4mV ±3mV ±60mV ±20mV ±15mV ±13mV ±9mV ±8mV ±6mV Regulation Over Temperature (-40°C to +85°C) VO=12V VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V - ±60mV ±45mV ±30mV ±25mV ±20mV ±20mV ±15mV ±100mV ±75mV ±50mV ±45mV ±40mV ±35mV ±30mV VO=12V VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V Line Regulation Load Regulation Notes Vin=48V, Io=50% full load Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 12V/12A, 3.3V/45A, 5V/30A, 1.2V-2.5V/50A Outputs Output Specifications (continued) Parameter Min Typ Max VO=12V VO=5.0V VO=3.3V VO=1.2V-2.5V 0A 0A 0A 0A - 12A 30A 45A 50A VO=12V VO=5.0V VO=3.3V VO=1.2V-2.5V 14A 36A 55A 58A 15.5A 43A 62A 63A 18A 50A 70A 70A - 3A s 5A s VO=12V VO=5.0V VO=3.3V VO=1.2V-2.5V - 30mV 25mV 20mV 15mV 50mV 50mV 40mV 30mV VO=12V VO=5.0V VO=3.3V VO=1.2V-2.5V - 100mV 100mV 55mV 40mV 150mV 150mV 100mV 80mV 20mS - 100mS - 0% 5% 0uF 0uF 0uF - 2200uF 10000uF 20000uF - 600mV 800mV - 200uS 300uS - 600mV 800mV Settling Time - 200uS 300uS Overshoot - 150mV 300mV Settling Time - 200uS 300uS - 150mV 300mV Settling Time - 200uS 300uS Overshoot - 100mV 200mV Settling Time - 200uS 300uS - 100mV 200mV - 200uS 300uS Notes Output Current Current Limit Threshold Short Circuit Surge Transient 2 2 Ripple and Noise (RMS) Ripple and Noise (pk-pk) Turn on Time Overshoot at Turn on Test conditions: 0-20MHz BW, with a 1uF ceramic capacitor and a 10uF Tantalum capacitor at the output. Output Capacitance VO=12.0V VO=5.0V VO=1.2V-3.3V Transient Response 50% ~ 75% Max Load 75% ~ 50% Max Load 50% ~ 75% Max Load 75% ~ 50% Max Load 50% ~ 75% Max Load 75% ~ 50% Max Load Overshoot Settling Time Overshoot Overshoot Overshoot Settling Time VO=12.0V VO=5.0V VO=1.2V-3.3V Test conditions: di/dt = 0.1A/uS, Vin=48V, with a 1uF ceramic capacitor and a 10uF Tantalum capacitor at the output. Note: All specifications are typical at nominal input, full load at 25°C unless noted. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 12V/12A, 3.3V/45A, 5V/30A, 1.2V-2.5V/50A Outputs General Specifications Parameter Min Typ Max Notes 90% 88% 88% 86% 84% 82% 80% 93% 91% 91% 89% 87% 85% 83% - Switching Frequency 280KHz 330KHz 380KHz Isolation capacitance - 1500pF - 80%Vo - 110%Vo - 125°C - 115%Vo 122%Vo 127%Vo Efficiency VO=12V VO=5.0V VO=3.3V VO=2.5V VO=1.8V VO=1.5V VO=1.2V Output Voltage Trim Range Over Temperature Protection Over Voltage Protection MTBF Vin=48V, full load , Ta=25°C Calculated Per Bell Core TR-332 (IO = Nominal; Ta = 25°C) TBD Dimensions Inches millimeters Weight 2.30 x 1.45 x 0.395 58.42 x 36.83 x 10.03 - 41g - Control Specifications Parameter Min Typ Max -0.3V - 0.8V 2.4V - 18V -0.3V - 0.8V Signal High (Unit On) 2.4V - 18V Current Sink 0mA - 0.75mA Notes Remote On/Off Signal Low (Unit On) Active Low Signal High (Unit Off) Signal Low (Unit Off) Active High 07QB-C5TxxL. The remote on/off pin open, Unit off. 07QB-C5Txx0. The remote on/off pin open, Unit on. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 12V/12A, 3.3V/45A, 5V/30A, 1.2V-2.5V/50A Outputs Output Trim Equations Equations for calculating the trim resistor are shown below (Unit: kΩ). The Trim Down resistor should be connected between the Trim pin and Ground pin. The Trim Up resistor should be connected between the Trim pin and the Vout. Only one of the resistors should be used for any given application. 1) For Vo=1.5V - 12V: Vout 511 Rtrimdown = − 10.22 delta Module Trim GND Rtrimup = (100 + delta ) ⋅Vo ⋅ 5.11 − 626 − 10.22 1.225 ⋅ delta Vout Module Notes: delta = Rtrimdown (Vo _ req − Vo) × 100[%] Trim Rtrimup GND Vo Vo_req=Desired (trimmed) output voltage [V]; Vo=output voltage Vo=12.006V for 12V output; Vo=5V for 5.0V output;; Vo=3.308V for 3.3V output; Vo=2.505V for 2.5V output; Vo=1.804V for 1.8V output; Vo=1.503V for 1.5V output 2) For Vo=1.2V: Rtrimdown = 511 − 10.22 delta Rtrimup = Notes: delta = (100 + delta ) ⋅Vo ⋅ 5.11 − 313 − 10.22 0.6125 ⋅ delta (Vo _ req − Vo) ×100[%] Vo Vo_req=Desired (trimmed) output voltage [V]; Vo=output voltage Vo=1.202V for 1.2V output Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 12V/12A, 3.3V/45A, 5V/30A, 1.2V-2.5V/50A Outputs Efficiency Data EFFICIENCY 95% 90% 36V 48V 75V 85% 80% 75% 70% 5 11 23 34 45 OUTPUT CURRENT (A) 07QB-C5T03x EFFICIENCY 95% 90% 36V 48V 75V 85% 80% 75% 70% 1 3 6 9 12 OUTPUT CURRENT (A) 07QB-C5T12x Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 12V/12A, 3.3V/45A, 5V/30A, 1.2V-2.5V/50A Outputs Thermal Derating Curves 07QB-C5T03x 07QB-C5T12x Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 12V/12A, 3.3V/45A, 5V/30A, 1.2V-2.5V/50A Outputs Pin Connections Pin 1 Function Vin (+) Pin Size 0.04" 2 Remote On/Off 0.04" 3 Vin (-) 0.04" 4 Vout (-) 0.062" 5 Remote Sense (-) 0.04" 6 Trim 0.04" 7 Remote Sense (+) 0.04" 8 Vout (+) 0.062" 2005 Bel Fuse Inc. Specifications subject to change without notice. 030405 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com