Thumbwheel Switch A7AS Easy-to-Assemble Thumbwheel Switch Dustproof construction ensures highly reliable performance at low voltage and very small current even under adverse environmental conditions ■ Switch units can be assembled simply by fitting the integral hook coupler of each unit into the mating unit, thus eliminating the need of bolts and nuts for assembly ■ Ordering Information ■ SWITCH UNITS Part Number Front mounting solder terminals Light gray case Black case A7AS-203 A7AS-203-1 A7AS-206 A7AS-206-1 A7AS-206-PM A7AS-206-PM-1 A7AS-207 A7AS-207-1 A7AS-219 A7AS-219-1 A7AS-222 A7AS-222-1 Output Code 03 (decimal code) 06 (binary code) (binary code w/+, – display) 07 (binary code w/diode provision) 19 (decimal code w/diode provision) 22 (compliment of BCD) ■ ACCESSORIES Accessory End Cap Spacer Connector Solder terminal PC terminal Part Number For front mounting type switch assembly terminals Light gray Black A7AS-M A7AS-M-1 NRT-P■ ■ NRT-P■ ■ -1 NRT-C NRT-C NRT-CP NRT-CP Note: 1. When placing your order, please specify the model numbers and quantities of required switch units, end caps, and spacers, respectively. (Note that switch units and accessories are not factory-assembled for shipment.) 2. Switch case, end cap, and spacer are made of polyacetal resin. 3. One of the following alphabetic codes must be filled into the boxed part of the model number to specify a legend to be hot stamped on the required spacer. 4. End caps come as a set -- left and right. Code A B C D E F G Legend Hot stamp not required SEC MIN H g kg mm Code H J K L Q Legend cm m ºC PCS x 10 SEC T 0 A7AS A7AS Characteristics Switching capacity Carry current Contact resistance Insulation resistance Dielectric strength Operating force Vibration Shock Ambient temperature Humidity Service life Operating Storage Mechanical Electrical Weight (per unit) 1 mA to 0.1 A 50 VAC/28 VDC (resistive load) 1 A (max.) 200 mΩ max. 10 MΩ min. (at 500 VDC) between nonconnected terminals 1,000 MΩ min. (at 500 VDC) between each terminal and noncurrent-carrying part 600 VAC, 50/60 Hz for 1 minute between nonconnected terminals 1,000 VAC, 50/60 Hz for 1 minute between each terminal and noncurrent-carrying part 400 g max. 10 to 55 Hz, 1.5 mm double amplitude 500 m/s2 (approx. 50 G) -40o to 85oC -40o to 85oC 85% RH max. 1,000,000 operations (steps) min. 50,000 operations (steps) min. Approx. 7.6 g Note: Data shown are of initial value. Dimensions Unit: mm (inch) ■ SWITCH UNITS A7AS-203(-1), A7AS-206(-1) A7AS-207(-1), A7AS-219(-1) A7AS-222(-1) No. of units (n) 1 2 3 4 5 6 7 Panel cutout 8 9 10 Note: A (8n + 11) 19 (0.75) 27 (1.06) 35 (1.38) 43 (1.69) 51 ± 0.8 (2 ± 0.03) 59 ± 0.8 (2.32 ± 0.03) 67 ± 0.8 (2.64 ± 0.03) 75 ± 0.8 (2.95 ± 0.03) 83 ± 0.8 (3.27 ± 0.03) 91 ± 0.8 (3.58 ± 0.03) B (8n + 8) 16 (0.63) 24 (0.94) 32 (1.26) 40 (1.57) 48 ± 0.8 (1.89 ± 0.03) 56 ± 0.8 (2.20 ± 0.03) 64 ± 0.8 (2.52 ± 0.03) 72 ± 0.8 (2.83 ± 0.03) 80 ± 0.8 (3.15) 88 ± 0.8 (3.46 ± 0.03) Dimension * is 41.5 (1.63) for the switch with output code “03” or “06,” and 53.5 (2.11) for the switch with output code “07” or “19.” Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. Each model number applies to a single switch unit and not to the switch assembly as shown in the drawings. 2 C (B + 1) 17 (0.67) 25 (0.98) 33 (1.30) 41 (1.66) 49 (1.93) 57 (2.24) 65 (2.56) 73 (2.87) 81 (3.19) 89 (3.50) A7AS A7AS ■ END CAPS A7AS-M, A7AS-M-1 [right] [left] ■ SPACERS NRT-P■ ■ , NRT-P■ ■ -1 ■ CONNECTORS NRT-C NRT-CP Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. End caps are attached to each end of the switch assembly and used to secure the switch assembly to a mounting panel. 3 A7AS A7AS Unit: mm (inch) ■ TERMINALS A7AS-203-■ ■ A7AS-206-■ ■ A7AS-207-■ ■ A7AS-219-■ ■ Hints on Correct Use Refer to HINTS ON CORRECT USE under the General Information section. OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OM RON 416-286-6465 Cat. No. GC SW5 4 4/98 Specifications subject to change without notice. Printed in the U.S.A.