5.0X6.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA5060SYC/J Features Description z SINGLE SUPER BRIGHT YELLOW COLOR. z SUITABLE The Super Bright device is based on light emitting diode chip FOR ALL SMT ASSEMBLY AND SOLDER made from AlInGaP. PROCESS. z AVAILABLE z IDEAL z PACKAGE : 500PCS / REEL. z MOISTURE z RoHS ON TAPE AND REEL. FOR BACKLIGHTING. SENSITIVITY LEVEL : LEVEL 4. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG3567 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 1 OF 5 ERP:1201003065 Selection Guide Dice Part No. AA5060SYC/J Iv (mcd) [2] @ 50mA Lens Type SUPER BRIGHT YELLOW (AlInGaP) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 650 1300 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 589 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.3 2.8 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 140 mW DC Forward Current 50 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG3567 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 2 OF 5 ERP:1201003065 Super Bright Yellow SPEC NO: DSAG3567 APPROVED: WYNEC AA5060SYC/J REV NO: V.3 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 3 OF 5 ERP:1201003065 AA5060SYC/J Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG3567 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 4 OF 5 ERP:1201003065 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG3567 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu AA5060SYC/J DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 5 OF 5 ERP:1201003065