Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTFF374S/374.0/TO39-2 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter in a low-profile metal TO-39 case for Wireless LAN applications. 1. Package Dimension (TO-39) 2, Pin Configuration 1 Input / Output 2 Output / Input 3 Case Ground Dimension Data (unit: mm) A 9.30±0.20 B 5.08±0.10 C 3.40±0.20 D 3±0.20 ⁄ 5±0.20 E 0.45±0.20 3. Matching network (Element values may depend on PCB layout) 50Ω unbalanced: In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 250Ω balanced: 200Ω balanced: 4. Typical Response Wide band In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] Narrow band Delay Ripple In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5. Performance 5-1. Maximum Ratings Rating Value Unit Source Power PS 10 dBm DC Voltage VDC 0 V Storage Temperature Range Tstg -40 to +85 °C Operating Temperature Range TA -10 to +65 °C 5-2. Electronic Characteristics Terminating source impedance: Terminating load impedance: ZS = 50Ω unbalanced and matching network ZL = 50Ω unbalanced and matching network Characteristics Minimum Typical Maximum Unit -- 374.000 -- MHz -- 8.5 10.0 dB Centre frequency fC Insertion loss (including matching network) IL 3dB Bandwidth BW3 17 22 -- MHz Amplitude ripple (p-p) f C±7MHz Δα -- 0.5 1.0 dB Group delay ripple (p-p) f C±7MHz Δτ -- 40 100 ns 30 40 -- dB 30 40 48 20 30 38 40 42 45 52 38 42 44 45 -------- dB dB dB dB dB dB dB -- -87 -- ppm/K Triple transit suppression Relative attenuation (relative to IL) 357.5 ~ 352.0 MHz 352.0 ~ 341.0 MHz 341.0 ~ 224.0 MHz 390.5 ~ 392.0 MHz 392.0 ~ 396.0 MHz 396.0 ~ 422.0 MHz 422.0 ~ 454.0 MHz αrel Temperature coefficient of frequency TCf In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 1 C1 Date : SEPT 04