Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] This specification covers the characteristics of SAW Filter ACTF474/374.0/QCC8C, in a QCC8C package and is designed for use in wireless LAN applications. 1.Package Dimension (QCC8C) Pins Configuration 2 Input Ground 3 Input 6 Output Ground 7 Output 1,5 To be Grounded 4,8 Case Ground Sign Data (unit: mm) Sign Data (unit: mm) A 2.08 E 1.20 B 0.60 F 1.35 C 1.27 G 5.00 D 2.54 H 5.00 3. Matching Network (50 Ω unbalanced) In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 1 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 4.Typical Frequency Response 5.Performance 5-1. Maximum Ratings Value Units Source Power Rating PS 10 dBm DC Voltage VDC 0 V -40 to +85 °C +235 °C Storage Temperature Soldering Temperature In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5-2. Electronic Characteristics Operating temperature: Terminating source impedance: Terminating load impedance: TA = -10 … +80 °C ZS = 50 Ω unbalanced and matching network ZL = 50 Ω unbalanced and matching network Characteristics Centre Frequency fC Minimum insertion attenuation (including matching network) α Bandwidth αrel ≤3 dB min BW 3dB Minimum Typical Maximum Units -- 374.000 -- MHz -- 9.0 10.5 dB 17 22 -- MHz Amplitude ripple (p-p) f C±7MHz Δ α -- 0.5 1.0 dB Group delay ripple (p-p) f C±7MHz Δτ -- 40 100 ns 30 40 -- dB 30 40 48 20 30 38 40 42 45 52 38 42 44 45 -------- dB dB dB dB dB dB dB -- -87 -- ppm/K Triple transit suppression Relative attenuation (relative to αmin) 357.5 ~ 352.0 MHz 352.0 ~ 341.0 MHz 341.0 ~ 224.0 MHz 390.5 ~ 392.0 MHz 392.0 ~ 396.0 MHz 396.0 ~ 422.0 MHz 422.0 ~ 454.0 MHz Temperature coefficient of frequency αrel T Cf iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 3 OF 3 Issue : 1 C1 Date : SEPT 04