AD AD8663ARZ1

Low Noise, Precision, 16 V, CMOS,
Rail-to-Rail Operational Amplifiers
AD8663/AD8667/AD8669
PIN CONFIGURATIONS
NC 1
–IN 2
AD8663
AD8663
8
NC
NC 1
7
V+
–IN 2
7 V+
+IN 3
6 OUT
TOP VIEW
+IN 3 (Not to Scale) 6 OUT
5 NC
V– 4
NC = NO CONNECT
8 NC
5 NC
V– 4
06742-002
Low offset voltage: 175 μV maximum @ VSY = 5 V
Low supply current: 275 μA maximum per amplifier
Single-supply operation: 5 V to 16 V
Low noise: 23 nV/√Hz
Low input bias current: 300 fA
Unity-gain stable
Small packages available
3 mm × 3 mm, 8-lead LFCSP
8-lead MSOP
06742-001
FEATURES
NC = NO CONNECT
Figure 1. 8-Lead SOIC (R-8)
Figure 2. 8-Lead LFCSP (CP-8-2)
+IN A 3
V– 4
1
14
OUT D
2
13
–IN D
12
+IN D
8
V+
AD8667
7
+IN A
3
TOP VIEW
(Not to Scale)
OUT B
6
–IN B
V+
4
5
+IN B
OUT A 1
–IN A 2
OUT A
–IN A
Figure 3. 8-Lead MSOP (RM-8),
8-Lead SOIC (R-8)
06742-003
Sensor front ends
Transimpedance amps
Electrometer applications
Photodiode amplification
Low power ADC drivers
Medical diagnostic instruments
pH and ORP meters and probes
DAC or REF buffers
AD8648
AD8669
+IN B
TOP VIEW
11 V–
(Not to Scale)
5
10 +IN C
–IN B
6
9
–IN C
OUT B
7
8
OUT C
06742-004
APPLICATIONS
Figure 4. 14-Lead SOIC (R-14)
GENERAL DESCRIPTION
The AD866x are rail-to-rail output amplifiers that use the
Analog Devices, Inc., patented DigiTrim® trimming technique
to achieve low offset voltage. The AD866x feature an extended
operating range with supply voltages up to 16 V. They also
feature low input bias current, low input offset voltage, and low
current noise.
The combination of low offset, very low input bias current, and
a wide supply range makes these amplifiers useful in a wide
variety of applications usually associated with higher priced
JFET amplifiers. Systems using high impedance sensors, such as
photodiodes, benefit from the combination of low input bias
current, low noise, low offset, and wide bandwidth.
The ability to operate the device for single (5 V to 16 V) or dual
supplies (±2.5 V to ±8 V) supports many applications. The railto-rail outputs provide increased dynamic range to drive low
frequency data converters. The low bias current drift is well
suited for precision I-to-V converters. The combination of
precision offset, offset drift, and low noise also make the op
amps ideal for gain, dc offset adjust, and active filter in both
instrumentation and medical applications. These low power
op amps can be used in IR thermometers, pH and ORP instruments, pressure transducer front ends, and other sensor signal
conditioning circuits that are used in remote or wireless
applications.
The AD8663/AD8667/AD8669 are specified over the extended
industrial temperature range of −40°C to +125°C. The single
AD8663 is available in a narrow 8-lead SOIC package and a very
thin, 8-lead LFCSP. The dual AD8667 is available in a narrow
8-lead SOIC package and an 8-lead MSOP. The quad AD8669 is
available in a 14-lead SOIC package.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2007 Analog Devices, Inc. All rights reserved.
AD8663/AD8667/AD8669
TABLE OF CONTENTS
Features .............................................................................................. 1
Absolute Maximum Ratings ............................................................5
Applications....................................................................................... 1
Thermal Resistance .......................................................................5
Pin Configurations ........................................................................... 1
ESD Caution...................................................................................5
General Description ......................................................................... 1
Typical Performance Characteristics ..............................................6
Revision History ............................................................................... 2
Outline Dimensions ....................................................................... 13
Specifications..................................................................................... 3
Ordering Guide .......................................................................... 15
AD8663/AD8667/AD8669 Electrical Characteristics............. 3
REVISION HISTORY
10/07—Rev. 0 to Rev. A
Added AD8667 and AD8669 ............................................Universal
Changes to Features.......................................................................... 1
Changes to General Description .................................................... 1
Inserted Figure 3 and Figure 4 ........................................................ 1
Changes to Table 1, Power Supply Section.................................... 3
Changes to Table 2............................................................................ 4
Reformatted Typical Performance Characteristics Section ........ 6
Changes to Figure 5.......................................................................... 6
Changes to Figure 13........................................................................ 7
Changes to Figure 17 and Figure 20............................................... 8
Inserted Figure 35 Through Figure 39......................................... 11
Inserted Figure 40 and Figure 41.................................................. 12
Updated Outline Dimensions ....................................................... 13
Changes to Ordering Guide .......................................................... 15
7/07—Revision 0: Initial Version
Rev. A | Page 2 of 16
AD8663/AD8667/AD8669
SPECIFICATIONS
AD8663/AD8667/AD8669 ELECTRICAL CHARACTERISTICS
VSY = 5.0 V, VCM = VSY/2, TA = 25°C, unless otherwise noted.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Input Bias Current
Symbol
Conditions
VOS
VCM = VSY/2
−40°C < TA < +125°C
Min
IB
Typ
Max
Unit
30
175
450
μV
μV
pA
pA
pA
pA
pA
pA
V
dB
dB
dB
dB
μV/°C
0.3
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Offset Current
45
105
IOS
0.2
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Voltage Range
Common-Mode Rejection Ratio
CMRR
Large Signal Voltage Gain
AVO
Offset Voltage Drift
OUTPUT CHARACTERISTICS
Output Voltage High
TCVOS
VOH
Output Voltage High
VOH
Output Voltage Low
VOL
Output Voltage Low
VOL
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Gain Bandwidth Product
Phase Margin
NOISE PERFORMANCE
Peak-to-Peak Noise
Voltage Noise Density
Current Noise Density
ISC
ZOUT
PSRR
ISY
VCM = 0.2 V to 3.0 V
−40°C < TA < +125°C
RL = 100 kΩ, VOUT = 0.5 V to 4.5 V
RL = 2 kΩ, VOUT = 0.5 V to 4.5 V
−40°C < TA < +125°C
IL = 100 μA
−40°C < TA < +125°C
IL = 1 mA
−40°C < TA < +125°C
IL = 100 μA
−40°C < TA < +125°C
IL = 1 mA
−40°C < TA < +125°C
0.2
76
76
115
106
4.95
4.90
4.65
4.60
100
100
140
114
1.5
5
4.97
4.80
17
150
25
35
200
250
±7
120
f = 100 kHz, AV = 1
VSY = 5 V to 16 V
−40°C < TA < +125°C
VOUT = VSY/2
−40°C < TA < +125°C
35
65
3.0
95
95
105
210
275
325
V
V
V
V
mV
mV
mV
mV
mA
Ω
dB
dB
μA
μA
SR
GBP
ΦM
RL = 2 kΩ
CL = 20 pF
CL = 20 pF
0.26
520
60
V/μs
kHz
Degrees
en p-p
en
f = 0.1 Hz to 10 Hz
f = 1 kHz
f = 10 kHz
f = 1 kHz
2.5
23
21
0.05
μV p-p
nV/√Hz
nV/√Hz
pA/√Hz
in
Rev. A | Page 3 of 16
AD8663/AD8667/AD8669
VSY = 16.0 V, VCM = VSY/2, TA = 25°C, unless otherwise noted.
Table 2.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Input Bias Current
Symbol
Conditions
VOS
VCM = VSY/2
−40°C < TA < +125°C
Min
IB
Typ
Max
Unit
40
300
500
μV
μV
pA
pA
pA
pA
pA
pA
V
dB
dB
dB
dB
μV/°C
0.3
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Offset Current
45
120
IOS
0.2
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Voltage Range
Common-Mode Rejection Ratio
CMRR
Large Signal Voltage Gain
AVO
Offset Voltage Drift
OUTPUT CHARACTERISTICS
Output Voltage High
TCVOS
VOH
Output Voltage High
VOH
Output Voltage Low
VOL
Output Voltage Low
VOL
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Gain Bandwidth Product
Phase Margin
NOISE PERFORMANCE
Peak-to-Peak Noise
Voltage Noise Density
Current Noise Density
ISC
ZOUT
PSRR
ISY
VCM = 0.2 V to 14.5 V
−40°C < TA < +125°C
RL = 100 kΩ, VOUT = 0.5 V to 15.5 V
RL = 2 kΩ, VOUT = 0.5 V to 15.5 V
−40°C < TA < +125°C
IL = 100 μA
−40°C < TA < +125°C
IL = 1 mA
−40°C < TA < +125°C
IL = 100 μA
−40°C < TA < +125°C
IL = 1 mA
−40°C < TA < +125°C
0.2
87
87
115
106
15.95
15.90
15.85
15.80
109
109
140
111
1.5
5
15.98
15.92
17
70
25
35
100
125
±50
100
f = 100 kHz, AV = 1
VSY = 5 V to 16 V
−40°C < TA < +125°C
VOUT = VSY/2
−40°C < TA < +125°C
35
65
14.5
95
95
105
230
285
355
V
V
V
V
mV
mV
mV
mV
mA
Ω
dB
dB
μA
μA
SR
GBP
ΦM
RL = 2 kΩ
CL = 20 pF
CL = 20 pF
0.3
540
64
V/μs
kHz
Degrees
en p-p
en
f = 0.1 Hz to 10 Hz
f = 1 kHz
f = 10 kHz
f = 1 kHz
2.5
23
21
0.05
μV p-p
nV/√Hz
nV/√Hz
pA/√Hz
in
Rev. A | Page 4 of 16
AD8663/AD8667/AD8669
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 3.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature, Soldering (60 sec)
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Rating
18 V
−0.1 V to VSY
18 V
Indefinite
−60°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
Table 4. Thermal Resistance
Package Type
8-Lead SOIC (R-8)
8-Lead LFCSP (CP-8-2)
8-Lead MSOP (RM-8)
14-Lead SOIC (R-14)
1
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
θJA
121
751
145
90
Exposed pad soldered to application board.
ESD CAUTION
Rev. A | Page 5 of 16
θJC
43
181
45
45
Unit
°C/W
°C/W
°C/W
°C/W
AD8663/AD8667/AD8669
TYPICAL PERFORMANCE CHARACTERISTICS
10000
1600
VSY = 5V
–0.1V < VCM < +3.5V
TA = 25°C
VSY = 16V
–0.1V < VCM < +14V
TA = 25°C
9000
8000
1200
NUMBER OF SAMPLES
NUMBER OF AMPLIFIERS
1400
1000
800
600
400
7000
6000
5000
4000
3000
2000
200
0
50
VOS (µV)
100
150
200
250
0
–250 –200 –150 –100 –50
06742-005
–50
30
25
20
15
10
200
250
30
25
20
15
10
0
1
2
3
TCVOS (µV)
4
5
0
06742-006
0
0
1
2
3
TCVOS (µV/°C)
4
5
06742-038
5
5
Figure 9. Offset Voltage Drift Distribution
Figure 6. Offset Voltage Drift Distribution
300
500
VSY = 5V
400 TA = 25°C
VSY = 16V
TA = 25°C
250
200
300
150
200
100
VOS (µV)
100
0
–100
50
0
–50
–100
–200
–150
–300
–200
–400
–250
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
VCM (V)
5.0
–300
0
2
4
6
8
10
12
14
VCM (V)
Figure 7. Input Offset Voltage vs. Common-Mode Voltage
Figure 10. Input Offset Voltage vs. Common-Mode Voltage
Rev. A | Page 6 of 16
16
06742-010
–500
06742-007
VOS (µV)
150
VSY = ±8V
–40°C < TA < +125°C
35
NUMBER OF AMPLITUDES
NUMBER OF AMPLIFIERS
40
VSY = ±2.5V
–40°C < TA < +125°C
35
100
Figure 8. Input Offset Voltage Distribution
Figure 5. Input Offset Voltage Distribution
40
0
50
VOS (µV)
06742-037
1000
0
–250 –200 –150 –100
AD8663/AD8667/AD8669
100
100
VSY = 5V
TA = 125°C
VSY = 16V
TA = 125°C
80
60
60
40
40
20
20
1.0
1.5
2.0
2.5
3.0
3.5
4.5
4.0
VCM (V)
0
0.5
06742-013
0
0.5
6.5
8.5
10.5
12.5
14.5
Figure 14. Input Bias Current vs. Common-Mode Voltage at 125°C
100
VSY = 5V
TA = 25°C
80
70
70
CMRR (dB)
80
60
50
60
50
40
40
30
30
1k
10k
100k
1M
10M
FREQUENCY (Hz)
20
100
06742-023
20
100
VSY = 16V
TA = 25°C
90
1k
Figure 12. CMRR vs. Frequency, VSY = 5 V
10000
VSY = 5V
TA = 25°C
1000
100
VSY – VOH SOURCING
VOL SINKING
10
0.01
0.1
1
LOAD CURRENT (mA)
10
06742-011
1
0.1
0.001
100k
1M
10M
Figure 15. CMRR vs. Frequency, VSY = 16 V
OUTPUT SATURATION VOLTAGE (mV)
10000
10k
FREQUENCY (Hz)
Figure 13. Output Swing Saturation Voltage vs. Load Current
VSY = 16V
TA = 25°C
1000
100
VSY – VOH SOURCING
VOL SINKING
10
1
0.1
0.001
0.01
0.1
1
10
100
LOAD CURRENT (mA)
Figure 16. Output Swing Saturation Voltage vs. Load Current
Rev. A | Page 7 of 16
06742-014
90
06742-039
100
OUTPUT SATURATION VOLTAGE (mV)
4.5
VCM (V)
Figure 11. Input Bias Current vs. Common-Mode Voltage at 125°C
CMRR (dB)
2.5
06742-016
IB (pA)
IB (pA)
80
AD8663/AD8667/AD8669
350
140
120
DROP OUT VOLTAGE (mV)
250
200
VOL @ 1mA
150
100
VOL @ 100µA
–25
–10
5
20
35
50
65
80
95
80
VOL @ 1mA
60
40
110
125
TEMPERATURE (°C)
GAIN (dB) AND PHASE (Degrees)
100
PHASE
60
CL = 0pF
20
0
–20
–40
CL = 200pF
10k
100k
1M
10M
FREQUENCY (Hz)
G = 100
80
95
110
125
PHASE
60
40
CL = 0pF
GAIN
20
0
–20
–40
CL = 200pF
10k
100k
1M
10M
VSY = 16V
TA = 25°C
G = 100
40
G = 10
G=1
–20
–40
100
65
G = 10
20
G=1
0
–20
1k
10k
100k
1M
FREQUENCY (Hz)
10M
Figure 19. Closed-Loop Gain vs. Frequency
–40
100
1k
10k
100k
1M
FREQUENCY (Hz)
Figure 22. Closed-Loop Gain vs. Frequency, VSY = 16 V
Rev. A | Page 8 of 16
10M
06742-021
0
50
60
VSY = 5V
TA = 25°C
ACL (dB)
20
35
Figure 21. Open-Loop Gain and Phase Shift vs. Frequency
06742-018
ACL (dB)
40
20
FREQUENCY (Hz)
Figure 18. Open-Loop Gain and Phase Shift vs. Frequency
60
5
80
–60 VSY = 16V
TA = 25°C
–80
1k
100
06742-017
GAIN (dB) AND PHASE (Degrees)
100
–60 VSY = 5V
TA = 25°C
–80
1k
100
–10
Figure 20. Output Voltage Saturation vs. Temperature
120
GAIN
–25
TEMPERATURE (°C)
120
40
VSY – VOH @ 100µA
0
–40
Figure 17. Output Voltage Saturation vs. Temperature
80
VOL @ 100µA
20
VSY – VOH @ 100µA
0
–40
VSY – VOH @ 1mA
100
06742-020
50
06742-044
DROP OUT VOLTAGE (mV)
VSY – VOH @ 1mA
06742-045
300
AD8663/AD8667/AD8669
1000
1000
G = –100
100
G = –100
100
G = –10
10
10
1
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 23. Closed-Loop Output Impedance vs. Frequency, VSY = 5 V
90
50
PSRR (dB)
60
50
40
PSSR+
10
10
0
PSSR–
0
PSSR–
1M
10M
–20
100
06742-024
100k
PSSR+
–10
FREQUENCY (Hz)
1k
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 24. PSRR vs. Frequency, VSY = 5 V
Figure 27. PSRR vs. Frequency, VSY = 16 V
80
80
VSY = 5V
TA = 25°C
70
VSY = 16V
TA = 25°C
60
OS–
50
40
OS+
30
40
30
OS–
20
20
10
10
CAPACITANCE (pF)
1k
0
10
06742-025
100
OS+
50
100
CAPACITANCE (pF)
Figure 25. Small-Signal Overshoot vs. Load Capacitance, VSY = 5 V
1k
06742-028
OVERSHOOT (%)
60
OVERSHOOT (%)
VSY = 16V
TA = 25°C
30
20
10k
10M
40
20
1k
1M
80
60
–10
100k
90
70
0
10
10k
Figure 26. Closed-Loop Output Impedance vs. Frequency, VSY = 16 V
70
30
1k
FREQUENCY (Hz)
VSY = 5V
TA = 25°C
80
PSRR (dB)
0.1
100
06742-027
1k
06742-040
0.1
100
06742-041
1
70
VSY = 16V
TA = 25°C
G=1
ZOUT (Ω)
ZOUT (Ω)
G=1
–20
100
G = –10
VSY = 5V
TA = 25°C
Figure 28. Small-Signal Overshoot vs. Load Capacitance, VSY = 16 V
Rev. A | Page 9 of 16
AD8663/AD8667/AD8669
06742-029
VSY = ±2.5V
AV = 1
CL = 200pF
RL = 2kΩ
TIME (10µs/DIV)
06742-032
VOLTAGE (2V/DIV)
VOLTAGE (200mV/DIV)
VSY = ±8V
AV = 1
CL = 200pF
RL = 2kΩ
TIME (20µs/DIV)
Figure 29. Large Signal Transient Response, VSY = ±2.5 V
Figure 32. Large Signal Transient Response, VSY = ±8 V
VSY = ±2.5V
AV = 1
CL = 200pF
RL = 10kΩ
TIME (2µs/DIV)
06742-033
06742-030
VOLTAGE (50mV/DIV)
VOLTAGE (50mV/DIV)
VSY = ±8V
AV = 1
CL = 200pF
RL = 10kΩ
TIME (2µs/DIV)
Figure 30. Small Signal Transient Response, VSY = ±2.5 V
Figure 33. Small Signal Transient Response, VSY = ±8 V
300
1200
TA = +125°C
TA = +25°C
ISY (µA)
TA = –40°C
150
TA = +25°C
600
100
400
50
200
0
0
2
4
6
8
10
12
TA = +85°C
800
14
VSY (V)
16
06742-042
ISY (µA)
200
TA = +125°C
1000
TA = +85°C
Figure 31. Supply Current vs. Supply Voltage AD8663
TA = –40°C
0
0
2
4
6
8
10
12
14
VSY (V)
Figure 34. Supply Current vs. Supply Voltage AD8669
Rev. A | Page 10 of 16
16
06742-043
250
AD8663/AD8667/AD8669
1000
600
+85°C
500
+25°C
450
400
100
–40°C
eN (nV/ Hz)
ISY (µA)
VSY = ±2.5V AND ±8V
TA = 25°C
+125°C
550
350
300
250
200
10
150
100
4
6
8
VSY (V)
10
12
14
16
1
3.5
3.0
2.5
2.0
1.5
0
1.0
–0.05
0.5
0
–0.5
–0.10
–1.0
–1.5
OUTPUT VOLTAGE
–0.15
–2.0
–2.5
–3.0
–0.20
–0.25
INPUT VOLTAGE
0.05
17
0
12
–0.05
7
–0.10
2
–3
–0.15
–8
–0.20
–0.25
Figure 36. Positive Overload Recovery
–13
TIME (20µs/DIV)
Figure 39. Positive Overload Recovery
7.0
0.05
22
OUTPUT VOLTAGE
–3.5
TIME (20µs/DIV)
VSY = ±8V
AV = –100
TA = 25°C
0.10
INPUT VOLTAGE (50mV/DIV)
0.05
10000
27
0.15
OUTPUT VOLTAGE (1V/DIV)
INPUT VOLTAGE
1000
4.0
06742-049
INPUT VOLTAGE (50mV/DIV)
0.10
100
Figure 38. Voltage Noise Density
4.5
VSY = ±2.5V
AV = –100
TA = 25°C
10
FREQUENCY (Hz)
Figure 35. Supply Current vs. Supply Voltage AD8667
0.15
1
OUTPUT VOLTAGE (5V/DIV)
2
06742-046
0
06742-031
0
06742-034
50
35
0.05
6.5
4.0
3.5
–0.15
–0.20
3.0
2.5
2.0
–0.25
1.5
1.0
OUTPUT VOLTAGE
–0.30
–0.35
TIME (20µs/DIV)
0.5
0
–0.5
–1.0
VSY = ±8V
AV = –100
TA = 25°C
–0.05
25
–0.10
20
–0.15
15
–0.20
10
5
–0.25
OUTPUT VOLTAGE (5V/DIV)
–0.10
INPUT VOLTAGE
OUTPUT VOLTAGE
0
–0.30
–0.35
Figure 37. Negative Overload Recovery
TIME (20µs/DIV)
Figure 40. Negative Overload Recovery
Rev. A | Page 11 of 16
–5
06742-048
VSY = ±2.5V
AV = –100
TA = 25°C
INPUT VOLTAGE (50mV/DIV)
INPUT VOLTAGE
30
0
OUTPUT VOLTAGE (1V/DIV)
–0.05
6.0
5.5
5.0
4.5
06742-050
INPUT VOLTAGE (50mV/DIV)
0
AD8663/AD8667/AD8669
0
0
VSY = ±2.5V
TA = 25°C
20kΩ
–40
–60
–80
–100
–120
2kΩ
–40
–60
–80
–100
–120
–140
1k
10k
FREQUENCY (Hz)
100k
Figure 41. Channel Separation vs. Frequency
–160
100
1k
10k
FREQUENCY (Hz)
Figure 42. Channel Separation vs. Frequency
Rev. A | Page 12 of 16
100k
06742-047
–140
–160
100
VSY = ±8V
TA = 25°C
20kΩ
–20
CHANNEL SEPARATION (dB)
2kΩ
06742-051
CHANNEL SEPARATION (dB)
–20
AD8663/AD8667/AD8669
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
8
4.00 (0.1574)
3.80 (0.1497)
1
5
4
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0040)
COPLANARITY
0.10
SEATING
PLANE
6.20 (0.2441)
5.80 (0.2284)
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
0.31 (0.0122)
0.50 (0.0196)
0.25 (0.0099)
45°
8°
0°
1.27 (0.0500)
0.40 (0.0157)
0.25 (0.0098)
0.17 (0.0067)
012407-A
COMPLIANT TO JEDEC STANDARDS MS-012-A A
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 43. 8-Lead Small Outline Package [SOIC_N]
Narrow Body
(R-8)
Dimensions shown in millimeters and (inches)
3.25
3.00 SQ
2.75
0.60 MAX
5
TOP
VIEW
PIN 1
INDICATOR
2.95
2.75 SQ
2.55
8
0.50
0.40
0.30
0.70 MAX
0.65 TYP
1
1.89
1.74
1.59
PIN 1
INDICATOR
0.05 MAX
0.01 NOM
0.30
0.23
0.18
0.20 REF
Figure 44. 8-Lead Lead Frame Chip Scale Package [LFCSP_VD]
3 mm × 3 mm Body, Very Thin, Dual Lead
(CP-8-2)
Dimensions shown in millimeters
Rev. A | Page 13 of 16
061507-B
SEATING
PLANE
12° MAX
1.60
1.45
1.30
EXPOSED
PAD
(BOTTOM VIEW)
4
0.90 MAX
0.85 NOM
0.50
BSC
0.60 MAX
AD8663/AD8667/AD8669
3.20
3.00
2.80
8
3.20
3.00
2.80
1
5.15
4.90
4.65
5
4
PIN 1
0.65 BSC
0.95
0.85
0.75
1.10 MAX
0.15
0.00
0.38
0.22
COPLANARITY
0.10
0.80
0.60
0.40
8°
0°
0.23
0.08
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 45. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
8.75 (0.3445)
8.55 (0.3366)
8
14
1
7
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0039)
COPLANARITY
0.10
0.51 (0.0201)
0.31 (0.0122)
6.20 (0.2441)
5.80 (0.2283)
0.50 (0.0197)
0.25 (0.0098)
1.75 (0.0689)
1.35 (0.0531)
SEATING
PLANE
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 46. 14-Lead Small Outline Package [SOIC_N]
Narrow Body
(R-14)
Dimensions shown in millimeters
Rev. A | Page 14 of 16
060606-A
4.00 (0.1575)
3.80 (0.1496)
AD8663/AD8667/AD8669
ORDERING GUIDE
Model
AD8663ARZ 1
AD8663ARZ-REEL1
AD8663ARZ-REEL71
AD8663ACPZ-R21
AD8663ACPZ-REEL1
AD8663ACPZ-REEL71
AD8667ARZ1
AD8667ARZ-REEL1
AD8667ARZ-REEL71
AD8667ARMZ-R21
AD8667ARMZ-REEL1
AD8669ARZ1
AD8669ARZ-REEL1
AD8669ARZ-REEL71
1
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead LFCSP_VD
8-Lead LFCSP_VD
8-Lead LFCSP_VD
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead SOIC_N
Z = RoHS Compliant Part.
Rev. A | Page 15 of 16
Package Option
R-8
R-8
R-8
CP-8-2
CP-8-2
CP-8-2
R-8
R-8
R-8
RM-8
RM-8
R-14
R-14
R-14
Branding
A1U
A1U
A1U
A1E
A1E
AD8663/AD8667/AD8669
NOTES
©2007 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D06742-0-10/07(A)
Rev. A | Page 16 of 16