ALM-31122 700MHz - 1GHz 1-Watt High Linearity Amplifier Data Sheet Description Features Avago Technologies’ ALM-31122 is a high linearity 1 Watt PA with good OIP3 performance and exceptionally good PAE at 1dB gain compression point, achieved through the use of Avago Technologies’ proprietary 0.25um GaAs Enhancement-mode pHEMT process. x Fully matched, input and output All matching components are fully integrated within the module. This makes the ALM-31122 extremely easy to use. The adjustable temperature-compensated internal bias circuit allows the device to be operated at either class A or class AB operation. The ALM-31122 is housed inside a miniature 5.0 x 6.0 x 1.1 mm3 22-lead multiple-chips-on-board (MCOB) module package. x High linearity and P1dB x Unconditionally stable across load condition x Built-in adjustable temperature-compensated internal bias circuitry x GaAs E-pHEMT Technology[1] x 5V supply x Excellent uniformity in product specifications x Tape-and-Reel packaging option available x MSL-3 and Lead-free x High MTTF for base station application Top View VCTRL GND GND 18 19 20 21 22 1 16 2 NC x 31.6 dBm Output Power at 1dB gain compression GND 4 GND GND 13 5 RF_IN GND 12 11 10 9 GND 8 7 6 GND 3 14 NC 15 GND GND GND GND x 47.6 dBm Output IP3 VDD2 GND GND RF_OUT 17 x 15.6 dB Gain GND 31122 WWYY XXXX GND GND 900 MHz; 5V, 394mA (typical) VDD1 5.0 x 6.0 x 1.1 mm3 22-lead MCOB GND Specifications GND Component Image Bottom View Notes: Package marking provides orientation and identification “31122” = Device Part Number “WWYY” = Work week and Year of manufacture “XXXX” = Last 4 digit of Lot number x 52.5% PAE at P1dB x 2 dB Noise Figure Applications x Class A driver amplifier for GSM/CDMA Base Stations. x General purpose gain block. Note: 1. Enhancement mode technology employs positive gate voltage, thereby eliminating the need of negative gate voltage associated with conventional depletion mode devices. Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 80 V ESD Human Body Model = 200 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. Absolute Maximum Rating [2] TA=25°C Symbol Parameter Units Absolute Max. Vdd, max Device Voltage, RF output to ground V 5.5 Ids, max Device Drain Current mA 750 Vctrl,max Control Voltage V 5.5 Pin,max CW RF Input Power dBm 25 Pdiss Total Power Dissipation [4] W 4.125 Tj,max Junction Temperature oC 150 TSTG Storage Temperature oC -65 to 150 Thermal Resistance [3] θjc = 22 °C/W (Vdd = 5V, Idd = 400mA, Tc = 85 °C) Notes: 2. Operation of this device in excess of any of these limits may cause permanent damage. 3. Thermal resistance measured using Infra-Red measurement technique. 4. Board (bottom of the device) temperature TB is 25 °C. Derate 45.7mW/ °C for Tc > 59.3 °C. Product Consistency Distribution Charts[5, 6] CPK = 4.29 Std Dev = 0.208 CPK = 2.22 Std Dev = 7 .34 .36 .38 .40 .42 Figure 1. Ids; LSL = 340mA, nominal = 394mA, USL = 440mA 44 46 48 50 Figure 2. OIP3; LSL = 45dBm, nominal = 47.6dBm .44 Std Dev = 0.65 CPK = 5.73 Std Dev = 0.097 30 30.5 31 31.5 32 Figure 3. P1dB; LSL = 30dBm, nominal = 31.6dBm 52 32.5 33 40 45 50 Figure 4. PAE at P1dB; nominal = 52.5% 55 60 CPK = 4.21 Std Dev = 0.133 13.5 14 14.5 15 15.5 16 16.5 17 Figure 5. Gain; LSL=13.7dB, Nominal = 15.6dB, USL=17.3dB 2 17.5 Notes: 5. Distribution data sample size is 500 samples taken from 3 different wafers. TA = 25°C, Vdd = 5V, Vctrl = 5V, RF performance at 900MHz unless otherwise specified. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 6. Measurements are made on a production test board. Input trace losses have not been de-embedded from actual measurements. Electrical Specifications [7] TA = 25 °C, Vdd =5V, Vctrl=5V, RF performance at 900MHz, measured on demo board (see Figure 7) unless otherwise specified. Symbol Parameter and Test Condition Units Min. Typ. Max. Ids Quiescent current mA 340 394 440 Ictrl Vctrl current mA - 10.4 - Gain Gain dB 13.7 15.6 17.3 OIP3 [8] Output Third Order Intercept Point dBm 45 47.6 - OP1dB Output Power at 1dB Gain Compression dBm 30 31.6 - PAE Power Added Efficiency % - 52 - NF Noise Figure dB - 2.0 - S11 Input Return Loss, 50Ω source dB - -14 - S22 Output Return Loss, 50Ω load dB - -11 - S12 Reverse Isolation dB - -21 - Notes: 7. Measurements at 900MHz obtained using demo board described in Figure 6 and 7. 8. 900MHz OIP3 test condition: FRF1 - FRF2 = 10MHz with input power of -5dBm per tone measured at worse case side band. 9. Use proper bias, heat sink and de-rating to ensure maximum channel temperature is not exceeded. See absolute maximum ratings and application note (if applicable) for more details. 3 S-Parameter (Vdd=5V, Vctrl=5V, T=25ºC, matched 50 ohm) Freq (GHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) 0.1 -0.40 161.57 -56.46 -131.10 -74.70 50.37 -0.21 -167.06 0.2 -0.51 143.33 -20.88 155.28 -71.37 5.78 -0.42 152.48 0.3 -0.64 123.10 -4.90 78.86 -55.27 31.87 -0.81 119.79 0.4 -0.97 100.16 2.01 29.11 -45.70 -10.14 -1.48 83.90 0.5 -3.28 69.55 13.69 -47.22 -32.41 -84.32 -8.06 40.74 0.6 -6.13 54.69 16.12 -123.54 -27.69 -155.41 -9.00 54.17 0.7 -10.31 27.71 16.82 -180.00 -24.70 152.14 -9.89 -3.64 0.8 -23.89 55.10 16.74 130.34 -22.96 105.17 -13.61 -100.33 0.9 -14.77 105.79 15.74 87.60 -22.25 65.27 -12.57 176.42 1 -13.21 91.82 14.57 51.68 -21.84 31.78 -12.82 139.02 1.1 -13.47 100.03 13.64 17.13 -21.30 0.28 -13.65 141.76 1.2 -9.78 107.59 12.28 -18.54 -21.25 -33.26 -9.12 146.85 1.3 -6.06 89.99 10.25 -51.04 -22.17 -65.31 -5.21 126.94 1.4 -4.45 64.92 7.92 -79.94 -23.37 -90.84 -3.20 102.83 1.5 -4.09 37.55 5.59 -104.82 -24.18 -116.75 -2.25 80.60 1.6 -4.99 6.87 4.04 -131.36 -25.39 -141.93 -1.76 61.32 1.7 -8.65 -35.71 2.00 -161.35 -26.41 -170.62 -1.50 44.03 1.8 -16.99 -160.79 -0.68 162.55 -28.50 154.80 -1.25 28.09 1.9 -6.77 96.21 -5.56 123.70 -32.83 118.73 -1.00 12.40 2 -3.34 56.27 -12.69 98.31 -39.13 96.44 -0.86 -3.19 2.1 -2.06 28.78 -19.61 86.97 -45.68 87.50 -0.79 -18.37 2.2 -1.51 7.19 -27.76 81.73 -54.76 99.10 -0.87 -33.17 2.3 -1.23 -11.32 -36.07 112.46 -57.67 139.01 -0.86 -48.02 2.4 -1.05 -27.87 -37.39 154.20 -58.14 142.28 -0.80 -61.96 2.5 -0.95 -43.44 -36.83 170.21 -58.26 157.78 -0.88 -76.45 2.6 -0.89 -58.56 -36.30 174.51 -57.89 166.40 -0.84 -90.52 2.7 -0.84 -73.00 -37.01 171.55 -58.66 170.53 -0.81 -104.83 2.8 -0.82 -87.26 -38.58 166.13 -57.39 161.39 -0.83 -119.34 2.9 -0.81 -101.32 -40.69 163.37 -65.56 143.93 -0.85 -133.69 3 -0.82 -115.02 -44.64 165.47 -64.04 168.75 -0.89 -147.84 3.1 -0.73 -129.28 -51.00 177.12 -78.18 -179.56 -0.90 -162.35 3.2 -0.67 -142.15 -52.03 -119.97 -65.69 -57.72 -0.94 -176.34 3.3 -0.83 -155.79 -46.09 -86.42 -60.71 -73.52 -1.00 169.67 3.4 -0.77 -169.35 -42.29 -84.98 -57.55 -67.98 -1.04 156.06 3.5 -0.83 177.49 -40.33 -84.89 -55.64 -72.70 -1.09 142.51 3.6 -0.80 164.50 -37.48 -90.22 -53.33 -84.70 -1.15 129.44 3.7 -0.82 151.70 -36.01 -99.27 -52.54 -93.18 -1.13 116.92 3.8 -0.82 139.04 -35.53 -105.37 -50.50 -108.04 -1.13 104.78 3.9 -0.82 126.18 -34.79 -108.36 -50.05 -103.14 -1.12 92.23 4 -0.84 114.91 -33.51 -113.86 -47.08 -104.84 -1.07 80.08 4 Freq (GHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) 4.1 -0.88 102.20 -32.79 -120.00 -46.42 -121.38 -1.05 67.91 4.2 -0.81 90.15 -31.28 -121.41 -46.79 -129.51 -1.01 56.46 4.3 -0.84 78.32 -31.18 -140.85 -46.47 -123.31 -0.91 45.15 4.4 4.5 -0.95 -0.78 66.58 56.07 -31.86 -30.65 -141.72 -144.85 -44.69 -44.58 -133.44 -138.87 -0.94 -0.96 33.69 22.26 4.6 -0.76 45.08 -30.41 -152.26 -43.15 -136.57 -0.94 11.27 4.7 -0.77 33.87 -29.68 -156.30 -41.78 -150.84 -0.96 0.29 4.8 -0.76 23.52 -28.33 -161.68 -41.86 -156.50 -0.96 -10.69 4.9 -0.75 13.01 -28.46 -172.40 -41.55 -161.09 -0.96 -21.59 5 -0.81 2.46 -28.80 -173.45 -40.46 -161.45 -0.98 -32.30 5.1 -0.76 -7.68 -27.74 -177.47 -39.81 -170.16 -1.01 -43.07 5.2 -0.80 -17.85 -27.64 177.01 -38.68 -171.79 -1.05 -54.42 5.3 -0.80 -27.95 -26.57 176.02 -37.39 -179.28 -1.08 -65.25 5.4 -0.82 -37.99 -25.42 167.11 -37.00 173.82 -1.15 -75.86 5.5 -0.77 -47.71 -25.10 160.50 -36.18 170.82 -1.15 -88.15 5.6 -0.84 -58.06 -24.28 156.30 -35.02 167.10 -1.28 -98.26 5.7 -0.83 -68.29 -23.30 149.56 -33.80 160.20 -1.40 -110.35 5.8 -0.95 -78.17 -22.36 142.93 -32.53 153.88 -1.27 -123.04 5.9 -0.95 -88.30 -21.57 135.56 -31.57 145.84 -1.37 -134.92 6 -0.96 -98.85 -20.65 129.16 -30.18 140.35 -1.83 -147.93 5 Demo Board Schematic 3 Vsense Vsupply 8 Vctrl 1,2,19,20 R1 1,22 2 3,4 5 C3 21 C2 C5 Z1 17,18 Bias Input match 50-Ohms TL C1 C4 20 19 16 Output match 50-Ohms TL 6 12,13,14,15 7 8 9 10 Module Outline 11 C8 C7 C6 Size Value Description C1, C6 0805 2.2uF Ceramic Chip Capacitor C2, C4, C8 0402 0.1uF Ceramic Chip Capacitor C3, C5, C7 0402 10nF Ceramic Chip Capacitor R1 0805 0 Ohm Chip Resistor R2 0805 Not Used N/A Z1, Z2 0805 Not Used Zener Diode 5.6V (Optional) Z2 Vsupply R2 Circuit Symbol 1,2,19,20 Figure 6. Demo board application schematics and components table Demo Board Layout Pins pointing out of the page Unit is on top 20-pin Connector 10 1 2 3 4 5 6 7 8 9 10 1 20 19 18 17 16 15 14 13 12 11 Pins 1,2,19,20 = Vsupply = Vdd Pin 3 = Vsense (optional) Pins 5,6,15,16 = GND Pin 8 = Vctrl RF input Other pins are not used Figure 7. Demo Board Layout Diagram 1. Recommended PCB material is 10 mils Rogers RO4350, with FR4 backing for mechanical strength. 2. Suggested component values may vary according to layout and PCB material. 6 RF output ALM-31122 Typical Performance TA = +25ºC, Vdd = 5V, Vctrl = 5V, Input Signal=CW unless stated otherwise. 480 460 420 OIP3 (dB) Ids (mA) 440 400 380 360 340 320 -40 -30 -20 -10 0 0.7 33 Gain (dB) P1dB (dBm) 32 31 30 29 85ºC 25ºC -40ºC 28 0.75 0.8 0.85 0.9 Frequency (GHz) 0.95 1 -5 -10 -10 S22 (dB) S11 (dB) 0.7 -5 -15 85ºC 25ºC -40ºC -20 0.85 0.9 Frequency (GHz) Figure 12. Over temperature S11 vs Frequency 0.75 0.8 0.85 0.9 Frequency (GHz) 1 0.95 1 0.95 -15 85ºC 25ºC -40ºC -20 -25 7 0.95 85ºC 25ºC -40ºC 0 0.8 0.85 0.9 Frequency (GHz) 20 19 18 17 16 15 14 13 12 11 10 0 0.75 0.8 Figure 11. Over temperature Gain vs Frequency Figure 10. Over temperature P1dB vs Frequency 0.7 0.75 Figure 9. Over temperature OIP3 vs Frequency 34 0.7 85ºC 25ºC -40ºC 10 20 30 40 50 60 70 80 90 Temperature (ºC) Figure 8. Ids vs Temperature 27 52 51 50 49 48 47 46 45 44 43 42 1 -25 0.7 0.75 0.8 0.85 0.9 Frequency (GHz) Figure 13. Over temperature S22 vs Frequency 0.95 1 -20 85ºC 25ºC -40ºC 3GPP WCDMA, Test Model 1 + 64DPCH, +/- 5MHz Offset 85ºC 25ºC -40ºC -25 -30 ACPR (dBC) S12 (dB) -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -35 -40 -45 -50 -55 0.7 0.75 0.8 0.85 0.9 Frequency (GHz) Figure 14. Over temperature S12 vs Frequency 0.95 1 -60 20 21 22 23 24 Output Channel Power (dBm) Figure 15. Over temperature ACPR vs Channel Power at 900MHz 25 PCB Layout and Stencil Design 5.80 0.50 Pin 1 0.50 0.41 5.73 0.35 0.35 0.54 0.45 0.41 0.35 0.50 2.79 4.80 4.20 0.45 1.74 0.39 1.30 0.77 1.17 0.30 0.72 0.30 0.85 0.45 0.60 0.70 0.30 0.45 0.35 0.63 0.30 Stencil Opening PCB Land Pattern 5.80 5.73 4.74 4.80 Combines Land Pattern and Stencil Layout Note: All dimensions are in millimeters. 8 0.45 0.45 4.74 Package Dimensions 6.00±0.10 0.60 Pin 1 31122 WWYY XXXX 5.00±0.10 1.05±0.10 Side View Top View (8x) 0.21 0.07 (All Metal and SM Gaps) 17 18 19 21 20 22 1 (8x) 0.210 (12x) 0.16 (8x) 0.50 sq 16 2 15 3 14 4 13 5 12 11 10 9 8 7 6 (2x) 1.30 (2x) 2.40 (4x) 0.60 0.10 (6x) 0.50 (2x) 1.60 (4x) 0.70 Notes: 1. All dimenions are in milimeters 2. Dimensions are inclusive of plating 3. Dimensions are exclusive of mold flash and metal burr Bottom View Part Number Ordering Information Product Family Part Number No. of Devices Container ALM31122-TR1G 1000 7” Reel 700MHz-1GHz 1.7- 2.7GHz 3.3-3.9GHz 0.5W MGA-30116 MGA-30216 MGA-30316 1W ALM-31122 ALM-31222 ALM-31322 2W ALM-32120 ALM-32220 ALM-32320 ALM31122-TR2G 3000 13” Reel ALM31122-BLKG 100 antistatic bag 9 Frequency Band Output Power Device Orientation REEL USER FEED DIRECTION 31122 WWYY XXXX 31122 WWYY XXXX CARRIER TAPE 31122 WWYY XXXX TOP VIEW USER FEED DIRECTION END VIEW COVER TAPE Tape Dimensions 4.00±0.10 See Note #2 Ø1.55±0.05 Section B-B (R0.50) B 8.00±0.10 0.30±0.05 Ko Ao 10 Section A-A Ø1.50 (Min) 12.00±0.30 Bo 1.75±0.10 5˚ All Around A 5.50±0.10 2.00±0.05 B Reel Dimension - 7 inch 6.25mm EMBOSSED LETTERS LETTERING THICKNESS: 1.6mm SLOT HOLE "a" SEE DETAIL "X" Ø178.0±0.5 SLOT HOLE "b" FRONT BACK 6 PS SLOT HOLE(2x) 180° APART. 6 PS RECYCLE LOGO SLOT HOLE "a": 3.0±0.5mm(1x) SLOT HOLE "b": 2.5±0.5mm(1x) FRONT VIEW 1.5 MIN. +1.5* -0.0 +0.5 Ø13.0 -0.2 Ø20.2 MIN. ° R10.65 120 65° 12.4 45° R5.2 BACK VIEW Ø178.0±0.5 Ø51.2±0.3 18.0* MAX. SEE DETAIL "Y" DETAIL "X" 3.5 DETAIL "Y" (Slot Hole) 1.0 Ø55.0±0.5 45° EMBOSSED RIBS RAISED: 0.25mm, WIDTH: 1.25mm 11 BACK Ø178.0±0.5 FRONT Reel Dimension - 13 inch 11 12 1 2 3 4 0 2 10 9 7 6 5 DATE CODE 12MM 8 EMBOSSED LETTERING 16.0mm HEIGHT x MIN. 0.4mm THICK. Ø329.0±1.0 HUB Ø100.0±0.5 6 PS 02 12 12 10 911 876534 MP N CPN EMBOSSED LETTERING 7.5mm HEIGHT EMBOSSED LETTERING 7.5mm HEIGHT 1.5 (MI N.) FRONT VIEW EMBOSSED LINE (2x) 89.0mm LENGTH LINES 147.0mm AWAY FROM CENTER POINT +0.5 -0.2 20.2(MIN.) Ø13.0 11.9-15.4** +2.0* 12.4 -0.0 Ø16.0 ESD LOGO 6 PS RECYCLE LOGO Detail "X" SEE DETAIL "X" Ø100.0±0.5 Ø329.0±1.0 6 PS R19.0±0.5 BACK VIEW SLOT 5.0±0.5(3x) Ø12.3±0.5(3x) For product information and a complete list of distributors, please go to our web site: 18.4 MAX.* www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies Limited. All rights reserved. AV02-1178EN - October 21, 2010