AND520HW Ultra Bright LED Lamps Weight: 0.31g Unit: mm AND520HW InGaN High Brightness White Light Emission • 5 mm (T1-3/4) Package • All plastic mold type, clear colorless lens • Low drive current: 1 to 20 mA DC • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • Wide viewing angle - 30º • High reliability • Pb Free - RoHS Compliant Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V PD 100 mW Power Dissipation Operating Temperature Range TOpr -40 to 85 C Storage Temperature Range TSig -40 to 100 C Pulse Forward Current IFP 100 mA – – – Electrostatic Discharge ESD 4,000 V Soldering Temp (Time ≤ 5 Sec) TSol 260 ± 5 °C (Duty Cycle 1/10 @ 1kHZ) Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 3.5 4.0 V Reverse Current IR VR = 5 V – – 50 µA Luminous Intensity IV IF = 20 mA 2,850 4,000 – mcd Chromaticity Coordinates Full Viewing Angle x IF = 20 mA – .29 – y IF = 20 mA – .28 – 2 θ 1/2 IF = 20 mA – 25 – degree Precaution Please be careful of the following: 1. Soldering temperature: 260 C max. Soldering time: 5 sec. max. Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 2/11/08 AND520HW InGaN High Brightness White Light Emission Ultra Bright LED Lamps IF – VF IV – VF 50,000 30,000 Ta = 25°C 30 Luminous Intensity IV (mcd) Forward Current IF (mA) 50 10 5 3 Ta = 25°C 10,000 5,000 3,000 1,000 500 1 2.5 2.75 3.0 3.25 3.5 3.75 200 4.0 1 3 Forward Voltage VF (V) 10 30 50 100 300 500 Relative Luminous Intensity – Wavelength IV – TC 3 1.0 Relative Luminous Intensity Relative Luminous Intensity 5 Forward Current IF (mA) 1 0.5 0.3 0.1 -20 0 20 40 60 IF = 20 mA Ta = 25°C 0.8 0.6 0.4 0.2 0 400 80 450 500 550 600 650 700 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 100 2/11/08