AZ7671 10 AMP SUBMINIATURE POWER RELAY FEATURES • • • • • • Small footprint Low cost Epoxy sealed version available 10 Amp switching UL, CUR E44211 TuV pending CONTACTS GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 5 A 240 VAC Res. Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Max. switched power: 150 W 1250 VA Insulation Resistance 1000 megohms min. at 20°C 500 VDC 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F), standard Max. switched current: 10 A Storage Max. switched voltage: 30 VDC or 277 VAC Vibration 0.062" DA at 10–50 Hz precautions must be taken. Please contact the factory. Shock 100g for 11ms 1/2 sine pulse 5A at 250 VAC 10A at 125 VAC 4.2 A at 277 VAC Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds 1/4 HP at 120/240/277 VAC Max. Solvent Temp. 80°C (176°F) TV - 5 at 120 VAC Pilot Duty at 24 VA, 24 VAC 125 VA at 120/240/277 VAC C150 at 120 VAC Max. Immersion Time 30 seconds Weight 6 grams *Note: If switching voltage is greater than 30 VDC, special Rated Load UL, CUR TUV Material Resistance -40°C (-40°F) to 130°C (266°F) 5A at 250 VAC 5A at 28 VDC silver nickel <100 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) 253 mW standard 113 mW sensitive Max. Continuous Dissipation 1.25 W at 20°C (68°F) ambient Temperature Rise 41°C (74°F) at nominal coil voltage, standard 22°C (40°F) at nominal coil voltage, sensitive Temperature Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 10/2/08 W AZ7671 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 3 Must Operate VDC 2.25 Max. Continuous VDC 3.9 ORDER NUMBER* Coil Resistance ± 10% 20 Form A (SPST) Form C (SPDT) AZ7671–1A–3D AZ7671–1C–3D 5 3.75 6.5 55 AZ7671–1A–5D AZ7671–1C–5D 6 4.5 7.8 80 AZ7671–1A–6D AZ7671–1C–6D 9 6.75 11.7 180 AZ7671–1A–9D AZ7671–1C–9D 12 9.0 15.6 320 AZ7671–1A–12D AZ7671–1C–12D 18 13.5 23.4 720 AZ7671–1A–18D AZ7671–1C–18D 24 18.0 31.2 1,280 AZ7671–1A–24D AZ7671–1C–24D *Add suffix “E” for epoxy sealed version. SENSITIVE RELAYS COIL SPECIFICATIONS Nominal Coil VDC 3 Must Operate VDC 2.25 Max. Continuous VDC 3.9 ORDER NUMBER* Coil Resistance ± 10% 45 Form A (SPST) AZ7671–1A–3DS 5 3.75 6.5 125 AZ7671–1A–5DS 6 4.5 7.8 180 AZ7671–1A–6DS 9 6.75 11.7 400 AZ7671–1A–9DS 12 9.0 15.6 720 AZ7671–1A–12DS 18 13.5 23.4 1600 AZ7671–1A–18DS 24 18.0 31.2 2800 AZ7671–1A–24DS *Add suffix “E” for epoxy sealed version. MECHANICAL DATA PC BOARD LAYOUT .059 [1.50] .073 [1.85] .417 MAX. [10.59] .740 MAX. [18.80] .100 [2.54] .058 [1.49] .300 [7.62] 5xø.052 - FORM C 4xø.052 - FORM A [ø1.3] .441 [11.20] FORM C ONLY VIEWED TOWARD TERMINALS WIRING DIAGRAM .614 MAX. [15.59] .147 [3.73] 5 1 .073 [1.85] 4 2 3 FORM C ONLY VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 10/2/08 W