AZ8222 SUBMINIATURE ULTRA-SENSITIVE DIP RELAY FEATURES • • • • • • • • • • • Low profile for compact board spacing DC coils to 48 VDC Bifurcated crossbar contacts Ultra-sensitivity, 84 mW pickup Life expectancy to 10 million operations High switching capacity, 60 W, 125 VA Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) Ratings Resistive load: Max. switched power: 60 W or 125 VA Max. switched current: 2 A Max. switched voltage: 120 VDC or 240 VAC Rated Load UL 2.0 A at 30 VDC 1.0 A at 125 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 2.0 A 30 VDC Res. Operate Time (typical) 6 ms at nominal coil voltage Release Time (typical) 4 ms at nominal coil voltage (with no coil suppression) Material Silver nickel, gold plated Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms between open contacts 1500 Vrms contact set to contact set Resistance < 50 milliohms initially Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) standard -40°C (-40°F) to 80°C (176°F) sensitive -40°C (-40°F) to 85°C (185°F) ultra-sensitive -40°C (-40°F) to 105°C (221°F) COIL Power At Pickup Voltage (typical) Storage 180 mW standard 100 mW sensitive 84 mW ultra-sensitive Vibration 1.5 mm DA at 10–55 Hz Max. Continuous Dissipation 1.2 W at 20°C (68°F) Shock 50 g 11 ms 1/2 sine Temperature Rise 34°C (61°F) standard 23°C (41°F) sensitive 19°C (34°F) ultra-sensitive Enclosure P.B.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) 1. All values at 20°C (68°F). Max. Immersion Time 30 seconds 2. Relay may pull in with less than “Must Operate” value. Weight 5 grams Temperature Max. 105°C (221°F) NOTES 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. 12/17/03W AZ8222 RELAY ORDERING DATA STANDARD COIL SPECIFICATIONS Coil Resistance ± 10% Must Operate VDC ORDER NUMBER Nominal Coil VDC Max. Continuous VDC 3 4.5 30 2.3 4.5 5 6 9 12 15 24 48 6.0 8.0 10.0 14.5 18.5 22.0 35.5 56.0 63 90 130 280 450 625 1600 4000 3.2 3.8 4.5 6.8 9.0 11.3 18.0 36.0 Nominal Coil VDC Max. Continuous VDC 3 6.0 45 2.3 4.5 9.0 101 3.2 AZ8222–2C–4.5DSE 5 10.0 125 3.8 AZ8222–2C–5DSE 6 12.0 180 4.5 AZ8222–2C–6DSE 9 18.0 405 6.8 AZ8222–2C–9DSE 12 24.0 720 9.0 AZ8222–2C–12DSE 15 30.0 1125 11.3 AZ8222–2C–15DSE 24 48.0 2880 18.0 AZ8222–2C–24DSE AZ8222–2C–3DME AZ8222–2C–4.5DME AZ8222–2C–5DME AZ8222–2C–6DME AZ8222–2C–9DME AZ8222–2C–12DME AZ8222–2C–15DME AZ8222–2C–24DME AZ8222–2C–48DME SENSITIVE COIL SPECIFICATIONS Coil Resistance ± 10% Must Operate VDC ORDER NUMBER AZ8222–2C–3DSE ULTRA-SENSITIVE COIL SPECIFICATIONS* Nominal Coil VDC Max. Continuous VDC 3 Coil Resistance ± 10% Must Operate VDC ORDER NUMBER 7.0 60 2.3 4.5 10.4 135 3.2 AZ8222–2C–3DSSE AZ8222–2C–4.5DSSE 5 11.5 167 3.8 AZ8222–2C–5DSSE 6 13.8 240 4.5 AZ8222–2C–6DSSE 9 20.8 540 6.8 AZ8222–2C–9DSSE 12 27.7 960 9.0 AZ8222–2C–12DSSE 15 34.6 1500 11.3 AZ8222–2C–15DSSE * Contact to contact dielectric strength is 500 Vrms. MECHANICAL DATA 0.394MAX [10.0] 0.795MAX [20.2] 8X Ø0.035 [ Ø0.9] 0.453MAX [11.5] 0.047 [1.2] PCB Layout 0.300 [7.62] 0.118 [3.0] 0.300 [7.62] 0.500 [12.7] 0.700 [17.78] 0.047 [1.2] 0.016 [0.4] 0.024 [0.6] 0.300 [7.62] 0.500 [12.7] 0.700 [17.78] 0.300 [7.62] Wiring Diagram 1 4 6 8 16 13 1 9 Viewed toward bottom Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 12/17/03W